I'm trying to load some html into a dynamic text field. All the hints I've found online are in AS2 and use the LoadVars function which is no longer a part of AS3.
myLoadVars = new LoadVars();
myLoadVars.onLoad = function() {
// the data is loaded in the myLoadVars object as a property of the object
myText.htmlText = myLoadVars.myHTMLdata;
}
myLoadVars.load("myHTML.html");
I'm trying to load some html into a dynamic text field. All the hints I've found online are in AS2 and use the LoadVars function which is no longer a part of AS3. convert this to AS3?
[Code]....
I'm trying to use a dynamic text field to pull in html text that contains a bulleted list. Easy enough, that works. But the bullets dont take on the color assigned to the field. I've tried putting it in the html text and also using NewTextFormat and neither work. Can someone help me. This should be a simple fix, but I can't find it... I just want my text and bullets to both be white.
Simple code below. Using html text inside the flash document and having a dynamic field on the screen named txt. Code should turn text and bullets green, but it doesn't work, only text turns green
this.txt.html = true;
var my_fmt:TextFormat = new TextFormat();my_fmt.color = 0x00FF00; // hex value for green
this.txt.htmlText = "<P> This is the first paragraph</P><BR><UL><LI>Bullet 1</LI><LI><BR>Bullet 2</LI><LI><BR>Bullet 3</LI><LI><BR>Bullet 4</LI><LI><BR>Bullet 5</LI></UL>";this.txt.setTextFormat(my_fmt);
I am using a dynamic text field to show html formatted text from .txt files. I have set the html property both in the properties panel and in AS, and it mostly works. All html formatting show up just fine, except for when "&" is used. Flash CS3 documentation indicates that & is supported, so.? All text after the & does not appear: the only text loaded is that that comes before it. I am using CS3, AS2, publishing in Flash Player 9. Sorry if this problem has been addressed elsewhere, but I've had no luck with my searches.
[Code]...
I'm building this flash site for a friend and he wants to be able to edit the contents and maintain the site by himself later on. So naturally, I used a dynamic text field that uses URLloader to link to an external html, dandy. Problem is, my friend wants to use dreamweaver to edit the contents of html (or even just a word document exported as html) and it's just driving him nuts because the text look nothing like that way it did in DW when it's loaded into the dynamic text field (extra spacing and line break popping up randomly everywhere). Is there an alternative solution other then telling him to just edit it in notepad? What if I switch over to XML?
View 2 RepliesI'm able to use a .txt file with basic html elements inside to display correctly. But I now have a structured document done in ms word. If I copy the html and try to save as a .txt file it will only allow to be saved as .rtfis there a way to preserve all the font, breaks and styles from a doc saved in .rtf or can I do this in a different way.
View 1 RepliesI currently have a dynamic text box that pulls from an external text file, but I want to spiff it up a little bit: I want the text box to include a series of links that go to another frame, and with another dynamic text box that pulls up the corresponding story.Basically, I want the main "news" page to be an updateable archive of links to the "news story" pages. This all, however, has to be in Flash, as the website I'm working on it one .swf movie. I am very inexperienced in working with CS4/Actionscript and even less experienced in HTML
View 1 RepliesI cannot seem to get a horizontal rule to appear in either html or css.Here is my as3 code. I am briniging in a RSS feed and displaying nodes in a Dynamic Text field. It is working very well but I cannot get the Horizontal Rule to work...
ActionScript Code:
var myText:String = "<p>"+firstheadtext+"</p>"
+"<span class='myTextStyle1'>"+firstbodytext+"</span><br/>"
[code]....
This is not the whole code. I have omitted the RSS loader and the CSS loader and the Text field.
I'm able to use a .txt file with basic html elements inside to display correctly. But I now have a structured document done in ms word. If I copy the html and try to save as a .txt file it will only allow to be saved as .rtfis there a way to preserve all the font, breaks and styles from a doc saved in .rtf or can I do this in a different way.
View 2 RepliesIssue: dynamic textfield created at runtime with html text doesn't display bold and italics.
Having the Font symbol in my library with the linkage name "Avenir" :
[Code]...
The textfield totally ignores the bold html tag. The right font is displayed but the html tags are ignored. So if I want one text field to be able to dynamically display bold and italics (html text) using a Font Face in my library...how do I do it? What am I missing?
I have the following code:
Code:
myData = new LoadVars();
myText_txt.html = true;
myData.onLoad = function() {
myText_txt.htmlText = this.myVariable;
};
myData.load("events.php");
I have a text box on my page that has an instance name of myText_txt so it should load the data from the events.php into the text field. I've enabled HTML on the text box and made it dynamic and multiline. When I output the PHP file the text box is blank. Here is the PHP file:
PHP Code:
<?php
echo "&myVariable=This is some text. Here is a link: <a href="http://espn.com">ESPN</a><br><br><br> Here is <img src="arrow2_as2" id="arrow2_as2">";
?>
why it won't output any of the HTML text?
I've created a dynamic text field where I've insert into a lot of HTML code. Since it's too much long I've used a default scrollbar and simply dropped it onto the field so that It's linked to that. When I try it the bar is there but I can just see the upper arrow and the bottom one; the middle part isn't visible and I can't scroll down the HTML content.
View 5 RepliesI'm trying to load an external html file into a dynamic text field. The dynamic text field has html display enabled. The html file contains a list of links in <a> tags, and nothing more. The dynamic text field is called 'dynamictext', and I've tried:
Code: Select allvar externaltextload:URLLoader = new URLLoader( );
externaltextload.load(new URLRequest("text/Links.html"));
externaltext.text=externaltextload.data;
[Code].....
I have a very basic flash document, with a dynamic text field called myText, and a script to load an external html-file into that field. The script is from a tutorial somewhere, so I'm not 100% sure it's optimal, but it works. What I want to do is modify this code so that a clicking a button in this document will switch the input file from demo.html to another HTML-file, say demo2.html.
var url:String = "demo.html";
var loadit:URLLoader = new URLLoader();
loadit.addEventListener(Event.COMPLETE, completeHandler);
[Copde]....
I'm trying to load an XML file and place the content into a dynamic text field. The XML nodes contain content within CDATA sections that have basic <b> and <i> tags. Once I have the content loaded into a variable and trace it, I can see all my tags within.
I then place the content into a dynamic text field with html set to true but for some reason it doesn't show any formatting, the tags appear to have been rendered because they don't show up inline. I thought maybe this was due to embedded fonts but i have all of my bold, bold italic, italic and regular font's within a text field embedded so I wouldn't think thats an issue. Is there something I'm overlooking?
If you're creating a htmlText field via the createTextField method, is there a way to get html formatting like <b></b> to show up if you are also embedding a font? I'm guessing not, since you can only embed a single font in a TextFormat, and you would have to embed both italic and bold variants too to make it work. Is this true?Maybe I'm better off creating a generic text field on the stage with both bold and italics embedded, and use the attachMovie method instead?This is my code:
ActionScript Code:
myformat = new TextFormat();
myformat.font = "Akzidenz_Grotesk_BE_Light";
[code].....
I have a dynamic text on the stage which gets updated (shows numbers) when some buttons are pressed.I just need to know if it is possible to show the first dynamic textfield in another dynamic textfield.Lets say the first dynamic textfield called "price" and the second one called "price2". when a button is pressed, the first dynamic textfield "price" will show a number. is it possible to show whatever is shown in the "price" in "price2" ?
View 1 RepliesI'm creating an XML-driven pie chart in AS3 with 2 text boxes in each pie slice. Both text fields are dynamic in the sense that they are populated by the XML doc and then told where to place themselves in the AS3. I've got them both using the same x and y position to place themselves at the moment (which of course puts them right one top of each other), but I'd like to make one of the fields (which acts like a label or a title to the larger number and % text field) place itself in a particular spot around the other text field. The result I'm looking for is to have the smaller "title" text field appear approximately 5 pixels above and left-justified to the larger "percentage" field.
Anyway, here are two sections of code that I've currently got. The first chunk, for the Tags portion, sets the position for the "percentage" text field using a good old x and y method. The second chunk, for Titles, is setting the position for the smaller "title" text.
//evaluate tags
private function evaluateTags():void{
for (s=0; s
[Code]....
Currently I'm using javascript which works fine to pass text from textfield A to textfield B:
Code:
window.onload=function()
{
document.forms.form1.shirtText.value=document.forms.form1.KitGroupID_16_TextOption_38.value
}
Is there a way to pass the textfield A text to a dynamic text input (flash) as I'd like to use the font embedding flash offers. I can make it work when loading a value from a txt file but I'm not sure how to access the value identified above as KitGroupID_16_TextOption_38 and make it appear in a dynamic input box. Eventually I might want to have 3 font choices for the user but I'd like to just see if I can get this working properly first.
Is it possible to login through flash using one Dynamic Text Field and one Input Text Field and no buttons? If so how? I have seen many tutorials dealing with logging in to PHP using flash but it requires you to make your own php scripts which i am not familiar with. Can some one tell me how to do this with PHPBBs existing php scripts... I want to be able to login thorugh a Input Text Field box and have it verify it in PHP and also be able to register and view other PHP info such as users online and FAQ..
View 2 RepliesNovice in actionscript and have a problem loading an html file combined with a css stylesheet into a dynamic text field. I have 2 pages... 1st page always loads correctly but second page all you see the text fields is "undefined". When I view local machine all is well until I load onto server and for the first page of my site all is well but for the second page I receive "undefined" in the dynamic text field... This only happens the first time. When I click through the different pages('undefined', 'undefined', 'undefined'..) and return to the previous ones the text suddenly is displayed correctly! I have read elsewhere that I need to wait for the LoadVars onload command to finnish but I am at a loss to fix this...
Code:
var myVars:LoadVars = new LoadVars();
var styles = new TextField.StyleSheet();
var txt_url = "booking.htm";
[Code].....
Trying to get a text field in my Flash MX movie to pull from and XML file with CDATA tags to show as HTML. I've checked the box to render as HTML for the text data field... but I'm having problems with the Actionscripting.
The field from this line is what I need to recognize as HTML reading CDATA tags:
this.ref["textField"+i].text = subnodes[3].firstChild.toString()
I know I need to do more than just change it to ".html" instead of ".text" and have tried a couple things, but nothing seems to work.
Code:
//Create the XML Object
myXML = new XML ();
myXML.load(newXml);
[Code].....
i have a problem with the line space flash creates when a dynamic text is loaded in a dynamic text field on the stage i put a dynamic textFild with istance name "profile_text". then im loadin in it a text. my text is written in the Notepad like this
[Code]...
i already set a Textformat to my dynamic text with i tryied to play with the "Leading".. but i think it something dealing with paragraph. how i can decrease spacing between paragraphs??
All I want to do is add text from my string to dynamic text field when I click dynamic buttons. What should the as code be for this? Here is my code. Right now I just have the click returning another shape.
[Code]....
What I'm trying to do is to write something in an input field and then it should show up in a dinamic field. I can make this happen, but the problem is that the dinamic field shows its new text in the same format as the Input field. For example, the input text is written in TimesNewRoman and the dinamic text is in Arial, but when the dinamic text shows the input, the text is still in TimesNewRoman when I want it to be in Arial.
View 11 RepliesI have a text field component that I am dynamically populating with text. The words appear one letter at a time in a teleprinter style fashion. I also have rendered certain words with HTML to make style changes within the text.Now all this works fine, except because the HTML text is larger than the body of the other text, I am losing theteleprintereffect at the bottom of the text field. In other words, after a set amount has been printed, users are not seeing the letters printed out one at a time, but instead just get a printed line of text appear from beneath the visible section of the text window.
View 2 RepliesI embed image in html text field like [code]...
The problem is that text is being wrapped around an image. How can I get the text to be displayed under the inserted image?
I have 2 input textfields on the stage and 1 dynamic textfield.
-input1 is for quantity
-input2 is for page count
When a user enters a number into the page count it makes a calculation and places the outcome into the dynamic textfield. This textfield is for the individual price.All of this so far works. What I want to do now is create another dynamic textfield for the total. So the individual price is multiplied by the quantity and this result is put in the new dynamic text field. I have the code for that working but here is where it gets tricky (for me anyway).The total price is to start off invisible. When I roll over the individual price the total price is to appear (For a test lets just say when I roll over an area the total price appears).To stop cursor flickering this should be done inside a movieclip. So... I have create a movieclip and placed a dynamic textfield inside it. They all have instance names BUT how do I reference it in script?I need to tell the resulting calculation to be placed inside the textfield which is inside the movieclip. If it isn't inside a movie clip I can do it. But how to I reference it when inside one?
Problem: I am trying to get a very simple text resize going, for my main content area in a flash website. My aim is to get a button, that on click, increases the text size of a dynamic text field.
[Code]....
This is what I tried, I am very new to Action Script, so excuse the futility of my code.
I'm trying to input a dynamic text field into many dynamic movies. I use a for loop to successfully create 18 movies. I can't seem to get the text to be input dynamically however. The dynamic text field in the dynamic movies is named eventText. This code in the for loop successfully creates 18 movies:
[Code]....