Consider the code:
var a:Array = new Array();
a.push({str:"a", val:2});[code]....
Why does it change the original order - shouldn't the output be a,c,d,b,e - whereas the output is c,d,a,b,e? I tried it in both AVM1 and AVM2.
I am creating an image gallery and the images change but change right back to the original image. I had it working yesterday but today it doesn't work.
[Code]...
I have a template that I am editing. I have created new layers by duplicating an existing layer. The problem I am having is that anytime I make a change to a duplicated layer it changes the original as well. ie if I attempt to edit the action script on the new layer it changes the action script on the original? It seems as though they are linked and I can not find a way to unlink them??
View 1 RepliesI am having problems with the
getcoord = xycoordMap[x][y].split(":");
xcoord = getcoord[0].toString();
ycoord = getcoord[1].toString();
xcoord0 = xcoord + "";
ycoord0 = ycoord + "";
code... as you can see in the code I converted three times just to verify that I was working with strings. What happens if you run this script, the variables xcoord0 and ycoord0 magicly change in value when they are used in the IF statement (see the traces). What is going on?? what am I doing worng?? Is there an issue with my 2d Array?
[Code]...
I am having problems with the
getcoord = xycoordMap[x][y].split(":");
xcoord = getcoord[0].toString();
ycoord = getcoord[1].toString();
xcoord0 = xcoord + "";
ycoord0 = ycoord + "";
code... as you can see in the code I converted three times just to verify that I was working with strings. What happens if you run this script, the variables xcoord0 and ycoord0 magicly change in value when they are used in the IF statement (see the traces). What is going on?? what am I doing worng?? Is there an issue with my 2d Array?
[Code]....
I used the example of the "Changing Colors Using ActionScript" from your site to add to a rollover state on a movieClip. It works fine but how to I reverse the state when I rollOut. e.g. goes to black on rollOver and then back to its original full color image on rollOut?
View 3 RepliesI searched and found the code below which works fine to change the color. What do I do to make the color go back to it's original color on mouseout?
pedals.buttonMode = true;
pedals.addEventListener(MouseEvent.ROLL_OVER, changeColor);
function changeColor(e:MouseEvent):void {
var color_transform:ColorTransform=pedals.transform.co lorTransform;
color_transform.color=0x004433;
pedals.transform.colorTransform=color_transform;
}
How is it done? All I've seen on the web is how to change the color. Well how about going back. I'm talking about a MC with many colors. I can't just change back to a single hexadecimal color.
I can accomplish the change as it passes over a frame, but I can't get it to change back.
In the frame is this:
Code:
cHurtColor = new Color(_root.compMC);
cHurtColor.setRGB(0x00FF33);
All I've seen on the web is how to change the color. Well how about going back. I'm talking about a MC with many colors. I can't just change back to a single hexadecimal color.I can accomplish the change as it passes over a frame, but I can't get it to change back.[code]
View 6 RepliesI have been deveolping my new site, which is in it's early stages and have most things working ok but i need to open new windows from buttons in the main swf file. please check out my link to see for yourself! new windows load in the same window ad the main swf. [URL] I have been using this code on the thumbs on my design and illustration sections
on (release) {
getURL("javascript:NewWindow=window.open('url.html ','newWin','width=1133,height=425,left=425,top=113 3,screenX=1133,screenY=425');NewWindow.focus();voi d(0);");
}
each of the thumb windows being a different specified size.
Given an XML file similar to this:
Code:
<class>
<student>
[code].....
Is there any way in Flex where in we can sort an arraycollection based on strings .I have a dataprovider with strings like "Critical" "High" "Medium" "Low" where in I need to sort it in such a way that I need Critical to be displayed on the top and next High , Medium and Low follows.
View 1 RepliesI have an advancedDataGrid and I would like to sort the adg according one AdvancedDataGridColumn(studyDate) which use strings in format DD/MM /YYYY(I receive like this from the server):But i find another problem, I need to sort the columns of the adg the first time it displays so I used the following function but It doesn't sort from the recent day to old one, I do not know what I can I do cause I set sort.descending= true, any ideas?[code]
View 1 RepliesI have a one comboBox that I fill as:
for (var key:String in values) {
conns.addItem(key);
}
After that I sorted my ComboBox as:
private function sortConnection():void {
var dataSortField:SortField = new SortField();
dataSortField.name = "data";
dataSortField.numeric = true;
var numericDataSort:Sort = new Sort();
numericDataSort.fields = [dataSortField];
conns.sort = numericDataSort;
conns.refresh();
}
And on finish I want to select item on my specific value in ComboBox. How can I do that? I try:
for (var ii:Number=0; ii<combo.rowCount; ii++) {
var item:String = combo.getChildAt(ii);
if (item == name) {
index = ii;
}}
But does not work. I do not know where I made mistake, and how I can select on specific item in my combobox.
I have been trying to sort an XMLListCollection following instructions like this for some time, without success. Here's the relevant code:
<fx:Declarations>
<s:HTTPService id="photoServ" url="pics.xml" resultFormat="e4x"/>
<s:XMLListCollection id="photoList" source = "{photoServ.lastResult.photo}"/>
[code]......
i'm trying to sort out some xml entries based on an attribute when you click a button. an example of my xml is below.
Code:
<list>
<entries cat="all">
[code].....
i just started with isometrics. i got the 3d to 2d coordinates working but i cant seem to get the z sorting to work.
View 2 Repliesi just started with isometrics. i got the 3d to 2d coordinates working but i cant seem to get the z sorting to work. please check the fla if you have knowledge in the subject.
View 6 RepliesTrying to re-sort an array of objects from:
var arr:Array = new Array({num:0},{num:1},{num:2},{num:3})
to
var arr:Array = ({num:0},{num:3},{num:1},{num:2})
- Put a bunch of MC's on the stage distributed horizontally.
- Store them in an array.
- yourArray.sortOn("x", Array.DESCENDING)
- loop though the now "sorted" array and trace their x property.
Doesn't work, does it? If it did, shuffle them up and try again (sometimes, perhaps randomly they will be in order).
I'm trying to bring XML nodes into an array so I can sort them in alphabetical order, then display the data in some textfields in a movieclip.I've managed to get the XML displaying fine in the movieclips and all the data in the arrays, but the problem is I'm not sure where to use name.sort();. Right now you can see I have it at the start of the loop that places all the data in, but it will only sort as it populates and hence becomes pointless.Is there a way to add all the data into an array, sort it, THEN display all the data in my movieClips?My XML looks like this:
PHP Code:
<example><item><name>Zack</name><donation>99</donation><message>Zacks msg</message></item><item><name>John</name><donation>70</donation><message>Johns msg</message></item><item><
[code]......
Rows B, D and E do not sort correctly, basically because I am assuming they have numbers with unmatching or too many places. I can not find any help online with this. The columns with percentages work fine unless they go over 99%. ?[code]...
View 7 RepliesI have this array
Code:
_global.itemsSelected[1][0]=20;
_global.itemsSelected[1][1]=60;
_global.itemsSelected[1][2]=10;
[Code]....
In the project I'm working on, there are towers the user can place. However, it you place a tower higher then another one, it appears infront of that one, which looks weird.I want to be able to arrange all the towers so that that does not happen.There is an sprite called towerHolder holding, which all the towers are children of, and an array called towerArray, which the towers get pushed to when they are created.I tried clearing towerHolder, then running the sortOn() function on the array, and then adding each tower back to the towerHolder, but the towers just seem to be randomly placing themselves irrelevent to their height.Here's my code for the relevant parts:
Actionscript Code:
function clearTowers():void { while (towerHolder.numChildren > 0) { towerHolder.removeChildAt(0); }}function orderTowers():void { clearTowers();
[code]....
have a twodimensional array that consists of 6 other arrays(like array[0 to 5][0 to 4]). The [4] of each sub-array is a indexnumber that i'd like to use for sorting the array[0][x] toarray[5][x] according to their array[x][4]-value. How would I do
View 3 Replieswould anyone beable to help with sorting out an XML file, what I have is a tooltip that loads in via XML and exported from flash. the XML loads in 2 text fields, field and field2. what I am trying to do is add a button also to the tooltip so that you can click and go to a url. this is what I have in my XML file;
[Code]...
How would I do to sort this array by the largest sum and not just the first number?
var myArray:Array = new Array(100, 200, 9);
myArray.sort(Array.DESCENDING)
//puts out (9, 200, 100)
How would I do to get it (200, 100, 9)?
I have a datagrid that uses a custom cellrenderer class to allow me to use a combobox. I have an invisible column that holds the value returned by the cellrenderer when the combobox value is changed. BUT sorting is wonky. Since what really lives in the combobox column individual cells is an object, it never really sorts properly. Is there a way to fire a sorting event to the column that holds the real value?
View 4 RepliesI have a vector of Objects. Each object has two properties - a country and a person's name.
I'd like to sort & count the number of people from whatever country they are from...
i.e.
20 USA
18 France
16 England
I've found articles online that deal with sorting, but I'd like to be able to count the objects' "country" properties dynamically because they aren't known beforehand (I don't want to loop through every country).
With flash builder and away3d I have made a 3D building where you can walk through.
When you start, you are outside the building and you can enter the building through a door. This building has an outside wall made of bricks and an inside wall. There is a little space between the inside wall and the outside wall (just as a cavity wall).
But when I walk outside the building, I can see sometimes parts of the inside wall through the outside wall (depth sorting problem). The same as I walk into the building, I see parts of the outside wall through the inside wall. Some of these depth sorting problems you can solve with pushfront and pushback, but not all. For example when you are outside the building, you can use pushfront for the outside wall.
You don't see the inside wall through the outside wall anymore. But when you walk into the building you see the outside wall through the inside wall (of course because you used pushfront for the outside wall). Actually it depends on your position in the 3D space for which wall you have to use pushback or pushfront. Is there a way to solve this kind of depth sorting problems?