bring object to the front flash (code snippets)-- How can I make this a rollover rather than requiring the user click on the object i.e. they just need to move cursor on top of the object and it will be brought forward.
View 3 RepliesI've got a mega tight deadline and I need to figure out how to bring a button to the front when it is rolled over. I have a scene with six buttons. When each button is rolled over the roll over state contains a movie that runs and animation that 'grows' the button to reveal other information. The problem I have is the 'depth' each of these buttons are on. The top button works fine and goes over the other buttons, but the bottom level button expands below all the other buttons. If you look at the attached screen grabs you will see what I mean. What is the actionscript 3.0 I need to use and where and how do I apply it?
View 1 Repliesi have created a little gallery and set the images as buttons, on the rollover they expand to 2/3 the stage, they expand behnd the other pictures/buttons.
i want them to open ontop of the other buttons?
I have tried to bring them to the front, through right click and selecting "arrange""bring to the front" but this doesn't work?
included is the swf.
Is there any way to bring a duplicate mc with a variable depth to the front on RollOver, and then return to it's original depth on RollOut?I am currently using swapDepths(1000).I can't have the exact depths swapped because there could be any number of duplicates on screen at any given time, so that won't work.The code I have works to a limit; when I mouse over the mc duplicate, it moves to the top just fine, but multiple other mc duplicates below it scramble depths (that is to say, they move up and down in depth at random).I want two thing to happen to only one mc at a time.
1) bring to front onRollOver and return to original position on RollOut
2) bring to front onRelease, and stay there in front.Here is what I have so far.
var num:Number;
if(num == null){
num = 0;[code]....
So, I have a line of buttons that pop up when moused over. Unfortunately, due to their proximity to one another, I have a lot of overlap occurring. Is there a way to bring the activated button in front of the others via as?
View 8 RepliesAnother simple question here. I have 2 objects next to each other. On mouseover I have them enlarge. I would like to make it so that whatever object is being enlarged is brought to the front. Here is my code.
[Code]...
How can I make the obj change to front of another when the mouse roll over, and come back when out? I look for "setChildIndex with tween" but I don't found...
View 12 Repliesi have the below code, which is basically animating object across the screen, when roll-over happens it pauses the anim, and displays some information. Everything works fine, but when its paused, i wold like that current object to be 'on top' so other items run behind. I have looked at setChildIndex, but didn't have much luck.
[Code]...
I have a menu set up that has about 20 menu items in a circle. When you mouse over each item, a title comes up. The only problem is that because of the depth order, it's hidden behind the other menu items.
View 2 RepliesI'm trying to create an image class that I can reuse throughout a website I'm making.
When you click an image i want it to expand to fill the screen. When this happens obviously it will have to be at the top of the display list so that none of the other objects on the website are above it. The problem is that I want to be able to use this class throughout the website, even within containers that are beneath other objects so it seems impossible to simply bring it to the front easily?
Edit: Maybe when you click an image it would create a replica on top of the current image but above all the other objects on the main stage - then expand that one instead of the original image in the container? Theres got to be a better method though... I can't imagine this working too smoothly.
bring my correct uiloader/swf to the front/into focus when the relevant list item is triggered? This is my code at the moment
Code: Select allimport fl.containers.UILoader;
import fl.controls.List;
var list1:List = new List();[code]........
I have 3 movieclips in separate layers. inside each they have buttons.I want the mc i hover to move to the front. right now they overlap.see attached. the green cricle appears behind the other 2.
View 2 RepliesIf you go to the Portfolio page im trying to design 3 links that open up a mini section.. if you notice, each link stl has the other links overlaping the clip, because all links are on the same level..I have tried a couple of scripts that say they bring the clip to the front on rollover but have found nothing that works..
View 6 RepliesI have flash file, there is text, who loads from xml file and movie clip. i need, this movie clip, with all content bring to front, because, now it is behind text, but I don`t know how to do that..
View 4 RepliesI've tried several codes and none work or i'm just not doing it right i guess.See my SWF.The circles are movieclips with butttons inside. When you rollover the mc, the button extends. All the mc are in main scence in separate layers. I need to bring the mc i hover to the front.
View 8 RepliesI have made some images into animated buttons that enlarge on rollover, bring each layer to the front on rollover, I am working in CS3 with actionscript 2
View 2 Repliesi have 7 buttons inside an MC in a row next each other, when the mouse rollover each of it zooms 20%. Now the problem starts when the button you're hoving over is zoomed, the button next to it cuts into the image. in the order they where inserted I want the button you're zooming over to always display as the top layer - bring to front -.
i read of a code:
btn.swapDepths(1);
to change the depth of the movie clip
and:
trace(btn.getDepth());
to get the initial depth of the button putting it at a higher or lower depth than the other buttons will either place the button behind or in front of the other buttons ...play around with depths untill you figure it out.
I've a movieclip that contains two buttons. Buttons have a border appearing on roll over.The problem is that the border (which are fairly large highlights for both buttons) overlaps one of the button.What I want to do it that when one of the button is rolled over its index is set to a higher number than the other button and then back to normal upon roll out.
View 1 Replieshave a thing where i have a million drageable objects and to make it easy i made each one of them a movieclip with this on
on (press) {
startDrag ("");
}
[code].....
I have a wipe transition of a photo, and underneath that, another photo. So that when the MC is run, what the viewer sees is the underlying scene photo progressively (but quickly) being wiped over by the gradual revelation of a another pict. Now I want to programmatically move the underlying ("wiped over") layer to the top. The underlying scene photo occupies the lower layer. I've tried turning the wipe collection of mask and photo for one layer into one symbol, and the other pict scene into another symbol. But for the life of me I don't understand how the code for each goes into the layer tree. Or whether scoping out the symbols as I've postulated is even the right way to proceed.
The board doesn't allow for the ability to post the (f-) file, so there's no way I can ask if anyone can show me how to weave the code into the Timeline area. Also I'd like to direct the program to bring the lower layer to the top under certain conditions. There are no examples anywhere for how to programmatically do this for CS4. There was a CS3 way to do like this (this is a mouse rollover sample):
[Code]...
i've been receiving a ton of help here and love it but Im having a really bad time fixing this one part of an infographic im making. i need to do the following in a flash cs4/as2.0 file:
1.) make all boxes draggable on the stage
2.) on click/hover bring layer to the front.
var city_arr:Array = new Array(THIS CONTAINS A LIST OF ALL MY CITIES I AM USING AS MY NAMING CONVENTION);
[Code]...
How can I implement this? I tried to use: (this.numChildren - 1)But it doesn't work. I want to use this code because I have 8 boxes, each are 100px X 100px. You hover each box and they flip over but the "backside" of these cards are larger in both length and width than the front. When they flip over they overlap the neighbouring card. I'm looking for some sort of script so that I can tell each card to align itself above the other cards on the stage.
View 20 RepliesI have created a image gallery. There's a image scroller, when clicking an image it show large image on the same layer. I insert the image to this layer like this: addImage("image url", x, y, this). addImage is my own function witch works fine. In the begin of code I create movieclip (var controls:MovieClip;). When I'm inserting images to that, I want to bring the movieclip to front. Because that large image is added after the controls, it will be on the top.
View 6 RepliesI've developed a website and on the home page there is a series of css/ javascript dropdown hyperlinks. Some of these hyperlinks display a popup menu of further links on mousemover. Immediately below the hyperlinks is a small flash movie.
The problem is, when you mouseover the links and it displays the popup links, the flash movie appears OVER the drop links.
Is there a way I can either send the flash movie to the back using some kind of 'send to back' option like there is in dreamweaver? Surely I don't have to restructure my page to allow for this?
I'm having reel trouble trying to bring a movieclip to the front using setChildIndex. I have 3 movieclips that are being loaded into a movieclip that sits on the stage. I'm using:
[Code]...
Is it possible to bring a div in front of a flash movie that is in full screen?How can I do this if it's possible? I want to make a little box in my site and put some links in it and position it on top of a flash movie that is playing in my site so the user can have shortcuts there.I don't want to put the links inside the flash animation :D
View 1 RepliesIve seen some code, but I haven't understood it. I am trying to do a website with images which are at the same time buttons to a slideshow of the pictures. I just found out that my problem is that some of the images are crossing each other very badly when you move your mouse over them. (the pictures when you go over them with your mouse turn colored and have white borders on them, but as some images have the same border its not displaying it right.)
I must make them movieclips and then swap depths I just wonder if there is a way without making them movieclips..
I have thumbnails that load from an XML file, the thumbs are positioned horizontally across a containing MC.
They are spaced so they overlap, and I want the thumb that is MOUSE_OVER to come to the top
ActionScript Code:
var thumbCon:MovieClip = new MovieClip();
var leftGutter:Number=30;
[Code]....
I have 114 drag movie clips (one on other, overlapping movie) on the same frame. By clicking a button (on the same frame) 7 movie clips (randomize) should be visible and active to drag. Those movies that are in front are active and I can drag them, the other are visible but can not be drawn.[code]...
View 3 Replieshow to bring a button to the front when it is rolled over. I have a scene with six buttons. When each button is rolled over the roll over state contains a movie that runs and animation that 'grows' the button to reveal other information. The problem I have is the 'depth' each of these buttons are on. The top button works fine and goes over the other buttons, but the bottom level button expands below all the other buttons. If you look at the attached screen grabs you will see what I mean. What is the actionscript 3.0 I need to use and where and how do I apply it?
View 9 Replies