ActionScript 3.0 :: Loader Loads The Image And After Dont Come Up Again Every?time?

Jan 18, 2009

i just setup this loader i found on the net:

Code:
var l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loop);
l.contentLoaderInfo.addEventListener(Event.COMPLETE, done);[code]....

what i dont understand is that everytime i click the refresh page the loader shows up again(this time loading the image faster) but if the image is already in cache the loader should not show at all (?),i would like to achieve a loader that loads the image and after dont come up again everytime.

View 3 Replies


Similar Posts:


Flash CS4 Loader Class: Image Loads Initially But Error Returned When Loading New Image

Mar 22, 2011

[code]This script is for a loader image gallery in flash, as part of a class assignment. What happens is that in flash, when I open the swf file, the initial image (images/nair_evanescentautumn.png) will load fine. However, clicking on any thumbnail image (including the exact same images/nair_evanescentautumn.png), will result in an error saying the file cannot be found.I cannot figure out why it is doing this... I've tested it over. Clicking each thumbnail does go to the correct position in the two separate functions. All said full-size image links are in the folder images/, and replacing the initial loader image will load the other images in place of the default one. However, clicking on any thumbnail still results in URL not found, even though everything works correctly.[code]Before anyone asks why I'm putting this kind of content into a flash site, I'm not--this is only for a class assignment. I'm just trying to figure out why my images aren't loading right when I'm only doing the exact same thing in the functions as I am on the other pages.Of note, commissions.swf has the exact same feature, just with swf files loaded instead, and it works perfectly fine. home, traditional, digital, and photography all have the image gallery, and all have the same issue (I only referenced one page because if I can fix one page I should be able to fix all of them).As for the artworks, they are all my fiance's. The website design was built for her, and I used the website design for this project because I didn't want to have to build an entirely new interface design. Since the project also required a gallery, I felt that this interface would work just fine.

View 3 Replies

ActionScript 3.0 :: Loader Loads Random Image?

Aug 1, 2010

Is it possible to get a loader to load and display a random image?My background images are quite large so I would prefer to use a loader to keep the file size down but I'm struggling to work out how to randomise the images.

View 2 Replies

ActionScript 2.0 :: Loader Component - Loads The Image For IE But It Doesn't For FireFox

Nov 3, 2006

I have my swf (embedded in a JSP page) deployed in Sun Application Server. My swf contains a Loader component which loads image through accessing the url of my servlet. This servlet of mine returns an image. Now, when i try it inside our network, it works both for IE and FireFox. But when i try it on an external network, the Loader loads the image for IE but it doesn't for FireFox. I'm doubting it is an acess problem since it works in IE.

View 4 Replies

ActionScript 2.0 :: Make An Image Gallery That Loads 3 Photos At A Time?

Jan 1, 2006

I'm trying to make an image gallery that loads 3 photos at a time (look at .SWF). I have also built a function that resizes the photos to fit into its respective box once they're loaded (a maximum of 120x120 pixels). The images aren't getting resized, and they aren't getting re-loaded after the "forward" button is pressed the second (,third,fourth,etc...) time.

View 13 Replies

ActionScript 3.0 :: Loader Or Loader Context - Container Loads The Module From An Absolute Path

Jan 23, 2009

I have two swf files, each one almost with the same classes, the most important one is a Singleton class, each swf does "singleton.getInstance()". The diference is that one swf is like a container and the other one is like a module. So when the container loads the module from an absolute path like loader.load("file://c:/modules/module.swf") or loader.load("[URL]"), two different singletons (same class) are created

But when the container loads from a relative path like loader.load("module.swf") , just one singleton is created (that is what I want) I am just intrigued with this behavior, could someone explain me this? PD: I believe is something related to loaderContext and applicationDomain but It also appears that isn't working right. -Patricio Foieri , Vertigo Labs

View 1 Replies

ActionScript 3.0 :: When Loader.swf Loads The RSL And The Other 10 Swfs The Loader Throws Errors?

Aug 12, 2009

i have a main loader swf file called loader.swf and it loads an RSL.swf (runtime shared library for my swf files) and then 10 swf files, each one to a container (fE.: movieclip '01' in loader.swf, then movieclip '02' and so on). the 10 swf files have a lot of references to RSL.swf, and i have to use RSL.the problem is when loader.swf loads the RSL and the other 10 swfs the loader throws errors like this:

Code:
*** Security Sandbox Violation ***[code]...

then i put in EVERY swf files (loader,RSL and the other 10) the code Security.allowDomain ("*") but throws the same errors...

View 1 Replies

ActionScript 3.0 :: Image Viewer And Im Loading An Image To A Loader And Then Add The Loader To The Stage?

Aug 12, 2009

im working on an image viewer and im loading an image to a loader and then add the loader to the stage.I want the user to be able to drag and drop the image but since it's a loader i dont know how to do it.
I tried

imageLoader.startDrag = true;
imageLoader.content.startDrag = true;
 
but im getting an error on both.

View 2 Replies

Have An Animated Logo Swf File That Loads And Runs Once On The Home Page Every Time The Page Loads?

Jun 25, 2009

I have an animated logo swf file that loads and runs once on the home page every time the page loads. The logo has been updated to appear in three different colour schemes. I want one scheme to load and when the page is refreshed or revisited, one of the other colour schemes to load in its place. They can appear in any random order, just a different one to the one that played before reloading.Can someone point me to an answer or tell me how to do it? I have found a way in JavaScript but this only works on plain images, not swf files.

View 6 Replies

ActionScript 3.0 :: Pre-loader Loads 80% Of File Before Loading Itself?

Nov 22, 2010

The SWF loads itself almost entirely before even displaying Frame 1 (the pre-loader). Said pre-loader exists in it's own scene; when this scene is exported on it's own, the file size is 1.6 megs (the full export of all scenes is 1.9 megs). There is VERY little content in the preloader, in fact, a blank first scene exported on it's own is ALSO 1.6 megs. There is, however, a lot of content throughout the rest of the file (music, graphics, font, all embedded at the request of a client).It looks sort of like it's trying to ensure that some arbitrary amount of the resources are present before the first frame loads.

I used to be deep into Flash way back in the CS3 days, but haven't touched it since; the result is I am fairly familiar with AS3 but CS5's new features (many of which seem to replace entirely code-oriented methods with point and click methods) often times make me scratch my head, so you'll have to forgive me if this is the sort of 'five times a week question' y'all are numb to by this point.but I'm still not entirely sure.I've already scraped every last little bit of that awful TLF text stuff from the project, and I've fiddled with the action script settings but haven't had any luck.I'm not exactly sure what code to post here, as little of it seems relevant (after all, the problem appears to be happening before anything I've written runs). Please, though, if there's anything I can do to make this more clear, I'm totally willing to oblige.

View 3 Replies

UI Loader That Loads Pictures From A Drop Down Selection?

Nov 24, 2009

I have a UI loader that loads pictures from a drop down selection. I would like the data to be cached after it is loaded, but it doesn't seem to be doing this. Every time someone selects something different in the drop down, the image reloads.

View 1 Replies

ActionScript 3.0 :: Flash Component Loads Before Loader?

Dec 3, 2010

I have a preloader in the first frame of my movie but when i test it, it takes awhile before anything shows up because the components that i am using in the movie all seem to be added in the first frame even though the actual component is in another frame. Is there any way to get around this?

View 1 Replies

ActionScript 3.0 :: Loader Loads A Blank White Space

Jun 30, 2009

What I'm trying to do is using a loader to load some videos. If the video is not found, I just want to display a white space in the loader. [code]...

View 3 Replies

ActionScript 3.0 :: Maximum Concurrent Loader.load() Loads?

Oct 16, 2008

I have a class that loads a list of images in an XML file. The XML file can potentially contain any number of image URLs.Would it be advised to call Loader.load() in a for each loop, causing every image to be loaded concurrently? Will there be a point at which the number of concurrent loads is too much for the system or the bandwidth, or does flash have some sort of intrinsic load management?

View 6 Replies

ActionScript 3.0 :: Content Loader Loads The Files In Wrong Order

Feb 28, 2010

I am using a content loader through AS3 to load some images and then later pushed into an array. I have pushed my image file paths in to an array (arrayImages). But when the loader loads the images it doesn't load the images based on the order they are listed in the arrayImages, instead they were loaded based on their file sizes. Is there anyway that these can be loaded in the order they were pushed to the array? Below is the code that i use to load the images.

function funcLoadImages() {
for (var i:uint=0; i<arrayImages.length; i++) {
var ldrImageLoader:Loader=new Loader();
ldrImageLoader.load(new URLRequest(arrayImages[i]));ldrImageLoader.contentLoaderInfo.addEventListener( Event.COMPLETE,pushLoadedImagetoAnotherArray);
}
}

View 6 Replies

ActionScript 3.0 :: Rapid Clicking Makes The Loader Loads The Wrong Picture?

Jan 14, 2012

why rapid clicking (moving to another part of the gallery) makes the loader loads the wrong picture?

Here is a simple example:

Code:
var req:URLRequest=new URLRequest("gallery.xml");
var xmlLoader:URLLoader=new URLLoader(req);
xmlLoader.addEventListener(Event.COMPLETE, xmlComplete);

[Code].....

View 4 Replies

ActionScript 2.0 :: Loading Images OnClipEvent(load) - First Image Has To Cycle Through Before The Second Image Loads

Aug 17, 2009

I developing a site where on the homepage, there are about 6 images that rotate, but if you click on a sub link, a different image loads. But the problem is that, the first image has to cycle through before the second image loads. I want the second image to load immediately.

[Code]....

View 1 Replies

Actionscript 3 :: Facebook API - Can't Retrieve Image From Event Object After Image Loads?

Mar 13, 2012

I am getting a mysterious result when trying to load profile images from a logged in Facebook user's friends list into an as3 canvas app. In pretty much every (non-facebook) application I've made where loading an image is required I use the following:

private function loadPic():void
{
var url:String = Facebook.getImageUrl(_friendslistObjectArray[_loadCount].id);
_picLoader = new Loader();[code]............

I can't retrieve the image from the event object,and I am given no error at all.It all just fails silently.If I remove the line var image = evt.target.content, the process runs through the whole array.I can't think of any reason this would occur. Furthermore, if I look in firebug's net activity, I see I see the images get loaded as long as I do not have the line I just mentioned included. I just can't seem to get the image data from the event object to add it to stage or a container movieclip.

View 1 Replies

Flex :: Set An Event Listener For Mx:image To Kick In After Image Loads?

Sep 27, 2010

Is there a way to dispatch an event after Flex loads an mx:image? I'm loading image externally and don't know the width/height until it's loaded. I get an exception when I call width/height to the image before loading.

View 2 Replies

IDE :: Video Plays Every Time A Page Loads?

Mar 16, 2010

How can I play an embedded flv video automatically in a Flash website every time it loads a page?

For example: When I click on the "About" button, I'll go to the About page. On that page, there's an embedded flv that I want to play automatically every time I go to the "About" page.

View 1 Replies

ActionScript 3.0 :: Select A Tab At The Top Of The Screen And A New Page For Time Line Loads?

Mar 16, 2011

link buttons to a new frame? Similar to this example here so a user can select a tab at the top of the screen and a new page for your time line loads.I know basics of Flash but not sure how to achieve this.I cant attach the file here as its too big .

View 3 Replies

Actionscript 3.0 :: Loads And Displays A Random Photograph Each Time Someone Visits It

Jun 1, 2009

I'm trying to make a website which loads and displays a random photograph each time someone visits it. I already know how to preload a photo but in this case the photos are quite big, so I want to preload the RANDOM photo with the site at the beginning of the site loading process. A very simplistic approach is to make 20 or something versions of the site, each with a different photo but this would be very, er... simplistic. I usually have a site.swf, a preloader.swf which loads the site, and I use no frames in my site.swf.

View 7 Replies

Flash - Add Image Using Loader And Make Image A Button With Event Handler?

Oct 26, 2011

How would I make an image I load using AS3's loader class into a button with an event handler on it? Below is what I have started. And below that is my error I get when I click the message.

AS:

//call function that starts loading my image
callButtons();
function callButtons():void {

[code]....

the error I am getting when I click the spanish.png on the stage is: ArgumentError: Error #1063: Argument count mismatch on MyVideoPlayer_CS4_fla::MainTimeline/playSpanish(). Expected 0, got 1.I NEEDED TO ADDED evt:MouseEvent

View 1 Replies

ActionScript 2.0 :: Image Loader Gallery - Put A Timer - Divert To The Next Image Automatically

Apr 30, 2010

I have this piece of code to change images. I was trying to figure out how you could put a timer on the code, so if the image has been displayed for say 5 seconds it diverts to the next image automatically? Also if it's not to hard, when it has played to the end to divert to the 1st image.

[Code]...

View 1 Replies

ActionScript 2.0 :: External Text Which Loads And Displays Normally Only When That Frame Is Loaded For First Time

Dec 28, 2006

i've got a problem. i have an external text which loads and displays normally only when that frame is loaded for first time. i'm using getDate because it changes every day. it's peculiar because all of other texts which are external also,always load just fine (first time and every time when return to previously visited frame).

View 6 Replies

ActionScript 2.0 :: SendAndLoad Fails To Load First Time And It Loads When I Call The Reload Function?

Aug 2, 2010

It doesn't load during the first load.

myVars= new LoadVars();
myVars.onLoad = function(works)
{
if(works){

[code].....

I am tryin to hit a servlet to get the data.

View 1 Replies

Flex :: Adding Loader Image While The Image Is Loading?

Feb 23, 2010

I need to create a gallery to load images and display them. This part is fine:

/**
* @variable image_name to store the name of the selected item
*/
private function showimage(evt:Event):void

[Code].....

where imgMain is the id the image component.

But, I need a small twist. A transition image i.e. loading image should be displayed while the the image is being loaded.

View 1 Replies

ActionScript 3.0 :: URL Loader Fails Every Time

Apr 30, 2010

I've tried numerous times to get the URLLoader to work properly, but it never does. I don't know if it's a problem with my code or something wrong elsewhere. AS3 Code (pastebin) It's talking to my PHP ...here... which returns valid XML. No matter what I do, I get nothing but: Error #2032: Stream Error. URL:[URL]

View 2 Replies

ActionScript 3.0 :: Reflection Image Should Appear Under The Image / Loader

Mar 6, 2010

I've looked through a couple threads here about reflecting images... but I don't quite understand it. I will include a link to my project thus far: Final Project First of all, ignore the music/mp3 items at the bottom of the stage. Those aren't wired up yet. When you click on a bike image on the right, the reflection image should appear under the image... but it's not quite working out that way, and I've tried a few things. Here's the segment of AS3 code that is giving me trouble:

[Code]....

View 2 Replies

Professional :: Preload - Loader Stops At 0% And After Same Time It Goes To 100%?

May 4, 2010

I have a main movie (e.g called main.swf) and a couple of other movies which need to be loaded inside my main movie.Some of these should load inside a movieclip, and some should load inside a scrollpane. Now, whatever I do, i just can't make my Preloader show the amount of loaded movies properly.I even used the built in methods of scrollpane but it doesn't work at all.I use AS2, and flash CS3.The loader stops at 0% and after same time it goes to 100%.

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved