ActionScript 2.0 :: MovieClip Loader Displays Only On One Frame?
Aug 26, 2008
I have wriiten a code on Frame1 to load an image in a MovieCLip(already on Stage). Now that's only visible in Frame1, if i goto some other frame example-5 and use "insert Keyframe" or "Insert Blank Keyframe" it shows me nothing inside the Movie Clip. But when i copy the code from Frame 1 then it shows the image inside at Frame where the code has been copied.
So is it limited to only 1 frame in which ActionCode is there? Or how do i tell that keep displaying image inside the MovieClip.
View 3 Replies
Similar Posts:
Aug 22, 2003
The situation is this: Im trying to make a pre-loader that displays the load amount in text as a % and has a loading bar that will only load when the movie loads. When the movie is fully loaded the loading bar fill be full and it will display 100%, when the movie is half full it will be 50% and the bar will only be half way across. If I wanted to make the loading bar a specific width how would I do it?? At the moment the bar only seams to want to be 100 wide. The script im using so far is:
[Code]...
View 4 Replies
Jan 31, 2007
im trying to make a pre-loader, that based on the percent loaded, displays text. So at 5% it says "loading" and at 10% "still loading" , etc. Im guessing there is a way to say percenttotal=5, entertext=still loading target=instancenameoftextbox I've gotten the loader tutorial on the site here to work, i just want to add this to it.
View 2 Replies
Apr 7, 2012
the file loads correctly but the loading screen only flashes up at the end.The only thing being exported in frame 1 is the loader image, and that is extremely small.Is it possible that there's a queue of things being loaded and the loader image is at the bottom of that queue? Since that was one of the last things added to the project
View 1 Replies
Dec 9, 2005
Explaination: MX 04' Pro Thumbnail Nav. loading images with XML Loader resizes and displays images when users click on Nav. reading XML Problem: Users click Thumbnail Nav. first image gets loaded and loader resizes to image. However the next choice by user on thumbnail click, the second image doesnt get resized in the loader. It goes beyond holder. Here is my code for Thumbnail and Loader:
[Code]....
Now the first image loads fine and the loader sizes to file from XML. However, when users click second choice from Thumbail the loader doesnt resize to new image size. It only gets resized on the first selction or if users click the next or prev. buttons then the images fade correctly but nothing fades back in. Now if they do hit next or prev and then hit a thumbnail option it loads and resizes.
View 1 Replies
Nov 28, 2011
Using CS 5.5, I am using a single scene with buttons that all appear on the first frame along with code snippet AS also on the first frame that when clicked, takes the user to a different frame. Everything seems to work fine, except, after you go to frame 15 and click on one of the buttons that take you to one of the earlier frames, the text from frame 15 still displays on those earlier frames. The text on frame 15 is on a different layer and does not exist anywhere else until frame 15.
View 3 Replies
Dec 28, 2006
i've got a problem. i have an external text which loads and displays normally only when that frame is loaded for first time. i'm using getDate because it changes every day. it's peculiar because all of other texts which are external also,always load just fine (first time and every time when return to previously visited frame).
View 6 Replies
Aug 24, 2009
how to create an image gallery that loads external bitmaps. It also has some nice fade in/fade out effects using Tweener. I was wondering, what would I need to modify from my code to load MovieClips from the library instead of the external JPEGs.
Code:
import caurina.transitions.Tweener;
var btn:Object;
var disabledBtn:Object;
[Code].....
View 8 Replies
Aug 7, 2010
On the main timeline in frame 1 var slideshow:Slideshow = new Slideshow();if (Object(slideshow)){trace("yes");}when the movie runs the trace works.
I have MovieClip which is on the stage from frame 1 onward the MovieClip on stage is a button which displays a dropdown menu when clicked the menu consist of other MovieClips one of the menu item MC's is set to run
if (Object(root.slideshow)){trace("yes");}when I click I get this message:1119: Access of possibly undefined property slideshow through a reference with static type flash.display:DisplayObject.
View 5 Replies
Apr 8, 2009
I have a movieclip that displays a slideshow. Starting a few days ago I get a error message from Flash Player 10 saying
"TypeError: Error #2007: Parameter url must be non-null.
at flash.display::Loader/_load()
at flash.display::Loader/load()
at slides/switchPhoto()
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()"
Here is the actionscript package for the error
package{
import flash.display.MovieClip;
import flash.display.Loader;
import flash.display.LoaderInfo;
import flash.events.*;
[Code] .....
View 5 Replies
Apr 26, 2010
why i keep getting Parameter child must be non-null. And my code won't display 5 enemyBlock objects onto the stage but only just one.
returns:
TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/addChild()
at flash.display::Stage/addChild()
[Code]....
View 2 Replies
Feb 17, 2009
I've hit a brick wall here. I have a Flash file that displays fine in IE. It also displays fine when ran as a SWF. However, in FireFox, it does not display my scroller. I developed the Scroller component dynamically... everything is drawn from scratch, no library movieClips, etc. I'm starting to think that could be the cause? I've tried many different things:
[Code]...
View 5 Replies
Feb 15, 2009
I've hit a brick wall here. I have a Flash file that displays fine in IE. It also displays fine when ran as a SWF. However, in FireFox, it does not display my scroller. I developed the Scroller component dynamically... everything is drawn from scratch, no library movieClips, etc. I'm starting to think that could be the cause? I've tried many different things: Changed the HTML code to bare bones embedding code.Recompiled in Flex.... same result!Tested on another computer... it worked fine! However, I tested on another computer with FireFox... same problem.
It's so weird.I seperated the Image Slide show component from the Scroller... the scroller had the same effect... didn't display in FF.Played around with WmodeChecked my code for addChild problems, visibilty, alpha properties... nothing out of the ordinary.Asked God.Drank some Gin.Took a break and came back to it.I've reseached Google and the most I could come up with is to compile using FP10. It is FP10. I'm using CS3 and FlashDevelop. When I right click on my Flash file, it does indeed display FP10. Same with Flex.
[Code]...
View 6 Replies
Apr 22, 2009
I want to jump to a specific frame in the swf I load using the Loader class. As it is now it goes directly to frame1 in the file, which I dont really want it to do. I'm using Flash CS4
View 2 Replies
May 9, 2009
This is a bit of an odd-ball problem. I've created a website 524 frames long, but am creating the pre-load bar *after* the website is done. I could move all the frames a few over, but this would require remapping all my many, many buttons. What I've done then, is told Frame 1 to go to Frame 525, and put the preloader there. I should note the site works perfectly without the pre-loader, I just want it to be smooth once it makes it online.The following code is being used for the first frame (frame 525) of the pre-loader:
bytes_loaded = Math.round(this.getBytesLoaded());bytes_total = Math.round(this.getBytesTotal());getPercent = bytes_loaded/bytes_total;this.loadBar._width = getPercent*100;this.loadText = Math.round(getPercent*100)+"%";if (bytes_loaded ==
[code].....
View 3 Replies
May 11, 2011
I have a banner as the header on a website. The file is about 150K. I want the banner to load (relatively) instantly (without the animations). My current solution is to take a screenshot of the first frame and create a preloader that just displays the screenshot. A really simple solution to this would be a setting (or something) that just caches the first frame as a bitmap and loads that first, then displays it until the entire file is loaded.
View 1 Replies
Sep 14, 2009
If i add a loader to every frame of my website, will it speed up my initial preloader speed?if anybody can answer it will save me alot of time with trial and error.
View 2 Replies
Aug 11, 2009
What's the most efficient way of putting a basic preloader and XML loader together in the same frame?
Like, what works the best in terms of order of operation? Or if used at the same time should the XML loader have the preloader in the Progress portion or at the on complete portion?
View 0 Replies
Feb 8, 2010
im doing a website and using a flash header. this has some movie clips and it needed a loader. in Firefox it will lock up when clicking from page to page and stop on the full loader bar. im using cs3 master collection and as3 the website is paradisebeergarden.ph this is driving me nuts as it is only doing this in Firefox!
View 4 Replies
Jul 9, 2011
In the first frame of that movieclip, I'm importing an external swf with Loader class,(Using actionscript2 but my main flash page using Actionscript3),It is loading well but when i pass to second frame and return to the first frame again, the Loader doesn't work. (i'm using addChild(); to show external swf)
View 9 Replies
Feb 13, 2010
I am a new Flash user (took the lynda.com Essentials training and building a website with Flash). As such, I followed pretty closely the directions I had written down to build a basic website with my bio, contact form, favorite links page. Until I can figure out how to make the pages in my book turn, I don't have any transition included. My website in html is [URL]..
the problem I am having seemed to happen when I added a pre-loader frame to my scene and now I can't get the error to go away even when I delete that slide and code.
[Code]...
View 1 Replies
Mar 22, 2009
I've been loading multiple SWF using the loader class and Frame Labels. I get this error script when clicking my drop down menu buttons:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at ZimIndex7_fla::mcMenu_5/buttonClick()[ZimIndex7_fla.mcMenu_5::frame1: 6]
View 1 Replies
May 16, 2009
how I access variables in a frame on the stage with code from a frame within a movieclip?(basically passing variables from a stage frame to a movieclip frame)
View 4 Replies
Mar 26, 2004
i have a movie clip with a dynamic text field being animated...i have a text file with this in it
&textline1=time
&textline2=place
&textline3=year
&textline4=month
now how do i make the movie clip to first go from frame 1 to 10( last frame in teh movieclip) with the text time and then when the movie clip starts again it should say place and so on and so forth.. depending on how many textline variables i define in the text file?
View 5 Replies
Sep 14, 2010
If I removeChild frame animated Movieclip, will it automatically stop running the frames inside it? Actually without calling mc.stop();
View 2 Replies
Mar 8, 2005
I'd like my Flash site to be bi-lingual. What I have currently is a Flash movie with an empty Movie Clip which then allows users to go from movie to movie. The movies are all small movieClips that are loaded into the empty movieclip on demand. There is some video and text in each of the 30 movieClips.
Here is sample of code that i'm using to call up next MovieClip.
[Code]...
My solution for the bilingual version is to create a separate frame with the French version + video and then when user presses the French button they are directed to that frame. This way I could easily create the French text within the one movie. however i don't know the Actionscript code to call up a movieClip to play from frame 10, and not frame 1.
View 3 Replies
Jul 16, 2010
i'd like to control MovieClip timeline witch contain several DisplayObject (like Sprite, Button, ...) these DisplayObject have Motion (AnimatorFactory). How can i do seek frame-by-frame the MovieClip Timeline and use the currentFrame to control all Motion child.
[Code]....
View 18 Replies
Nov 25, 2011
This is an if stament on a frame on the root. I want to loop Carrera(a lenghthy movieclip) from frame 2 back to frame 1. (For testing purposes) This is the code:
[Code]...
View 3 Replies
Jan 4, 2011
I was having trouble even knowing quite what to search for so I figured asking a question in a forum would be the best way to go. Currently I am making an application where I have multiple movieclips of equal duration on multiple frames. For example, movieclip_1 is on frame 1 and is 40 frames long. There is currently a scrub bar that scrubs through the 40 frames of movieclip_1. On frame 1 of the Scene there are also buttons with the actions to gotoAndStop on frame 2, frame 3, and frame 4. Frame 2 contains movieclip_2, frame 3 contains movieclip_3, and so on. The functionality of this is that it shows medical conditions progressing from different angles and when a button is clicked the display shows a close up of just that one angle. As expected, without any actions on the movieclips navigating from one frame to the next brings up the proper new movieclip but they always begin at frame 1. What I would like to be able to do is somehow have my movieclips know what frame they are on so when a button is clicked the application would go to that frame and open that movie clip to the same frame as the previous one that was just navigated from.
View 3 Replies
Mar 27, 2012
I got a MovieClip filled with a lot of others clips... When I change de X or Y value of this first MovieClip the frame rate slows down for during 1 frame. For exemple... I created a counter that returns around 30 mseconds every frame, but when I do this X or Y change the return is around 400 mseconds... When I try to fill the first MovieClip with less information it goes faster, about 100+-200 mseconds...
View 6 Replies
