EDIT: I'm using CS4 I'm receiving this error: TypeError: Error #1010: A term is undefined and has no properties. at Main_fla::function_holder_mc_16/cleanList()
[Code]...
You can find my file at: [URL] Below is my function to clean my list. That part works - however for some reason I'm getting errors...
[Code]...
The first 2 loops set the textfields just fine. But the next 2 give me the error Error #1010: A term is undefined and has no properties. Something is NULL, but what? Can't figure out :(
[Code]...
i have been taking lee brimelow's tut on scrolling images. the code works fine in a stand alone file, but not when i try to add it to an existing .fla file. i am getting the dreaded TypeError: Error #1010: A term is undefined and has no properties. at index_fla::scrollBox_8/frame1()
HERE IS THE CODE:
import caurina.transitions.*;
var yOffset:Number;
var yMin:Number = 0;
var yMax:Number = sb.track.height - sb.thumb.height;
[Code].....
in my movie i have to call frame 2 of foto_galleria movie that is on the root of the movie and it has the correct instance name foto_galleria.
I Always get Error #1010: A term is undefined and has no properties. when i click on the image that call the frame...
The movie clip that makes the call is in root -> Infinite Gallery -> Gallery Images and has a name of My Image 4, if you open it you can see that actionscript below in a layer and the bitmap that should be pressed in the other layer.
Code:
import gs.*;
TweenMax.to(this, 0.5, {blurFilter:{blurX:5, blurY:5}});
this.addEventListener(MouseEvent.MOUSE_OVER, mouseOverHandler);
[Code].....
i have an error im struggling with help please
TypeError: Error #1010: A term is undefined and has no
properties.
at
videoplayerpositions_fla::MainTimeline/getMetaInformation()
at videoplayerpositions_fla::MainTimeline/sbit()
at
videoplayerpositions_fla::MainTimeline/stopDragging()
TypeError: Error #1010: A term is undefined and has no properties.[code]....
View 1 Replieswhen i run my flash file (test it) in the output panel i get the following error
TypeError: Error #1010: A term is undefined and has no properties. i read some where, that this was caused because one of the variables is set to null. after looking at my code i found out that the following line was causing this output
arrSelectedIndex[i] = -1;
this is later on used as the selected index in a group of radio buttons.
I keep getting this error when the game is playing but can't find what is causing it i am hoping some one else can see what i am missing. I think it is at line 75 which i have marked.TypeError: Error #1010: A term is undefined and has no properties.at game_code/moveObjects()[G:Web Games Programminggamegame_code.as:75]
package
{
import flash.display.MovieClip;
[code].....
I am trying to build a simple accordion in AS3 based on Lee's tutorial in the November Layers Magazine: [URL] I just wanted to make it so that the cursor changed to indicate a mouse event when you mouse over the tab of the panels. So I've tried putting invisible movie clips (with their button mode on) and buttons on there, and it breaks the SWF every time.I'm sensing that the problem is that when the AS is looking for a mouseover event on that particular panel/mc, if it encounters even a child of that mc instead of the root clip, it doesn't like it.
View 1 RepliesI am getting this error: TypeError: Error #1010: A term is undefined and has no properties.
at CustomCushion$iinit()
This is the code
Select allpackage{
import flash.display.Sprite;
import flash.display.BitmapData
import flash.events.Event;
import flash.geom.ColorTransform;
[Code] .....
Error #1010: A term is undefined and has no properties
View 8 Repliesi am running into the error: "#1010: A term in undefined and has no properties." this is refering to the line:
trace ("btnLMain.langBoxS.name: " + btnLMain.langBoxS.name);
but i dont understand how this could be as i have each of the above defined as shown here:
Code:
var langBox:Shape = new Shape();
langBox.graphics.beginFill(0x000000, .75)
langBox.graphics.drawRect(0, 0, bxW, bxH); //i have bxW and bxH defined earlier in my code
langBox.graphics.endFill();
[code]....
I've created a .flv just to test things out, see what I can do and so on, I created a drag and drop MC object, that works fine, I then created a Drop zone, but when I preview the movie and click the button that navigates to the frame that contains the drag and drop, I get this error: TypeError: Error #1010: A term is undefined and has no properties. at Testing_fla::MainTimeline/frame5() I was aiming to get the frame to change once the object is dropped into the zone, the movable object's instance name is orangebox and the dropzone's is circleHit
View 2 RepliesI'm trying to create a website in flashcs5 for a class project.Inside the project i have a movie clip which contains my menu buttons and I've placed that movie clip on the main timeline in scene1.I've used action script to link the buttons from the mc to the main timeline. All the buttons are working except the button "recommended". I keep getting this error:
TypeError: Error #1010: A term is undefined and has no properties. at dreamcatcher_fla::MainTimeline/frame1()
Here is the code in the actionscript:
Object(root).menu_mc.dreamcatchers_btn.addEventListener(MouseEvent.CLI CK, fl_dreamcatchers);
function fl_dreamcatchers(event:MouseEvent):void{ gotoAndPlay("dreamcatchers");}
Object(root).menu_mc.legend_btn.addEventListener(MouseEvent.CLICK, fl_legend);[code]....
I've double and triple checked all the instance names and there are no problems. The code for recommended is exactly the same as for all the other buttons so I don't understand what's going on.
I have a project due in a week, and I'm lost! I'm having a lot of troubles with action script since most of the project is based on self learning Part of the project is a game attached to an interactive representation of the blood components for children (it's a very minimal representation).The game consists of 4 objects, one of them is player controlled (WCell), and the other 3 are supposed to randomly fall -top to bottom-, the player gets points for "eating" the correct object(germs), and loses points for eating the wrong objects(tasiyot_MC & RCell_mc). I'm attaching the code here, hoping that someone in this huge forum could help me find out why am I receiving this error:
[Code]...
I have this simple sliding panel that is giving me an error. It worked when I had it in a separate .fla file but when I imported it to my project I can't get it to work anymore. It gives me the following error when I click on the panels: TypeError: Error #1010: A term is undefined and has no properties.This is the code:
Code:
public function onClickPanel(e:MouseEvent):void
{
var clicked:MovieClip = MovieClip(e.target);[codew]....
when I run the debugger it points the error to this line
Code:
if (mc.props.ind <= clicked.props.ind)
I'm getting this error when testing my movie which is stopping it from playing:-
TypeError: Error #1010: A term is undefined and has no properties.
at Main/completeXML()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
I have a movie player that triggers lots of events (Slide2) throughtout and this has been working fine.Then added some navigation cue points (Jump1) just before each of the event cue points in the FLV (using Premier)So now the move plays fine and the first event cue point trigger the events it's supposed to.But using seekToNavCuePoint("Jump1") or when the moive plays past the cue points I get the following...
Reached cue point named Jump1TypeError: Error #1010: A term is undefined and has no properties. at Remote_fla::video1_2/cuePointListener() [code].....
Is there a problem using both navigation and event cue points in a movie?
I have a set of sliders in an array called "slidertiles" populated with MovieClips. I am trying to set up a randomization function set to execute on a button click.I also have a MovieClip named blankSlider that is invisible to use as the blank space.
It will run correctly a few times, and each of the "if" statements has been returned successfully, but within a few iterations, it will come up with this error: TypeError: Error #1010: A term is undefined and has no properties. at MethodInfo-46()
Here's my button code:
setSliders_btn.addEventListener(MouseEvent.CLICK, findRandomValidSlider);
and here's my function code:
function findRandomValidSlider(e:MouseEvent):void {
// run the function 100 times
var j = 0;
[code]....
I'm receiving the following error while coding my storybook.
Quote:
TypeError: Error #1010: A term is undefined and has no properties.
at Main()[M:DocumentsInteractiveStorybookMain.as:22]
I am working from "Foundation Games Design with Flash". My code is below.
Code:
public function Main()
{
startPage = new StartPage();
hillPage = new HillPage();
pondPage = new PondPage();
[code]....
In particular, it is these 2 lines of code that are causing the problems (after a few rounds of debugging.
Code:
hillPage.startButton.addEventListener(MouseEvent.CLICK,onStartButtonClickHill);
pondPage.startButton.addEventListener(MouseEvent.CLICK,onStartButtonClickPond);
i have done all the code so my video will only play when i go to that specific page for my website and wont continue playin if i go to another page... but when i do all my code i get this in the output when testing... now I know all the code is right because im following a tutorial:
[Code]...
when I try to reference the bullets it fires it keeps coming up with Error #1010: A term is undefined and has no properties. It's doing this when I try to reference a alien spacecraft bullet in the "update" function. I've marked what line the error occurs on. And the bullets don't move.
[Code].....
I am using external AS classes / doc and keep getting this error:"A term is undefined and has no properties at MethodInfo-4()"the button works fine with the trace, but when I add the functionality i keep getting above error, here is the doc, and button class files, oh and the files are all in the same place
Code:
package {
import flash.display.MovieClip;
import flash.display.Sprite;
[code]....
Ok, this is driving me insane.I have my AS3 on the main timeline in the first frame:
Code:
import flash.events.MouseEvent;
import flash.net.navigateToURL;
[code].....
I'm having trouble getting to the bottom of this error. The debugger says my class is undefined. Wonder if you might have some ideas, I cannot manipulate the properties in side the Ball class I have created in my main document class.May be a scope error of some kind or a problem with my Ball class declaration.
Code:
/* Main Document Class*/
package {
[code].....
i am just trying to get data from wcf web service to as3 using aducentes class.i connect normally to web service but when i try to acces methods i get the error of TypeError: Error #1010: A term is undefined and has no properties..
import alducente.services.WebService;
import flash.events.*;
var ws:WebService = new WebService();[code].....
ok so I am making a game for a college course and I am having some difficulty getting the collision between my player and the walls to work. Here is my code
Code:
// Collision Wall Test
public function WallTest()
{[code]...........
I'm getting this error every time the function is called
"TypeError: Error #1010: A term is undefined and has no properties.at GamePlay_v01/WallTest()at GamePlay_v01/keyDownFunction()"
I've been at it for hours and cannot figure out for the life of my why its not working. I have set up sentry points around as a perimeter on my character.
I trying to migrate below eval to AS3 by using addEventListener as shown below on AS3. But it show some "TypeError: Error #1010: A term is undefined and has no properties"
[Code].....
So i have my items that I bring onto stage with my loop function with dynamic text fields within the loop. If I want to clear these items using a reset button on the stage how can I do this. From my code below when I press the reset button I receive: TypeError: Error #1010: A term is undefined and has no properties.So a little snippet of my code just to give an idea what I use to bring items to stage and what Im trying to use to reset[code]....
View 4 Repliesim trying to make as3 letters mouse tail and here is the code
ActionScript Code:
var Text = "Some Text";
var letters = Text.split("");[code].....
and im gitting this error message
ActionScript Code:
TypeError: Error #1010: A term is undefined and has no properties.