swfObject embed has the following signature,swfobject.embedSWF(swfUrlStr, replaceElemIdStr, widthStr, heightStr, swfVersionStr, xiSwfUrlStr, flashvarsObj, parObj, attObj, callbackFn)with width and heigth required attributes,What can I do to signify dynamic height and width.
View 4 RepliesI am trying to reference to top level (stage) width and height of the main stage for the placement of something located inside a movieclip on the stage.
My code is:
Code:
my_loader.x = (stage.stageWidth - my_loader.width)/2;
my_loader.y = (stage.stageHeight - my_loader.height)/2;
But this seems to just relate to the width/height of the mc that my_loader is nested in...
I have tried the following and had no luck:
stage.stage.stageWidth
root.stage.stageWidth
parent.stage.stageWidth
MovieClip(root).stage.stageWidth
I am developing an animated homepage for a Flash-HTML hybrid website, and for the sake of standards, my solution is proving difficult.
Here is the run-down:
For Flash users, HTML page loads a variable-height AS3 Flash movie that will start at 556 pixels high, and after finishing its animation sequence, tween via Actionscript + JavaScript to 250 pixels high.
To kick off this movie sequence -- (below-left) -- I am attempting to set the initial height of the Flash movie via MooTools, so if users do not have Flash or Javascript enabled, they will see the shorter-height image area with alternative image content and HTML content revealed (below-right).
Element.setStyle sets the height just fine until swfObject runs, at which point the movie collapses since I am not specifying a height via CSS. If users do not have Flash, it defaults to the height of a static image.
So here is my question: Does anyone know how to dynamically pass a height variable to swfobject when it is set up to width/height @ 100%? Am I killing myself for no reason trying to work with two page heights?
Image Sequence: Left - Initial Flash movie with HTML navigation below Right - Resized movie at the end of the sequence with HTML nav & content below, looks the same as no-Flash version (static image)
[Code].....
i want to load external images of different height and width into same height and width.
View 3 Repliesi want to load external images of different height and width into same height and width.
View 0 RepliesIs there a way to set the stage width and height using actionscript, the same way you might set it using the "size" button in the document properties panel?
View 9 RepliesI have two example pages. http:[url]....this displays 100% width and height flash without a problem across all the browsers including IE9.http:[url]....this displays 100% width and height with min-height and min-width without a problem across all the browsers except for the IE9.I need #2 link work with IE9. (fullsized flash with min-height and min-width).
View 1 RepliesI would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 1 RepliesI have mc1 which contains code to dynamically generate multiple textfields based on an xml file, but mc1 has nothing physically on its timeline. I want to make another mc, mc2, where its y location is relative to the height of mc1, but when I trace the height of mc1 it returns 0.
Is there any way to get a height based on however many textfields are dynamically loaded into mc1? The height will naturally be varying so I can't just create a variable for a constant height.
Is it possible to dynamically (not in the project's options) change the dimensions of the stage by using ActionScript 3? I'd want to create a 400x300px loader, but I also want it to load animations that have bigger or smaller dimensions. I would then change the width and height of the loader to make the loaded animations fit well. Is there any way to do that?
View 1 RepliesI am using this script (3.0) to set the text of a dynamic text field...
stop();
my_Btn.addEventListener(MouseEvent.MOUSE_OVER, onMouseover);
function onMouseover(event:MouseEvent):void
[Code].....
How do I set the height and width of the text?
How can i make a dyn textfield with fixed height but variable with width?
ps what is the difference between
Code:
var pageContent:TextField;
vs
var pageContent:TextArea;
I am trying to get my swfobject to register 100% height. I am writing this: Code: swfobject.embedSWF("CoolBox.swf","content","100%","100%","9.0.0",null,null,null);
and it doesn't work. If I replace the height paramater with a static number like 200, it will work. The width paramater works fine at 100%.
I have a full screen flash movie that loads and displays correctly in firefox and chrome. In IE, however, it displays at 1/3 the width. The embedded code is relatively simple:
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
[Code]....
IE respects the height, but I would really like to use 100% height. What could I be doing wrong?
Tested in IE 8, Windows XP, Flash Player 11, SWFObject v2.0
I would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 3 RepliesI am looking at the SimpleButton entirely wrong. Here's what I'm doing (inside of a MovieClip):
[Code]...
the close_btn.width and height remain 0. Am I supposed to just rely on the DisplayObject members of the SimpleButton completely and ignore width/height/x/y or what?
What code can I use to shrink a piece of text in a dynamic text field to fit within a certain height and width.
View 1 RepliesI'm trying to edit an HTML that uses swfobject to load a flash file.
What I'm trying to do is to reduce the size of the SWF file.
I've tried editing the height and width parameter within the swfobject(), but that didn't work.
I tried reducing the width height in the HTML css, but that also didn't work..
How can I pass a 'width' or a 'height' parameter to the swfobject so it will actually load the swf in a smaller or 'zoomed out' way?
I'm loading a flash MovieClip (Test.swf) like below. The problem is I can't read the size of mc (mc.width and mc._width both return 0, for the height as well), but I need to scale it. I have the stage size, I can scale, but I don't have the size of Test.swf, so I can't scale it to fit into the stage... ActionScript2, not actionscript3. If it was 3, I could get the value from the loader, but with as2??? The problem is I don't have control over the swf I load, so I can't put it's dimensions in the first frame...
[Code]...
package
{
import flash.display.*;
[code].....
In the following code Only the button image has been embeded into the flex code. But in the html object or embed tag why the height and width has to be specified. Even though for this is a normal button if we do not specify the height and width there seems to be some error
HTML
<div align="center"><br />
<div style="display:block;width:100px;height:100px;" id="audio"
class="testsound" align="center"/>
<p class="clickable">
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="400" height="100" id="myMovieName">
[Code] .....
I am using the stage ScaleMode as NO_SCALE and want to know the width and height specified in HTML in the embed tag. Is there a way to go about it?
View 1 Repliestrace(root.width);
trace(stage.width);
Both these return 100. Same for height. The stage has been set to 1024x620 in the editor.I'm using CS5, Flash version 10, windows7 64-bit.I don't get what's going wrong here. I'm trying to center something and it keeps coming out like this.
I thought this would be straight forward but I'm having trouble repositioning my content. I have a button instance named rollOne, When I roll over the button I want to load an swf object but not on top of the button so I want to find out what the button's width is so I can reposition the dynamically loaded content. I thought rollOne.width would return the width, but it only returns 0 the same goes for height.
rollOne.addEventListener(MouseEvent.MOUSE_OVER, fetchQty);
function fetchQty(event:MouseEvent):void {
myContainer.x = (rollOne.x + rollOne.width);
myContainer.y = (rollOne.y + rollOne.height);
var img1Request:URLRequest = new URLRequest("8032697883620.swf");
var img1Loader:Loader = new Loader();
img1Loader.load(img1Request);
myContainer.addChild(img1Loader);
trace(rollOne.width);
}
I've come to notice recently while using bitmap objects in the Flash CS5 (maybe before as well) authoring environment that are less than 4 pixels in width and/or height that they are treated as though they are 4 pixels wide/tall. Many of the bitmaps I use are 1 px wide in one direction or the other, and they are stretched to fill an area. Lets say I have a bitmap that is 20px tall and 1 px wide, and I stretch it to be 100px wide. The "hit area" of the object, or parent objects that contain it, is 400 px wide. So even if you click a significant distance away from the object, it is still selected, and anything underneath that invisible area can't be selected.
I've also noticed that when exporting a frame as an image, the smallest the width/height may be is 4px, and when I click the Edit button in the Properties panel with a Bitmap instance selected, it opens up in Photoshop CS5 and is 4 pixels wide! I'm wondering if for some reason Flash can't handle bitmaps less than 4 pixels in width/height and is treating it as if it IS 4 pixels wide, possibly even adding 3 extra columns of transparent pixels, because if I do the same thing manually, naturally it acts identical to the way Flash treats the 1px wide version. But why? Why can't Flash handle small bitmaps? Seems to me that's more efficient than quadrupling the amount of memory required.
Is there a way to get a jpg's image and height (before dynamically loaded) within flash? The only way I could do it was to load the image into a containerMC, but I would like to do it before the image loads. the only other way I could think of was to send the image link to a php script and returning its height/width to flash.
View 5 Replieshaving a problem with loading in different swf files into the stage. If I use a empty movieclip (holder) nothing shows up but when I set the width and height of the holder_mc the swf files show up but are zoomed in for some reason.
Code:
var x:XML = new XML();
x.ignoreWhite = true;
[code].....
Is there any way to read the width and height of a flash object using jQuery?
View 1 RepliesI am trying to use IE8's IWebBrowser2 interface to obtain a webpage's embedded flash's url, height, width information. This flash can be generated by javascript. So I did like this: from IWebBrowser2 I got IHTMLElementCollection，then I iterated through the collection to get IHTMLObjectElement2，and finally called get_data() to get flash's url.
But when I tried to extract flash object's url for [URL], get_data() returned "null". Why is this?So what's the difference between IHTMLObjectElement2 and IHTMLElement2? What's the right way to obtain IHTMLElement2 from IWebBrower2?
I am trying to load an external swf file. The swf width and height is small and I want to enlarge it when loading it. (My scene has large width and height). My current code could load the file but I am not sure how to enlarge the swf width and height.
var request:URLRequest = new URLRequest("index.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);