I have a cs3 project that works fine that saves an image out and sends back to a html page.We updated the project to cs5 and now it does not redirect back to the right URL. Only differences are in the below script. I been lookingat this for days without getting any where so would like some fresh eyes to have a look to see if there is glaring issues with the code.[code]
View 1 Replieswhen I click continue shopping paypal sends me back to the swf file and not the html page is their a variable or something on paypal that directs it to send it to the html page instead
View 0 RepliesBasically I would like to display what my server side script sends back after I submit my form. The results need to be displayed in my scroller box. I started to write it out but I am stuck.
[Code]...
I had posted this in the PHP section but think it may be more relevant in Flash as have'nt had any replies yet..I have been asked to create a photo canvas website that allows users to upload an image, then apply several effects such as re-sizing/cropping/desaturate, then viewing the updated image on a generic wall and going to check out to buy the canvas.I am pretty new to web developing/designing, i am confident with html,css and actionscript to an extent, but have only used small parts of php before.My biggest worry is how to go between html > php >flash >back to html again.From what i understand i need to create the following functions:
1. Create a general html website which will store the upload form and flash photo editor swf on, when the user first access's the site i start the php session...
2. The user then uploads there image to the server using a simple php upload form which will store the file and create a unique named file also on the server...
3. The flash editor swf will then load up on the html page. Inside the actionscript of the swf i will tell flash to continue with the php session by calling it again and call users image on the server with the 'file reference' command. The editing functions such as cropping, canvas size will all have variables to mark what the user has chosen and these varaibles will get ent back to the html page using php to keep track of them for the checkout process...
4. Once the editing has finished the user will click 'finish' in the swf taking them to the php shopping basket/checkout which will call the variables sent in flash to determine final cost depending on what effects chosen.
Is the above correct and more importantly is it possible? The main part i am struggling to get my head around is editing in flash (say changing the uploaded image to 20 x 26) and then saving this back to the server and sending the new settings back into the html/php page.Is this all possible without using database and tables such as MySql?
Unde linux, the foreign keys such as... do not seem to work with this code:URL...The output is wrong under Linux, but Windows is Ok.the output of foreign keys such as ΓΌ with Linux looks same here, totally broken, two chars appear: URL...
View 1 RepliesI got a dwg file converted into swf file. Now I want this swf file to embed in html page. No issue with that. The tricky part for me is to let the user select the entites of the file such as line/circle as one might select in autocad. After entity selection the swf file (by any means) pass the selected entity information back to the html page ( to the javascript function).
View 5 RepliesI have a Flash Form, which sends Variables to a PHP page through getURL - Post method.
My requirement is that : i need to redisplay the Form variables (name, email and so on) back in Flash as a confirmation after the data has been entered into the database in the PHP page.
I can put 10000 x 20000 image in flash overlapping the stage, only part of the image which cover the stage will appear.I want to achieve similar effect in HTML.I have an image 600 x 3000 and my browser body width is like 1280px.I want only 1280px width of the image to appear on the HTML page and the rest of the image will be hidden.
View 2 RepliesI have a page that needs simple image editing within the page. It can be either in flash or Java. Are there any open source tools that you can recommend? I am looking for a flash or Java tool that can do the following:
Cropping
Resizing
Nothing else required but simple features like this will be a plus.
I have a Flash website with 3 interfaces( 3 frames with movie clips inside). they have a button that goes to different loaded .html page(text). But once the back button is pushed on the web browser, it always goes back to the first frame instead of the actual last page, which might have been frame 2 or 3.
View 1 Repliesi want to know how we can make back button in flash to go back to page same like browser back button.
View 1 RepliesIn my apps, i would like to:
1)have a pop-up menu when a button is touched, then ok to close but still in the same page as it is
2)invoke the popup menu by using samsung's "MENU keycode",then ok to return the same page as it is
3)having the user to swipe 5 images to view them, left image as 1st and 5th image as last image with smooth transitions
4)and also using the "BACK keycode" to go back to previous page
I have just established a menu based-image in flash in the main html page. Also I do have a second page has details on each option of the menu of the main page. I am trying to whenever I click on any option of the menu in the main page; this should take me to the specific section in the second page describing this option.
View 3 RepliesI have created a small image gallery for use in a CBT Program.What I am looking to do is, each image in the slide when clicked needs to go to a separate html page.I currently have it working as far as being able to execute a single External Call to go to a HTML Page, but it is working for the entire gallery not individual pictures.I am thinking of separating the way the MC are loading into the container, then tying External Calls Specific to the individual clips.
below is the current code.
--------------
import mx.transitions.Tween;
import mx.transitions.easing.*;[code].....
I'm using mx 2004 and php, mysql. I have flash banner in a hybrid webpage that I would like to change the image and some text each time user selects a new category in the html page. There are quite a few categories. What is the best way to do this and how would I go about doing it. is there a script sample or tutorial that I could modify?
View 4 RepliesI have a movie clip that loads in the main timeline, when i click on any of my buttons theres a quick flash of the main page. Im loading my movies on level 1 so i guess my question is, how do i get rid of the movie on the main time line?
View 2 RepliesI have made a Flasch website with long pages. I look for a possibility to jump from the bottom of the page to the top of the next page (is in the next frame).
When I make a button "preview frame" on the bottom of the page, the page change into the next page, but at the bottum of that page.
Is there a way for Flash to remember which frame it's on and what it's doing when you come back to a page or refresh a page?
View 9 RepliesI'm looking to create a popup which opens a "template" html page with an image placeholder. This way you should be able to send a variable from the swf and open up the same html page each time but the image would change as you change the variable from the flash button.
Basically I have flash page containing various thumbnails and when clicked, each one will open a larger version, but I dont want to make a html page for each one so rather 'send' the filename to the html page if this is possible?
[URL]
I was given this:
<html>
<head>
<title>Image viewer</title>
<script>
function loader(){
[code]....
I just basically want the swf file to decide which jpeg is to be loaded into the popup.html.
i want to rotate 3D an Image called img1 in Flex. I want to rotate it around y axis 180 degree. I can do this by using 3D effect already built in Flex but i want to do a bit more different. I want during rotating, there's another image called img2 appear on back of img1 (in default case, the image appear on the back is img1) and when rotating finish, the image will be img2.
View 2 RepliesI have a flash header for an html site that is about a megabyte and obviously needs a preloader. Unfortunately it won't work to have the preloader loading at the top while the rest of the html below is visible β€” it will end up looking like the top navigation is cut off, as the top 10 pixels of the nav bar is actually in the swf header (fully loaded it will look contiguous)Is there a way to preload it in one html page and then once it's loaded into the cache automatically jump to the page with the big swf?
View 1 RepliesLet me ask how to program an html page to move to a new web page on user's clicking an item of an embedded flash movie? But , in detail, I actually want to do a little different thing. I want that the parent html page remains there ,instead I want a child html frame has a new page after user's clicking the list item of the embedded flash movie.
View 2 RepliesI have a site where all the pages have a common SWF embedded at the top (Nav and banner), but the rest of the page is HTML.Everything is working fine, but I'm finding the 'independence' between the HTML and Flash is making for some sloppy transitions from page to page.I was expecting the SWF to be delayed, at least for the first page visit(and I have a preload routine inside the swf to make it's delay and appearance a bit more visually pleasant), but was surprised to sometimes find the SWF appearing and playing while the HTML content was delayed (resulting in a SWF floating in black).What I'm wondering is if there's a way I can do some sort of preload on my index page.BUT, not the standard one that I'm sure everyone would suggest (like the javascript image 'preload', or the newer 'css visibility' preload trick). The problem with the standard one is that it doesn't check to see if everything is loaded.What I'm after is a routine on my index page that invisibly loads some of the elements from my inner pages (common swf, maybe some of the images) and WAITS until it's done before moving to the inner pages (displaying the company logo and/or a load status in the meantime).Many people would suggest a preloader inside the common SWF on my inner pages (which I have), but the problem with that on its own is that it doesn't stop the HTML from displaying.
I'm trying to figure out a way to do a preloader (like those in a SWF, which loops until everything is loaded) that controls both the SWF AND the HTML.Recently, I found that you can use one swf to preload another, which would be a potential solution, as I could make an SWF on the index page whose sole purpose is to load (invisibly) the common SWF, displaying the load status and then loading an inner html page once it's done.Problem is, I have bee having trouble finding the coding for that, as most searches for preloaders end up being about standard preloaders, where it's monitoring the same SWF that the code is on, as opposed to controlling a second, external SWF.Can someone point me to or provide me with the proper coding/procedure for a preloader that controlls a second external swf or give me a better solution?
one?
I want to build function on my site where I click on the link, and a new page (background opacity maybe at like 50%) - which consists of a video in the center and a link or two - floats on top of the already existing html page. I've seen this done a few times and I think it's a really cool function.
View 1 RepliesI've been trying to recreate the effect on this page [URL] change the height of the page and notice how it's content moves.
how you make a .swf placed onto a html page be as wide as the page, and let the flash file know how wide it is being displayed so the content does not stretch out
I have a html/flash site now, [URL]. i access email from my site itself by giving the userid and pwd text box which i copied from the actual website hosting my email access. i copied the entire <form...></form> tag to my page and thus was able to put the name and pwd in my home page only and access the email in a separate window. now i have redesigned my webpage using only flash. i would like to know how i can implement the same using flash. as i have not much experience using action scripting i am a bit stuck about how you pass the hidden form variables. the below is the the exact form syntax:
[Code]...
I need to allow users to preview audio files for purchasing. I have CF pages that return records form a SQL database. Each record contains the same swf file however, each swf file points to a different mp3 for previews of different audio examples. So far, everything is working fine. My problem is that I need to be able to stop the sound from one swf when I click to play a second swf .The only solutions I see in Flash forums deal with loaded swf files. These are not loaded files they are separate files within a page. The question is: How do control one swf from another swf in the same page.The following items have not worked: soundChannel.stop();,soundMixer.stopAll()
View 2 Replieswhen you go to the home.html page an animation will play from start and then stop at the end of it. However, for all other pages i.e contact.html aboutus.html we need the animation to skip to the end straight away and not to play the whole animation through. I was thinking this would be controlled by a variable or some kind of external text file ect. Basically in the first frame the actionscript needs to basically say
"if this html page is aboutus.html then go to the last frame and stop" and with the index page it would say "if this html page is index.html then keep playing"
I want to set link of another html page on flash file.
View 1 RepliesI would like to ask when swf object rendering at the html page? Is it rendered only it's visible? If swf at the page bottom that is not visible, will swf be rendered when I scroll down? The problem is that swf object raises some events when it's rendered and I would like to force rendering even if swf object is not visible.
View 1 Replies