Actionscript 3.0 :: Dynamic Buttons Fail To Work?
Feb 21, 2010
So I have made 7 movieclips on the stage that will act as buttons. I gave them all the instance name "port_BTN_0", port_BTN_1", ..., port_BTN_7".Then I will create movieclips as a child of those buttons that will act like imageholders. When the user rolls over the buttons, they will fade away. And here in the last command, it seems to fail.
Here is my code.
Code: Select allvar n:int = 5
for (var j:int = 0; j<n; j++) {
[code]....
View 1 Replies
Similar Posts:
Jun 23, 2010
I"m a bit confused because FlexUnith 4's behavior. When I use fail() in try-catch body fail method is just ignored.
[Code]....
I suppose this one should fail as there is no way around it, but it succeeds and turns green. Whatam I doing wrong? When i put fail() before try-catch block it fails as it is suposed to. BTW using Flash builder 4.
View 1 Replies
May 15, 2010
I try to make a dynamicly loaded menu.I load four buttons to the stage and applie code to each of the buttons. But it's only the last button loaded, that responds to onRollOver/onRollOut If I roll over the other buttons it's the last buttons that reacts all the time.I just can't see what's wrong. Here's the code:
Code:
buttonCount = 4;
for (var i:Number = 0; i<buttonCount; i++) {
btnRef = "button"+i;
[code]....
View 1 Replies
Apr 22, 2011
i want do live dynamic streaming for FMS. i have refer [URL]. But the sample player show blank.
i using Adobe Flash Media Live Encoder 3.2, Adobe Flash Media interactive Server 3.5.3 and sample file "live_dynstream_dvr.zip".
1. I setting up my FMLE and set FMS url and stream name
2. I monitor connection in fms_console.htm
3. I run DVRController
4. i configure and play the video with livedvr
but my video player is show blank
5. in my fms_console.htm show 3 connection
View 2 Replies
Aug 7, 2009
I have a movie clip with 15 frames. Each frame has buttons on it (mc's)... I was going to put the actions on the main timeline/stage and navigate within the MC from the main timeline. Is that possible? I can get the buttons on the first frame of the MC to work, but I can't seem to figure out how to target/make the buttons on the other frames work? I was thinking I could identify the path of the MC with the frame labels, but that doesn't seem to work. like: _root.RMChanger.(frame label).buttonOnFrame = function
I have to move a text box in and out over the MC backgrounds on the main stage... which is why I was thinking to do it this way? I've been switching back and forth bwtween AS2.0 and 3.0
View 9 Replies
Jul 8, 2005
I am having trouble with a job I am doing at the moment which has an mc with buttons within it. I want it so that when I roll over the mc it tweens from a small version to a larger version, and on this mc there are some buttons. At the moment I can get the mc to move but the buttons remain inactive and also the rollover states on the buttons don't work. I have attached a simpler version of what I am trying to do to this post.
View 3 Replies
Dec 4, 2009
I'm having problems with the flash buttons on the flash website i made for a client. or some reason the buttons in the top and bottom menu work on some people's computers but on some they don't. I don't know what to do, i had this code for all the buttons,
on (release) {
getURL("http://legaldepartment.ca/","_self");
}
and they worked on my computer but on others the buttons didn't work at all so i added this code to each button also
on(press) {
_root.getURL("http://legaldepartment.ca/","self");
}
and they still work on my computer and some other people's computers but still some they don't work on some people's computers.
View 2 Replies
Jun 1, 2011
I am using Flash CS4 with actionscript 2 to create an interacitve portfolio.I have 2 text buttons that work when I test them with "enable simple buttons." When I publish to IE these buttons won't work. I have created over 50 buttons using the same methods, they all work.
View 8 Replies
Mar 19, 2012
I am trying to defeat my psychological block with dynamically loaded fonts in AS3, and I have an annoying problem. I am creating a clock with a textfield and I am loading fonts from a SWF library: the available classes/linkages are "Arial", "ArialBold", "MyriadPro", "MyriadProBold" and "Verdana".This is the line where I get the class from the SWF, and it extracts the class correctly
Code:
clock = new Clock( { fontClass: assetsLoader.getFontClass("skin", "Arial") } );
The constructor...
[code]......
View 7 Replies
Jun 7, 2006
I can't get the code to "know" which of the dynamic thumbnails has been clicked (by "know", I mean return an index value, say 0 through 7 if there are 8 projects, that I can use to access that particular project in the array of 8 projects in the rest of the code)... So if the third movieclip thumbnail were clicked, I'd like "2" to come up somehow... I've tried this code, which is kind of lame, I know, based off of the idea of each of the thumbnail movieclips' names ending in their index number:
Code:
//"this" is the button that was pressed; would return a string ending in
//thumberMC_<number of whichever movieclip thumb was clicked>
var: testString:String = this;
[code]....
Lastly, there's a dynamic textfield I'm trying to create that never shows up for some reason. Again, you could see in the FLA (in the "createDrawer" function around line 424).
View 9 Replies
Mar 21, 2009
I am using buttons with a dynamic textfield and a function to set the label for various different buttons:
public function setLabel(thisLabel:String) {
visibleLabel.text = thisLabel;
}
I set a label for each button:
btn_mc.button1.setLabel("2 | Al Sabkha Bus Station - Al Qusais Police Housing");
I have a dynamic textfield ... myText ... which I would like to use as a page title ... so once the button has been clicked, the dynamic textfield should update with the label of the button clicked.
View 1 Replies
Dec 10, 2009
I'm trying to create an informative flash program on Mt. St. Helens about the dust cloud it created when it errupted. I have everything ready to go including the buttons and the pages the screen or next image it should take you to. I'm just stuck on how I get the buttons to actually take you to the next frame.
View 24 Replies
Feb 4, 2010
if i'm on the home page of this flash site, a button on the nav menu loads the correct scene the first time it's clicked, but if you nav to another scene and click the first one agin to return to it, nothing happens. why would a button behave one way on a scene and another way on another scene?
View 1 Replies
Apr 16, 2009
I've used flash like twice in my life, but I think I know how to make a button. I'm working on my artists portfolio online and I'm making it in flash. Basically it has buttons which link to photos and videos. There are 5 videos and 5 photographs. Now the problem is when you click on a button and watch a video buttons 1-3 of photos don't work. But the 4 and 5 buttons for photos work. It seems to only happen after you watch a video. The same actionscript is on all of them GotoandStop is the command I'm using for the photos and GotoandPlay for the videos.
View 3 Replies
Oct 14, 2011
All I want to do is add text from my string to dynamic text field when I click dynamic buttons. What should the as code be for this? Here is my code. Right now I just have the click returning another shape.
[Code]....
View 2 Replies
Dec 10, 2008
I had all of my code working, then I moved all of my main movie timeline into a movie clip (body_mc)Main movie now has 1 frame.My body_mc has a navigation menu, one button is portfolio_bttn which takes you to that frame label. It persists through all frames of body_mc. This button works fine.I seem to have everything working except 4 buttons on the first frame of body_mc. They should all perform exactly the same function as portfolio_bttn. They exist only in frame 1.They work the first time you click one (any one).Navigate back to frame one of body_mc and all 4 buttons will no longer work. What am I doing wrong??here is my code which is in frame 1 of the main timeline
Code:
body_mc.portfolio_bttn.addEventListener(MouseEvent.CLICK, clickPortfolio);
function clickPortfolio(event:MouseEvent):void {
[code].....
View 19 Replies
Jun 1, 2009
[URL] the above site has small animated buttons that run through a sequence continuously until the user positions their mouse over the button then it launches into a 2nd sequence (all in the same movieclip). inside each movieclip there is the entire sequence and the first half is the bit that runs continuously - the second half is the mouse 'overstate'. the top layer has an invisible button and the action script:
[Code]...
View 3 Replies
Dec 16, 2009
I am a new comer to flash and I have been teaching myself actionscript 2.0 and I am now trying to move to action script 3.0 this seems a dumb question but for the life of me i can't figure out how to make my buttons work.i am trying to have the user click at button that connects to a movie clips and plays the movie, the movie stops then goes to the next frame of animation.
View 1 Replies
Jan 7, 2010
I am new to Flash and am having an issue with a project I'm working on. I have buttons that are in frame 1-150. I wrote the code in frame 1, but expanded the box to frame 150 so they will work. However latter in the project I want to be able to gotoAndStop frame 150, but when I do the buttons no longer work. I changed it to gotoAndStop frame 1 and they work. Can you not link to buttons in the middle of the "timeline".
View 1 Replies
Oct 24, 2008
I'm trying to convert an AS2 file over to AS3 and I can't get the buttons to work. They do not want to gotoAndStop at certain frames in specific scenes. In the following code, if you click on a button it works fine, but when you attemp to change to a new Scene, it breaks and both buttons won't work thereafter. I've tried everything for almost a day now and cannot get this to work and cannot find any reference to the problem. Is AS3 buttons not able to go to a new scene as it suggests in the Help files?:
View 17 Replies
Apr 1, 2010
i'm just learning Flash at a local college and my instruction is not being very helpful, so i'm hoping someone can help me. I need to insert a "start" button that will start the movie. I have the button on a layer called "startButton". I inserted another layer and called it "stopMovie" - this is where I add a keyframe on the 1st from and the last frame and then add a actionscript to stopmovie on both frames.
The problem I'm having is when I select the 1st frame of the layer where the button is localed, I go to the actionscript window/global fuction/timeline and then I want to select "play" but the system has it grayed out so I can't select it. My only option is "goto". But that doesn't work. All I want the funtion to do is start playing when I click on the start button.
View 1 Replies
Aug 11, 2009
I have a cascading/collapse flash menu.There are about 7 layers, each one of them a different page that slides and covers the other layers.for some reason, all the buttons on the bottom layer (layer 1 for instance) can be clicked on even when the 6 other layers are ontop of it with their own links and buttons. How can I make it so all my buttons don't shine through all the other layers. I can't slide the layer away to get ride of the buttons because it is still partially viewed when the other layers are ontop of it. I can't figure out why the buttons in layer one can be clicked in layer 2 when its on top of layer 1, or layer 3,4,5,6,7 when they are on top of layer 1-i assumed these layers would block out the buttons and links in the first layer(which is on the way bottom)
View 2 Replies
Feb 19, 2010
I'm designing a website for a Reiki/Spiritual advisor thingymebob and I have a menu on the left of my page of buttons and when I click a button it displays the contents of the button on the stage. Easy enough, so to speak, but the code I have written should send the viewer to a certain frame in the timeline where the tween begins.
When I play the swf and click the home button it works perfectly on the first page and if I go down the menu and click every other button in order they too all work fine, but as soon as I start clicking any other button randomly there is no tween effect and it seems to send me to the wrong page(!) plus straight to the clear text on the stage without any fading in tween. As though it has just gone to the last frame of the tween.
Here's the code below. I've asked the spiritual advisor for guidance and he sent me here, so please prove him right - ha ha!
stop();
myHome.addEventListener(MouseEvent.MOUSE_DOWN,
mouseDownHandler2);
function mouseDownHandler2(event:MouseEvent):void {
gotoAndPlay(281);
[code]....
View 1 Replies
May 8, 2009
Attached is an FLA with an image that moves onto the stage. There are 5 button MCs which are supposed to move the image left/right. Works great, only if the SWF is published for Version 6. However, published as a version 8 swf, the buttons no longer create motion. On a different thread, somebody published it as a version 8 and 9 SWF and said the buttons worked perfectly..FYI, clicking into the , imageStrip_mc is an Actions layer, as well as the Actions on the root timeline.I am using Mac OS X Flash CS 3 - v 9.0 - using ActionScript 2
View 2 Replies
Jun 16, 2009
stop();
reel_btn.addEventListener.(MouseEvent.CLICK, onReelClick);
samples_btn.addEventListener.(MouseEvent.CLICK, onSamplesClick);
about_btn.addEventListener.(MouseEvent.CLICK, onAboutClick);
contact_btn.addEventListener.(MouseEvent.CLICK, onContactClick);
function onReelClick(e:MouseEvent):void {
[Code] .....
This is the code I'm running, everything to the best of my knowledge is in order, however when I run the SWF none of the button's work, I'm not getting any error messages.
View 6 Replies
Jun 28, 2009
I have my main SWF into which I want to load an external swf...When I've tried using the following code...
var light:Loader = new Loader();
light.load(new URLRequest("light.swf"));
addChildAt(light, 1);
The SWF loads but the buttons inside it do not show. How do I load the swf and have the buttons inside it work? Anything inside of the external swf that is a movie clip works, but I'd like to be able to keep the up/down/over and hit features of the button.
View 2 Replies
Jul 7, 2009
Basically a button in my .swf works fine, but when put in any browser it doesnt work. The button is in the flag in the top left and is a link to my advertising agency.
This is the .swf - [URL] and this is it in a browser - [URL]My code to embed is :
<object type="application/x-shockwave-flash" allowScriptAccess="always" allowNetworking="all" height="700" width="900" align="middle" data="http://www.littlekingdesign.co.uk/rico/ricobanner2.swf"> <param name="allowNetworking" value="all" /> <param name="movie"
[Code].....
View 1 Replies
Nov 29, 2009
I have a 3 screen project and there are two buttons on each screen that have to be able to enable the user to jump to the appropriate screens when clicked on. I am totally new to flash and I have tried off and on for a couple weeks to figure this out in various books and online. I just can't figure out what I'm doing wrong.
View 1 Replies
Dec 6, 2009
Im very new to flash and a colleague provided me with perfectly functioning swf presentation. I opened it with flash to make some minor mods and now when i save the pause/play buttons he had put on the presentation no longer work no longer work.
View 1 Replies
Jun 29, 2010
I have a couple buttons that work outside of the ScrollPane but dont work within it. This is my exact code, how do I get them to work?
scrollPane.source = myContent;
scrollPane.setSize(173,500);
K1Button.addEventListener(MouseEvent.CLICK, playVid);
function playVid(e:MouseEvent):void{
myVideoPlayer2.myFLV2.source = "video/K.mp4";
myVideoPlayer2.myFLV2.play();
[Code] .....
View 1 Replies
