I have this switch and I know there must be an easier way to accomplish this. For example if the user selects something it sets that button to a certain frame in this case nSelected, and sets all other buttons to a frame labeled nDefault.[code]...
View 4 Replies
I've got the following code (what it should do: on keypress, loops through movieclips, scaling each one toward center stage). However, where it says "this" is making the program think I'm referring to the stage, so it's scaling that instead. 1. How do I specify "whatever the current case/movieclip it's working on now"?
2. How do I add sound to switch case transitions/tween? (meaning when each mc is tweened or transitioned, it also makes a sound)
[Code]...
If the subject isn't entirely clear, it's because I'm not sure how to describe what I want to do. What I have currently is a large group of ComboBox components which trigger an event handler, which uses a Switch...Case statement to determine the selection, and then uses another Switch...Case to figure out which ComboBox actually called it so the function called can use the appropriate arguments. The way I have it written has bloated the code, so I'm wondering if there's a shorter way to do this.
[Code]...
I have a function videoList which I want to sort through my video URL's in my XML, using a switch/case method. The for loop in each case is bringing back all videos in the XML. How can I get just the videos for a particular case? Example: Introduction has one video, Our Work has none and Our Services has 5.
[Code]...
What I'm trying to do is create a program that, depending on 2 variables, multiplies another variable by a static number. Heres the code I have so far:
[Code]...
I want this on an MC:
[AS]
i = 0;
switch(thing){
case 0:
[code]....
Basically what I'm wondering is, will I lose the value of i in the first switch once I'm out of the switch? Can the second switch read the 1st switch?
Im trying to create a program that, depending on 2 variables, multiplies another variable by a static number. A friend suggested I use case/switch instead of if/else statements,which is what I was using before.
[Code]...
A quick review of the project, I am importing information from an xml file into an array. From there I have passed the information from the array to a variable.I find it that when I try to match the variable to a string letter, that it is not running through the case switch properly and going straight to the default bit. I have tried numerous solution to check where the problem lies;I have trace the actual position of the array to check if it is the correct letter I am trying to match.Did a length check on the variable that it is only 1, and not containing any spacesWhen I hardcode the letter into the variable, the case works perfectly.Any idea on why this is happening would greatly be apreciated. I have pasted a sample of the code below;
var switchTest = initialSlide_array[1];
switch (switchTest) { //switch case used to check template type
case "A":
[code].....
I need to replace some text - it's actually a bunch of textInput area data captured and placed together {inputArea1.text}{inputArea2.text} style - and have it placed in an mx:Text text="{inputArea1.text}{inputArea2.text}".So I have the smart idea to pull a switch case, where the case condition is the id of the canvas and it's pulling from the textInput areas.My output from the aforementioned string into my text just yields: Code:function Function() {}I complete this, I can sleep.
View 11 Repliesi have created a switch that assign different case to different toggle buttons. so when each case is activate, it loads a different swf.so far it works fine..It's going to be like a sub menu thing, the toggle button remains activated so viewer know which page they are at right now..until they click the next toggle button..so on and so on.
[Code]...
ActionScript Code:
function changeBox(event:MouseEvent):void {
switch(box.boxclass.whichboxvar) {
[code]......
In other programming languages that use switch/case, I was often able to set a range. In the documentation (flash help) they do not show the syntax for this. Is it possible to do so, such as:
Code:
switch (theAnge)
{
[code].....
I want to create a application for a website, that can calculate a persons daily energiexpenditure. The user of the application has to put in his/her height, weight and sex. So I want the program to switch between diferent formels depending on the input given. For example the formel for a girl, age 8, 38 kg and 1.40 cm is: (0.071*38)+(0.68*1.4)+1.55
And the formel for a man, age 30, 75 kg and 1.80 cm is: (0.064*75)+2,84
how would you do the coding?
I considering making a if-else construction, that checks whether the sex is male og female. And within this if-else construction i want to make a switch case, thats switches between different forms depending on the age input.
This is what i've done so far:
ActionScript Code:
public function energyintake()
{
var h:uint = 180; // The persons height in centimeters
[Code]....
I've got flash page with a spherical design, cut into pieces like a pie. Underneath that I'm putting a series of square buttons that are color chips. What I'm wanting to do is be able to select a cut piece (one at a time) of the design by clicking on it (each piece is a button) and, once that piece is selected by clicking on it, be able to click a color chip button to color it.
Theoretically, I could click on the top right quadrant of the sphere design, then click on the black color chip beneath and it would turn black. Then if I decided to click on the red color chip I could click it and it would turn red, and so forth. Then after tiring of coloring on the top right quadrant, I could click on the bottom left quadrant, then click a color chip and colorize to my heart's content. Same with any other part button of the sphere that I click on. Only one part of the sphere design could be colored at a time.
What I'm seeing is that I'd need to set the individual sphere design button components as triggers, then write my own switch/case statements for the color chip buttons to say, if this trigger's selected, then color it "mycolor", etc.
I would like to use a switch statement i.e.
[Code].....
What I am trying to do is to say that the condition is if the name property has an A character in it and anything afterwards. Is this possible or am I nuts.
I have an array of movie clips that are placed on the stage (this works fine) but I want to give each movie clip a value so that I can check what the user types.
Ex.
Code:
_root.createEmptyMovieClip("Placement", 2);
var shapes:Array = new Array("square", "circle", "triangle");
function selectshape():String {
[code].....
I have an object that contains times to call a function. Would like to use Switch/Case to test against video stream time. Right now using a For loop every second to test against 50 times is causing super sluggishness. Hoping there is a better way that doesn't require so much testing. So is it possible to use a Var as a Case testing numeral? Meaning...
[Code]...
I am doodling at work and wondering if this is possible. Unfortunately I don't have flash in front of me so I can't test it but since my AS.
I want this on an MC:
[AS]
i = 0;
switch(thing){
case 0:
some action; break;
[Code] .....
Will I lose the value of i in the first switch once I'm out of the switch? Can the second switch read the 1st switch?
how can i simplify this code:
PHP Code:
stop();
import com.greensock.*;
import com.greensock.easing.*;
import flash.events.MouseEvent;[code]........
I think, for loop can be used but i don't know how
im a complete noob. how would i get this code into a simple 'for loop' to add 3 sprites named heart1, heart 2 and heart3. basically to simplify this mess
ActionScript Code:
var heart1:Sprite = new Sprite();
with (heart1.graphics) {
beginFill(0xFF0000);
drawRect(0,0,20,10);
[Code]...
I'm trying to use the value from a combo box in a switch case statement but it isn't working
Code:
var switchValue:int = 0;
switchValue = int(cmbColour.selectedItem.data);
switch(switchValue) {[code]....
I have a set of switch case conditions. On the last one, i want it to run a function called mainMenu, so i put:
[Code]...
I have a string "52x + 60" and i want to extract 52x and 60 using regular expressions and a switch case
Is this the right way of doing it?
var equation:String = "32x + 5"
var numberExract:RegExp = /d+/
var xExtract:RegExp = /d+/x/
for(var i:Number=0; i<equation.length; i++)
[Code]...
i have the following switch case:
switch (appModel.currentPage){
case "Programma":
case "Winkelwagen":
case "Films":
case "Contact
[Code]...
after coding a custom event in AS3, i've come across a curious problem:
override public function toString():String
{
switch (type)
[Code].....
i can remedy the problem easily by adding return null; at the end of the function, but that's redundant and it annoys me that it seems to be the only solution.
why is returning a value from a switch case not seen by the compiler? is this an issue specific to the AS3 compiler or am i actually attempting something here that is so completely dangerous and adverse that it shadows counterculturists the world over.
I'm trying to use switch/case staement instead of if/else but it's not working. Here's the code.
ActionScript Code:
//working code
function checkTarget(drag){[code].............
The switch case doesn't works with function. This is the AS3 code:
ActionScript Code:
var med:Number, mdi:String, op:int, tot:String;
bt1.addEventListener(MouseEvent.CLICK,yardas);
function yardas(MouseEvent:Event):void{
op=1
[Code] .....
Im trying to make a small program that convert characters into others. (it is useful when some program doesn't recognize Cyrillic characters and give back strange symbols as "_˛". The problem im facing is the impossibility to specify 2 characters under "case"
[Code]...
Is it possible to make a multiple switch to check more than one case at a time? I'm trying to use a case statement to check both frameName and buttonNumber to check boxes ticked for multi-choice quiz (there can be more than 1 ticked per question).
I've used various combinations but they only partially work. This is one of the latest (I'm still tinkering).
[Code]...
How do you do a range using switch statement in ActionScriptFor example:
score = txtScore.text
switch(score)
{
[code].....
