I am making something like a slot machine and the main number (a movieclip placed in separate layer) moves vertically continuously.I made a button and how do I make the main number movie clip stop moving after pressing the button?Our office has Flash CS3 and all the actionscripts are manually written.
View 1 RepliesI have two buttons in my movie that move a movie clip up and down on my stage. the code in the buttons atm is as follows,
on (press){
if (this.pics1._y<-240) {
} else {
this.pics1._y = (this.pics1._y-10);
}
(this is just the down button)This just checks to see if the movie clip has reached its lowest position and if it hasn't it movies it down by 10px.What i would like to do it make is so when the button is clicked and held the movie clip moves down untill the button is released.(Im using Flash 8 with Actionscript 2)
I have a movie clip that loads and when it is done playing it has a close button that unloads the movie clip... I want to add code to this button that moves the play head to frame 20 of my main timline using actionScript 3.0
View 10 RepliesI have a feeling this is a very simple thing to do, but I just can't seem to find an answer by simply googling it.
I have no other actionscript in this whole .fla file except a stop();
I have a button, inside the button I have a movie clip at the OVER location.
That movie clip simply plays 10 frames, and at the last frame I set the action stop();
All I want it to do is stop these 10 frames from looping, while the scene keeps doing what it does. Instead, as soon as the 10th frame inside that movie clip plays, it stops the whole scene.
I had a button in scene and it worked perfectly.Then I put it in the movie clip, so it appeared only when mouse was over other button and then it stopped working.This is the code:
on(release){
mx.behaviors.DepthControl.bringToFront(_root.poloz enie_movie);
_root.polozenie_movie.gotoAndPlay(2);
}
Button should start a movie clip different than it is itself.
I'm using a movie clip as a button to show content on a page, effectively its like a new page of the website. Problem is, with the script im using for it, once the content is show, the button is still active and if clicked again, will re-load the content. I want a way to effectively disable the button whist the content is shown.
this.services_inner.buttonMode = true;
this.services_inner.addEventListener(MouseEvent.MOUSE_OVER, rollOver_services);
this.services_inner.addEventListener(MouseEvent.CLICK, onClick_services);
[code]........
i'm trying to write the code for a flash animation which uses different movie clips and buttons.all the movie clips are in the same layer but i've written code to make all but one invisible when the animation loads.
dance._visible = false;
harmonica._visible = false;
violin._visible = false;
i've then got buttons which are supposed to make the movie clips visible, but then disapear again after the clip has played.i want to be able to press one button to have one clip start playing, but then i want to be able to press another button which stops that movie clip and starts a new one playing.this is what i came up with but it doesn't work
on (press) {
violin.stop();
harmonica.stop();[code]....
this script is from one of the buttons which is supposed to start the movieclip harmonica and stop violin playing.i've got the same code for violin but the other way round.when i press a button it works fine and plays the clip which then disapears (leaving a default clip which plays all the time visible) but pressing buttons to interrupt the clip and play another one don't work properly. the movie clips don't stop and reset when they are interupted. they kind of pause instead. when i go to play a clip that has previously been interrupted it starts from where it has been paused and not from the beginning
I have two arrows that control an animated movie clip that has words scrolling vertically. When you click on one arrow it plays the movieclip forward, and when you click on the other arrow it plays the movieclip backward. I want you to have to keep clicking on the forward arrow to have it continue animating through the different words. I've place stop actions at the points I want the movieclip to stop animating but when you click the forward or backword button it never stops and just plays through the whole thing. [URL]
View 6 Repliesi am doing a simple project in which i have 2 frames in the main time line and a movieclip in the first frame and a button.i have something else in the second frame.when i click the button the movieclip should start after it ends the timeline should move to second frame and stop.
View 7 RepliesI would like to create an image sliding effect using next and previous buttons. For example the sliding images on the homepage here: http:[url]....I know this is not in flash, but that's the effect I'm trying to create using flash.
I followed the help quoted below. However, when I press the Previous button to rewind the timeline, the movie clip does not stop. For example, if I am on image 3 in the slider and press the previous button...instead of going to image 2, it slides all the way back to image 1 without stopping.
Quote:
ActionScript 2:Notice how, in the link to the example, all of the images/slides are the same size. Create a few of those before you begin.
1. Convert each image/slide to it's own Movie Clip, so that you can go always go back and adjust them if needed....as well as other useful reasons.
2. You only need 2 layers for now, Actions & Container. On frame1, add a stop action to the frame on your actions layer. Then, place all of your Movie Clips on the stage, on the Container layer. Line them up horizontally, edge-to-edge. Select them all and convert to a Movie Clip named "container".
3. On the Container layer, Insert A Keyframe > move the Container Movie Clip to the left so that the next slide is now in place on the stage > Right click in between the two Keyframes and choose "Create Motion Tween". You should have the animation from slide 1 to slide 2 now. Repeat this process for 2 -3, 3-4, 4-5 ......(don't worry about the reverse!)
4. We need to create buttons to go to the next and previous slide. Make a new layer called Buttons. Create 2 buttons, one for Next and one for Previous. These can be Movie Clips OR Buttons, just place them on the stage give one an instance name of "next_btn" & "prev_btn" (no quotes) for the other.
5. All that's left is to add some actions to a few frames on the Actions layer.
a) Add a stop action to every frame where the slide will be static (still), you should already have one on the first frame from step 2.
b) Now here's where the magic happens. If we test the movie now, the slides will just play and over. So add this code to the frame 1 on the Actions layer:
Code:
stop();//already have this stop action, just add the below
this.onEnterFrame = function(){[code]....
I have created a movie clip button but am stuck with the actionscript. I have created the rollover and rollout for this movie clip button but i want it to do 2 things after this i want it to go and stop on the first frame of a movieclip which has my content on it called portfoliogallery_mc (which is also the same instance name for it) when you then click the button i want it to go and play frame 11 of that movie clip portfolio gallery_mc. Here is my current actionscript i HAVE Flash 8 on my comp that i am currently using. Please note my actions are on a layer called actions and not on the movieclip button itself. nxtimagetwo_mc (is the movie clip button/instance of mc)
[Code]...
I have some simple script that has 2 "movie clips". What I want to do is to start moving the second movie clip at the same time when the 1st starts moving. (both start moving at the same time) I tried the following script but it never works:
[Code]...
it isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 Repliesi'm kinda new to actionscript but im trying to find out how to realise a banner i am making.I have 1 big movieclip thats about 5x larger then what is shown, i have 4 movieclips each on each side of the movieclip, left, right, up and down.The idea is that when i hover on 1 of the movieclips the big movie clip moves that way until the mouse isn't hovering above it or when the movieclip reaches the end of the side.I have given a mouse listener event to each movieclip on the side, the trace works well, but i i don't know how to make the big movieclip move when i hover the side, i hope someone can give me some pointers on how to proceed.
Code:
stop();
import flash.events.MouseEvent;
leftMove.addEventListener(MouseEvent.MOUSE_OVER,move_left);
function move_left(event_object:MouseEvent) {
[code]....
I am importing a movie clip as a symbol from a SWF using Embed to a AS3 program and, after attaching the movie clip to the stage, the movie clip keeps repeating. Before you ask I have indeed creating a script layer and put a "stop()" on the last frame. In fact the swf containing the symbol works perfectly fine when executed on its own or in Flashdevelop (my choosen IDE). Its only when imported does the clip keep repeating.Here is the code:
Code:
package {
import flash.display.*;
[code]......
l just following the lesson on kirupa's Classes and Movie Clips for AS3 [URL]im trying rewrite the for loop from time line to class the problem is instead all the circle moving individually, they moving together. Here is the class.
package {
import flash.display.*;
import flash.events.*;
public class Main extends MovieClip {
[code]...
I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
I have an image that's being moved like so:
Code:
mcSky.addEventListener(Event.ENTER_FRAME, moveSky);
function moveSky(evt:Event):void {
[code].....
I have a movie clip on my stage which I want to move up 2 seconds into the movie, as if it is popping out of an invisible box. I can do it on the timeline, but wondered if anyone knows how to do it using as2?
View 1 RepliesI have a 10 frame movie clip which is stopped at one, i want it to play from frame 5 at a given moment. ive done _root.ball.gotoAndPlay(5); but this doesnt seem to work.
View 2 RepliesI have a movie clip that needs to move to a location when a button is pressed. I need the movement to be animated rather then just jump to the location. I think it would have something to do with affecting the movieclips _x and _y but i can't figure out how to make it animated.
View 6 RepliesI try to move my existing movie clip using keyboard.. I want to clear how i can move mc.. For example if i click errows.. or for example if i click N i must move mc to right position. But i can not clear why my arrows working and N not
Code:
stage.addEventListener(KeyboardEvent.KEY_DOWN, starMoving);
function starMoving(event:KeyboardEvent):void
{
switch (event.keyCode)
[Code].....
after a certain amount of time I want a moving object to "swap" with another movie clip, so far I have this.
ActionScript Code:
attachMovie("cannonball2","cannonball2",_root.getNextHighestDepth(),{_x:this._x, _y:this._y});
[code].....
I'm trying make a jumping animation move to the left when I click the left arrow key and up arrow key and don't know how. I'm new to AS, just sorta winging it.
[Code]...
I want to make a movie clip move anywhere outside the stage, but dont really know how should I do it, here is the codeI think that some changes should be made somewhere around math.random, where I put that // ???btw, I got this code from a tutorial where it was about attaching like 50 balls at once, making them move to random locations so there might be some useles things too the point is that I want a ball to be attached somewhere, preferably to the middle of the stage, and I want it to move in random direction with constant speed. I tried many ways of doing it, but the ball was changing direction every frame or other lame things happened
View 1 Repliesim just wondering , this always happens when i create a flash movie,, when 2 MC's runs together at runtime ,, the movie clips moves slowly .
View 1 Replieshow to prevent the mouse from moving over a movie clip, so that the movie clip in a sense has a boarder around it that stops the mouse from entering its area on the main stage.
View 1 RepliesI am using Flash CS4, AS3.I have a movieclip "MC1" and a Component "B1" from the 'Component Library' on my main stage. From code inside of MC1, I would like to create an empty movieclip "MC2". Then, still from code inside of MC1, move(cut and paste-like) B1 into MC2. I have failed in my attempts thus far...
View 2 RepliesI made a movie on the main timeline that involves a couple armature layers. Now I want to put the whole thing into a single movie clip. Flash won't let me, because apparently I can't use the Cut Frames command when armatures are involved.
View 2 RepliesI am trying to move a playing card across the screen from the deck to the players hand. The deck is in a stationary position and each player has 2 card places in front of them which are also stationary. The deck is a movie clip called "deck" and the player cards are named "p1c1" and "p1c2"....(player # card #). The animation I am trying to accomplish is to duplicate the "deck" movie clip and move it to the players card. Once it reaches the players card, the stationary card will load the card image and the duplicated movie clip will be removed to make it appear as a smooth transition.
View 11 Replies