I'm having a problem in linking sub menu buttons to specific frames in that html pageYou can follow the sample site to better understand.f these submenu buttons to [URL]
View 1 RepliesI'm having a problem in linking sub menu buttons to specific frames in that html page. You can follow the sample site to better understand. [URL] If you click on "Films" a submenu appears. I want all of these submenu buttons to link to [URL] but each go to a specific frame label in the .swf located within [URL]. For example:[URL]("equipment" frame label within .swf) or [URL]("tips and tricks" frame label within .swf)
View 1 RepliesI have reviewed and applied this wonderfull explanation contained in the post thread response from Mr. Catbert303 "linking to specific frame number or label from an html page" about the javascript and actionscript code combination wich allows the swf movie to force-jump into specific framelabel or framenumber and it also works perfectly whenever i go from the link "back to swf" on my plain html page to the movie content page (also html). But i need my swf movie content page to start playing from cero whenever it is played from start and not begining always at the specifyed frame in the actionscript code:
if (frame != "") {
gotoAndPlay(frame);
}
I have tried everything within the "if" & "else" conditionals and i can't get the swf movie content page to start playing from frame 1 everytime it is called up, but instead it looks like it reads the actionscript code described above and always takes you to the specifyed framelabel, not playing it from the start. I have a hunch i'm missing something extra on my actionscript code wich must determine if the swf file is to jump to the specified frame or start playing from cero, because if i remove the above AS2 code from frame 1, it then starts playing from cero normally like it should but won't jump to the specifyed frame when also needed from the HTML page.
Is it possible to link to a specific part of my flash movie from an html page. Is there any way to link to a frame number or label? The site is html based, but the intro/home page is flash. I don't want users to have to see the intro every time they go back to the home page from somewhere else within the site. Is there something that I can append to my link on my html page to make it go to a specific frame in the swf?
View 3 RepliesI know this sounds confusing but it's really a simple question. You can follow my site to better understand. [URL]
If you click on "Films" a submenu appears. I want all of these submenu buttons to link to (u-stu.com/films.html) but each go to a specific frame label in the .swf located within [URL]
[URL]
I have a .swf menu with 20 or so links. Each link opens up a new html page that in turn embeds the same swf menu. All I want is to simply have the html tell the swf to gotoAndStop a specific frame label that really just 'highlights' that particular button, so the user knows where they are. that's it... used to be able to do this with fsCommand, or so i thought.
View 9 RepliesI am able to pass a variable from an html link that loads a separate html file and instructs the swf embedded file to go to a specific frame. But - I now need a link within an swf file on one page to open a new page and tell that swf to start on a specific frame and it is not working. Here is the code I use for the first example - works like a champ:
[Code]...
i will send newsletter to client via emailclient clicks on image or link and it will open a specific frame in swfi know we can jump specific frame in html if swf is embed in same htmlbut i am looking for external swf in html to be played on specific frame.
View 1 RepliesI have a website that I originally began to design in flash but later started developing new pages for it in html. The flash part of it has several pages on different frames and I have created links from the flash part to the other html pages, but, I can only link the html pages back to the main flash home page, and not the other pages in the flash part of the website.
View 1 RepliesI have an HTML frameset with a leftFrame and mainFrame. My navigation has been built in Flash and the SWF is embedded in the leftFrame. The pages that the nav link to need to load in the mainFrame.I have gone through your tutorial "Flash & HTML Frames" but unfortunately it doesn't work - it opens a new window.
View 2 RepliesI wanted to know how to link Button within a movie clip linking to Frame Label?I am using Action-script 3.0
I am trying to use the following AS inside the movie clip from where i want to go to the other frame labeled as advt_sms but i am not able to go to that page [code]...
if its possible, via AS3, to create a frame label in a movieclip on a specific frame.
Obviously I can do it by manually by setting up labels on the timeline within the target movieclip, but I would rather use an array so I can loop through it, creating a label name on a the specific frame each time?
so for example I would end up with:
myLabelOne on frame 10
myLabelTwo on frame 25
myLabelThree on frame 115
etc
I wanted to know how to link Button within a movie clip linking to Frame Label?I am using Action-script 3.0
I am trying to use the following AS inside the movie clip from where i want to go to the other frame labeled as advt_sms but i am not able to go to that page[code]...
I am loading a swf into an empty MC with this code:
on(release) {
loadMovie("movie.swf", _root.container);
}
what I want to do is also go to a specific frame or frame label in that loaded movie. I thought I could do it by adding something like this:
_root.containter.gotoAndPlay("frame");
Is there a way to get the frame label on a specific frame, without it being the current frame?
I've tried accessing it through:
this.scenes[0].labels but it doesn't allow me to check a specific point on the timeline.
I have been researching this for hours and cannot seem to find an answer anywhere. Right now I am linking one flash file or .swf file within my main flash site using a button.So in my main flash site, I connect to this .swf file by using...
on(release){
loadMovie ("MDsite2.swf", _level0);
}
This works perfect but the .swf file starts at the first frame. Is it possible to a jump to specific frame within that .swf file so it doesn't start on the first frame?
I have 2 SWF's:SWF1 = AS2 SWF2 = AS3I need to link from SWF2 to frame 10 of SWF1. Is this posible?If not, is it posible doing this with html/javascript? With the <a> tag?
View 1 RepliesI am trying to use this if statement with a frame label instead of a frame number. I believe that _currentframe is looking for a number only. Is there a different command that looks at frame labels instead of frame numbers?
View 1 Repliesis it possible to find the frame number of frame label with AS if a button is rolled over, the timeline jumps to a label - which plays a set of 3D rendered frames to 'raise' and element, once a user rolls out of the 'button' area the button is meant to 'lower' - which can be done by simply playing backwards to the previous label.
View 5 RepliesI am trying to use this if statement with a frame label instead of a frame number. I believe that _currentframe is looking for a number only. Is there a different command that looks at frame labels instead of frame numbers?
View 1 RepliesTrying to create a link from an html page to the contact section of a flash website. I understand how to link to a specific frame by creating an anchor over the target frame, but it only works if its in a single movie. The problem is that the section I want to target is on a deeply nested movie which the main movie loads such as
Code:
loadMovieNum("images/topback.swf", 8);
Instead of the html code looking like this "index.html#contact" for a single movie what would a nested link code look like?
I know. This topic has been addressed several times in various posts. And I've read and tried all of them, however nothing seems to work. I'm not sure if due to the circumstances...I'll explain.
I have made 2 files: main.swf and products.swf. A button in main.swf has the following code:
on (release){
_root.loadMovie("products.swf");
}
This works great, but what I really want to do is go to frame label "Range" in products.swf. A note of explanation: I'm not trying to load products.swf into a container movieclip, I want to replace main.swf with products.swf and go to Range label.
Is there a simple way to get the frame number of a frame label?
View 2 RepliesI have an intro MovieClip that plays before entering my site. As of now, the user has to manually click an "enter/skip intro" button before they can go to the html page where the website swf is.
View 3 RepliesI'm working on a Flash navigation system.
Currently, when you click on "Recent Projects", you are brought to a frame containing the following actionscript:
attachMovie("recentProjectsBody_mc", "recentProjectsBody_mc", 1);
recentProjectsBody_mc._x = 60;
recentProjectsBody_mc._y = 195;
This loads a new movie clip of a simple slideshow which has 7 frames. You can click through these frames with left and right buttons.
I no longer need the left and right buttons. I need a group of 7 buttons sitting under the "Recent Projects" link which each link to a different frame of the recentProjectsBody_mc movie clip.
I assume I need to load this movie clip before I link to a frame within it. But then how do I link to a specific frame within that movie clip?
I am trying to animate this piece with frames.
Basically, I have adrop down menu, which contains about 20 buttons. Each button is set to _root.Keys_MC.gotoAndPlay("frame label"); a specific from within the Keys_MC which is on the main timeline.
The problem is, no matter which one I click, it always links me to the first frame of that movie clip.
I'm having a problem trying to call an specific label or frame in a secondary MC.
-There is a main time line (120 frames) with an Intro animation stop in frame 103.
-There is 2 buttons in frame 103 (b1,b2). On release this buttons play 104 and stop in the last frame of the main time line (120).
-In the frame 120 these 2 buttons fade and an MC called navmenu and an empty mc (to load external flash) appear
-MC navmenu is the main menu with 6 frames, one for each button.
I'm trying that when I click on b1, it play 104 go to the end of the main time line, and call frame 3 on navmenu MC, plus load movie on empty MC.[code]...
I'm trying to access a specific frame label in an externally loaded swf. I have the external swf loading, but I'm not sure how to access the specific frame label after release. This is an example of the code on my external swf timeline:
[Code]....
Okay, I know. This topic has been addressed several times in various posts. And I've read and tried all of them, however nothing seems to work. I'm not sure if due to the ircumstances...I'll explain.I have made 2 files: main.swf and products.swf. A button in main.swf has the following code:
on (release){
_root.loadMovie("products.swf");
}
This works great, but what I really want to do is go to frame label "Range" in products.swf. A note of explanation: I'm not trying to load products.swf into a container movieclip, I want to replace main.swf with products.swf and go to Range label.
Is it possible to find out the first frame of a label without going there then put it in a variable in AS2 or AS3?
View 2 Replies