how to make the gallery/pictures stop scrolling 20 or 30px to the right of the webbrowser. I think something has to be added in the end of the code under IMAGES DRAGGING FUNCTION.
This is the page: [URL]
Heres the code for the scroller:
//FUNCTION UPDATE IMAGES SCROLL WHILE PRELOADING
function updateScroll() {
//SCROLL ACTIVE OR NOT
[Code].....
I am making an xml driven gallery, with scrolling thumbnails that sit along side of the main image, in a column. These thumbnails scroll depending on the mouses Y position over the column that they sit in. If the mouses position is below the halfway point of the column, the thumbs scroll down, and then if you go above the halfway point the begin to scroll upwards they scroll up until you reach the top image, and it stops...
However, my problem is that when the thumbs have scrolled to the bottom image in the column, unlike when it reaches the top, the scrolling function doesnt stop, it just keeps going until the thumbs have completely scrolled out of shot. What I would like to do is make sure that, the scrolling function stops when it reaches the bottom image; the same as how it stops when it reaches the top...
So if the bottom image rises above the bottom of the column that holds the thumbnails, the thumbs stop scrolling, and will only be able to scroll upwards. Here is the code for the scrolling function that I have:
ActionScript Code:
thumbContainer.addEventListener(Event.ENTER_FRAME, scrollThumbs);
private function scrollThumbs(e:Event):void {
if (thumbContainerMask.hitTestPoint(stage.mouseX, stage.mouseY, false)) {
[Code] .....
I am attempting to make a small gallery of pictures that slide in from the right when i press the relevent button - which functions perfectly as it stands, here's the code structure on the main timelines 'actions' layer, but1, but2 etc are actual buttons and not MC's:
[Code]...
I'm having two problems. First of all, the gallery loads all pictures at once. The more pictures in the XML file, the slower they all load. Secondly, I wanted the pictures to scroll in its _y coordinate, similar to Sugar Rhyme's website portfolio (see url]...).
View 1 Replieswhat is the AS for making some text and pictures scroll in with the same scrollbar. is there a component in mx that i could use?
View 1 RepliesIm making a scrollable mc. Easiest thing in the world.... but the damn scoller just will not stop when the movie clip it's scrolling ends. It stops....eventully... but not close enough. What actionscript do I need to use and where do I put it?
View 1 RepliesI'm trying to get this effect [URL] but, instead of scrolling through pictures from an xml I want it to load one movieclip from the library and pan in and out as shown in the demo.
ActionScript Code:
var xmlURL:URLRequest = new URLRequest("images.xml");
var xmlLoader:URLLoader = new URLLoader();
var xml:XML;
//Declares the image array
var imageArray:Array = new Array();
[Code] .....
I tried to modify this so it would work to my standards, but it doesn't... I don't even get any errors.
My AS3 project is devided in to 4 sections.
1.) load XML file directed from php site and store all data to miltidimensional array
2.) load mc from library to stage and scroll it with mouse move
3.) load pictures into previous scrolling mc on calculated coordinates
4.) add event listener to every loaded pic to open new site
here is part of code that's bugging me:
Code:
var polica_mc:libMc = new libMc;
var container_mc:MovieClip;
if (xmlLoaded == true) {
[Code].....
Problem is that pictures are not loaded into polica_mc (scrolling mc) but outside.
Is it possible to put pictures and buttons and links in a scroll box right alongside the scrolling text?
View 1 RepliesI recently decided I was going to feel my way through Flash and learn it on my own, so here I am. But I need some assistance. I am modifying this tutorial for my needs, but unfortunately the dimensions of the pictures I am using aren't the same as the ones here. I thought the code would still function the same way, but alas.. no. Anyway, is there any way to 'universalize' the code or could someone explain which attributes I would have to alter to fit different image dimensions?
View 0 RepliesI want a xml gallery with all the pictures visible and stacked on top eachother. And i also want to make every picture buttons s you can click on a picture and go to the html page with a big picture. is this possible and can someone help me with the code?
View 1 RepliesThe photos in my xml photogallery swf work fine. However, when I load the xml photogallery swf into my index swf, the pictures stop loading after picture 1
Code:
import flash.events.MouseEvent;
function loadXML(loaded) {
[code].....
this is the first time I'm actully utlizing XML with a pix gallery. I exeprience problems when surfing the gallery in a browser, however, not when I'm just executing the swf file. The problem is that some of the pictures are not displayed correctly.
View 8 RepliesI'm running through the tutorial on this photo gallery, but I would like to modify the code some. Instead of loading the first picture in the XML array, I'd like to have it randomly load one of the pictures. Below is the code that loads the first movie:
Code:
function firstImage() {
if (loaded == filesize) {
picture._alpha = 0; picture.loadMovie(image[0], 1);}}
I don't know much, but I'm thinking there should be some variant of "math.random" around the
"loadMovie(image[0],1);"....
I was taking a look at this great site at the link interior Design. How it's done that gallery? I noticed that the pictures are loaded in order, before they are asked to be shown. When the user clicks on the number of the image, it has already been loaded by the swf.
View 5 RepliesI am making a site with a scrolling photo gallery. The site is located at [URL]I have a scrolling thumbnail gallery that is perfect for me. I am happy with it with one exception. I used the loadmovie function to make it and for some reason it takes a long time on slower internet for the movie to initially load. What i would like to do is have the movie open up fairly fast and the individual pictures can load once they are clicked. I want to use xml however i don't know how to do it.
I would like to keep the same setup on my photo page but i want to use xml because i think it would be better on loading. I am interested in this type of gallery. [URL] I found this online and put it on my server. I love this gallery I just want these effects and xml layout in my gallery. I dont even have to have the cool fade effects i just need the site to load faster and the pictures to load individually.
how to unload my already populated xml gallery,before loading new content here the functions i want :
following 2 functions will be called by a button :
removes previously placed objects
function clearLoadedPictures():void {[code]....
I'm doing my daily homework at Flashkit, in order to see how other people do certain thint was just the other day when I downloaded the "Fade script image gallery" by Ben Durman, when I stepped into an unsusual? behaviour that I can't get to understand.It's very simple, in the gallery there are 10 pictures. Everytime you click in one number, the previous image fades out and the new image fades in. The AS code is very simple and easy to understand. However, why I can't possibly understand is that when I create a new layer with another image, the whole movie starts to statter, transitions are not smooth any longer and some transitions are not even properly executed. The more layers/pictures I add, the worse it all gets (15 pics is almost impossible to handle)Part of the original code which makes transition between pictures happen is this:
[AS]
onClipEvent (enterFrame) {
// find alpha of new pic
[code].....
[URL]
Basically i want to have Album categories the same way the thumbnails work so their is a mask limiting 4 categories on screen and when you click < or > arrows next to the categories it shows the next 4 categories that you would be able to choose from.
Then I would want it to load whatever category you selected into the thumbnails and the larger pic.
Does anyone know how to do this ? Or if their is another tutorial that would show me how to add categories into something like a gallery with thumbnails?
Apologies for being stupid and the poor grammar I've been searching everywhere to find out how i can add in some categories and still have it linked to the thumbnail scroller and larger images, but i haven't found any luck at all I just want it so you could add in as many thumbs and categories as you wanted and have those masked and scrollable rather then a dropdown.
I paid for some silly pdfs to explain it better to me but they did it in a way that I didn't like and turned out just to be a waste of money. Learnt my lesson and signed up here to ask the pros! I want to create something that can be updated from just an xml file.
[URL]. It's a tutorial that shows how to create a photo gallery and load the pictures and comments via XML. My problem is the following, the gallery and everything works well, but I when I try to load it into a container then everything messes up. Here's what I have: I have a main movie (the main .swf file) with a container in it, when clicking on one of the buttons from that movie the gallery.swf loads into the container (the gallery is the exact gallery from the tutorial) and it works well, until I press the button to load it again.
It seems that it messes up the value of "p". I tried tracking it, on the first load it tracks normally p=1, 2, 3, 4.... but on the second load it reacts as if it's double tracking it p=0 1, 2 2, 3 3, 2 4 ... It seems that Flash somehow keeps the old value of "p" in mind. I tried reseting it somehow or something but I can't seem to make it work (or maybe I have to rebuild the whole thing?).
It works perfectly if I load it only once but if I load the gallery.swf twice or more times then it goes crazy (or since I have more buttons on the stage, after pressing one and coming back to the gallery, it does the same, it's messed up). How can I "reset" the value of 0 on every load or something? I even tried playing around with unloadMovie but can't figure out how to use it.
A couple days I started a topic about how to load a folder of pictures into a flash movie(photo gallery).
With some tutorials I almost got it but something is not working very good.The images are displayed to big. They apear out of the box they should be in.
I dont know where to look anymore... is there someone that can take a look at my files?
I will attach them in a .zip file. (the "img" map is empty because the file was to big)
I want to say that the code I am working with is the same found here: [URL] The code is working perfectly (pictures are displaying) when opening the file, work_diesel.swf by itself. However, my problems occur when I open default.swf, and then navigating to the section work. From there I hit advertising, and in that section DIESEL. HERE is where the problem is visible. The pictures are not loading AT ALL when doing it this way (the correct and final way).
I am just wondering if anyone can pin point the problem for me so I can change it. It must be said that the work_diesel.swf is loading from an external source into default.swf.
im fairly new to actionscript 3 and i am trying to make a xml photo gallery for my father. It's nowhere near done but I am trying to load the pictures from xml and i keep getting this error
[Code]...
What I want to do is to make a gallery based on the tutorial gallery here (thumbs), but I want the user to be able to choose different galleries from within the movie. I figured that I could make a loop to cycle through the galleries, then nest another loop inside it to cycle through the pics, captions and thumbs. While I wrote, I constantly tested the output with trace commands, but when I tried nesting the loop I lost all output.. I'm pretty new to both Flash and Actionscript, so if theres an obvious solution I havent been able to see it.. This is my temp XML file:
[Code]...
i was looking for gallery looking like this site [URL] i was looking gallery first page title gallery then Big image like this with description.
View 1 RepliesI'm fairly new to AS3 and I'm trying to make a pretty complicated (for me) set of behaviors. You can see what I'm trying to do here: [URL]. The Main class sets up the crosshair, the navigation, the color bars that randomly roam the stage, and the 3 words that float around. The idea is that when you hover over a word, the color bars split apart like a curtain and two random pictures appear. Then, when you roll off the word, the pictures disappear and the color bars start roaming again.
I've got the color bars, the floating words, and the curtain split working great. My problem is bringing in the pictures. For whatever reason, 60 to 70% of the time the tween stops before it is complete. I think it has something to do with the fact that I've got a hover on a piece of text, and the mouse sometimes slips into the empty spaces between the letters, but even when I put a semi-transparent rectangle over the whole word to act as a hit area I got the same results. The ZIP with all my classes is here: [URL]. Again, I'm new to AS3 and OOP,
So I've found many people trying to do this[URL].. but with actionscript 3.0 and not 2.0.
I'm not a coder by any means, but I've kinda translated most of it except for the scrolling part.
This is what I have so far:
[Code]...
as you can see, some of it is hidden as I was afraid to delete things I might end up needing later. The position of the gallery is at an exact place, and the xml file is perfect. The only problem I'm having is with the scrolling part. I keep getting an error in the function scrolling code that says that a property of mask_mc is being called wrong. I also have learned that the createEmptyMovieClip is not as3 but as2, and that that is also wrong. I'm just trying to get the scroller to work.
I want to incorporate a Horizontal thumbnail Scrolling Gallery to showcase the Special Menus of the concerned hotel. and on click of each image there should be a small popup to display other information of the menu. All this should be XML driven.
View 1 RepliesI have created an image thumbnails MovieClip, that has bunch of thumbnails in it.Problem is that there is no scrolling in it. I cant specify any width or height of the movie clip to limit it.I think I have to use Mask, but not sure how or even if it is the right approach.All I need to do is for the thumbnail_container to scroll if the number of images are more then stage can show.
View 0 RepliesI'm developing my portfolio and want to add a horizontal scrolling dynamic gallery (see files). In order to achieve this I combined Lee Brimelow's tutorial on a horizontal scrolling gallery with a tutorial onhow to load images dynamically into a gallery. So far so good... It all seems to work except for the fact that the gallery has to detect the number of images in the scroller and adjust it's width accordingly (which it doesn't do yet). Also it has to make sure it doesn't scroll out of the containing MC (you'll see what I mean when you open the files; it also doesn't do that just yet).
View 1 Replies
