We have an application that works no problems on our server with FMS in test mode. As soon as we enter our FMS license key we get this error: "application is not a valid signed application loading access denied".We removed the license key and it works again, but with user limits obviously, so this is not an acceptable fix.
View 5 RepliesI've already enabled the FMIS: Please enter your Flash Media Server 3.5.1 serial number.xxxxxx Congratulations. You have enabled theAdobe Flash Media Interactive Server! But my own application still fails :
[Code]....
Is there any application which can relay another application on Flash Media server? For exmaple I have a "live" application on the server. I want another application, "liverelay" which can basically relay what is coming on the "live" application. Is it possible? If so how can I implement it? Looking forward to a response.
View 12 RepliesWhen I unload an application say live for example. And a user loads fmle and goes to load the liveapplication it starts it automatically. How can I prevent this. I want to be able to prevent it from loadingautomatically. When a user reaches their bandwidth limit I want to make sure they can't just use the
View 2 RepliesI've had FMS running on my local machine for a while and have had a little experience writing FMS apps, but I've just tried recording audio for the first time using the standard vod application and I keep getting a "Write access denied for stream" error. My AS3 code is copied and pasted for various examples and am confident that it works.
I'm running Windows XP service pack 3 & FMIS 3.5.
I've had a look at the vod/media directory and under windows->properties the read-only attribute is ticked. Every time I un-tick this it reverts back to being ticked. I've googled this and MS say that most programs ignore the read-only attribute and that it only really applied to files. I've also tried the MS fix for setting the read-only attribute via cmd and still no joy (doesn't fix read-only attribute or FMS recording the audio after setting via cmd).
I've also tried our dev server install of FMS (running under linux) and am getting the same results.
Here's my AS3 code...
private function initApp(event:Event):void
{
removeEventListener(Event.ADDED_TO_STAGE,initApp);
[Code].....
I'm running Flash Media Streaming Server and have only been serving VOD up until now. I had my network administrator open up port 1935 to the outside world during the setup process and now I can't remember if that was actually required for streaming VOD to clients. Most documentation I've read says that this port should be open, but I seem to recall reading something at one point that suggested it wasn't necessary.
I've just started messing around with publishing live streams using Flash Media Live Encoder to the Flash Media Streaming Server. I have that working without issue but was surprised to find that no authentication is required before a client running the live encoder can publish a stream to the Flash Media Streaming Server. An authentication module is available however it only works with Flash Media Interactive Server and Flash Media Development Server.
If I leave port 1935 open to the outside world, there would be nothing to stop anybody anywhere from streaming video via my server. Anyone else running a default install of Flash Media Streaming Server and with port 1935 open to the outside should see that this is true of their setup as well. I'm wondering if I can safely close port 1935 without limiting the functionality of the server or if there's some way I can require authentication prior to publishing a live stream even though I'm not on the four-and-a-half-times-more-expensive edition of the product.
I nedd to create a self signed certificate for my desktop app. What do I need to enter in these fields?
Organization unit
Organization name
Does Organization means my agency's name?
I have a demo application using Adobe Air that accesses my own SSL web service that uses a self-signed certificate. In .NET clients, I can explicitly handle (and ignore) certificate warnings and suppress them via the ServicePointManager.ServerCertificateValidationCallback. I've examined the URLRequest and URLLoader classes but haven't found anything.
View 1 RepliesDear community, i am searching for 6 days for a solution but i couldnt find. I installed the trial version of Adobe Media Server 4.5. I am trying to host live stream and it is working without error. but when i activate protection (PHDS), server gives en error code: 20...
Here is the server log...
After i could take the Live HDS, i made these settings as described at [url]
My application.xml and event.xml files are:
I have configured FMS on Amazon EC2 I am trying to capture data from my webcam and push it to the server.For storing the webcam i created a new folder but as it is recommended in other forums "You need to replace the signed Live application (main.far) with main.asc in[FMS-Install-Dir]/samples/applications/live/ ;(For more Info: refer to documentations & live/readme.txt) "I am not able to locate samples folder from where i can get my main.asc file
View 4 RepliesThe server on which FMS was running crashed due to a power failure. FMS is set to start, and it restarted with the server.Unfortunately it restarted with no applications loaded, including the application, which we need to run continuously.Is there some way to ensure that the server always starts with a particular application loaded? The only way I could find to load it was through the systems console.
View 1 RepliesI have configured FMS 4.0 to do RTMPS on port 443. To test it, I created a self-signed certificate and then imported the certificate as an authority in my browser (Firefox). I don't want to go and get a real certificate until I can verify that FMS is able to do what I want it to.I included the path to the certificate and the private key in Adaptor.xml in <install dir>/conf/_defaultRoot_/That's the only file I have modified.[code]In the NET_STATUS handler I always get the following error: NetConnection.Connect.CertificateUntrustedSigner.
View 1 RepliesI am trying to make video two way chat application through FMS streaming in AS3.0.Its working fine with Mozilla but not working in Internet Explorer.
View 3 RepliesI have created a folder inside Flash Streaming Server/conf/_defaultRoot_/ called Test with some FLV in the folder. When I log into the console its shows the server and _defaultHost_ and Test but says You are not logged into:Test; make a seperate connection. Does this mean it wants a new application created for Test? How do I fix this?
View 5 RepliesThe server hosting our FMS does not have space to adequately store the media files over time. I have since connected a 500GB external drive to the server. This drive is mapped as the Z drive. I am not exactly sure how I need to edit my application.xml for all http requests to point to this external drive. Below is a small sample of the file. How would I correctly edit this file? Would I just add a line that says <Streams>/;${Z:VOD_DIR}</Streams> ? Do I need to delete either of the below lines?
- <Application>- <StreamManager>- <VirtualDirectory>- <!-- Specifies application specific virtual directory mapping for recorded streams. --> <Streams>/;${VOD_COMMON_DIR}</Streams> <Streams>/;${VOD_DIR}</Streams> </VirtualDirectory> </StreamManager>
[code].....
I am trying to playback recorded streams from a Flash Media Interactive Server using the VideoPlayer component in Flex 4/Flash Builder 4.If the stream is located in the serverpath>/ streams/vod/_definst_ directory then I can get to it by setting the 'source' parameter of the VideoPlayer to [code]What I can't get to work is when I have a stream recorded to an instance within an application directory.So if the application is "app1' and the instance name is "inst1" it would be literally located in <serverpath>/ app1/ streams/ inst1 directory. Setting the source parameter to this "<server>/ app1/ inst1/ streamname" does not work.It seams to be ignoring the 'inst1' part of the path because the server side log shows '_definst_' as the instance name being run.I know this is in part a Flex 4 question, but manually writing a video player works. I would just like to get the Flex 4 VideoPlayer component to play the video.
View 2 RepliesI have an FMS Clustered in Edge-Origin configuration. Can I have different Origins for different applications but the same edges?.I have multiple edges forwarding the requests to the Origins based on the application name?[code]And if its possible, can someone advice the advantageous of having different Origins for different Applications?
View 6 RepliesWhen a client connects to an application (nc.connect) this is catched at server side using application.onConnect; so, when the client asks for a stream (ns.play) ... does this have some correspondence at server side ? Can we catch this event in some way?Or, seen from another point of view: is there any way, from within an application, to know what stream(s) the application is serving ? I mean, if we want the list of connected clients we have the application.clients array; is there any correspondence from streams ?
View 2 RepliesI'm trying to record a video to the default FMS vod application with a flash movie, i'm getting this error: "NetStream.Record.NoAccess". I think the problem is not in my code, but just to make it sure, here is it:
var mycam:Camera = Camera.getCamera();
mycam.setMode(320,240,25);
var myvid:Video = new Video(mycam.width,mycam.height);
[code]...
i checked and the connection to the server is fine.if i use live streaming, than it's fine (of course in this case i use the live application).It's maybe a file system related problem. I use windows 7, and given all permissions for all the users.. still dont working.
we are hopping to develop a text chat by flash sites.
View 3 RepliesI am following this: [URL]. And parsing the logs to get the stats of applications is hard if theres heavy traffic its hard to get everything to parse right. Would it be easier to import all the stats into mysql db once an hour that way its easier to work with?
View 1 RepliesI am wondering what values should I put in the Process tag of Application.xml considering my application. I've done some studies but I am still unsure and would like some expert opinion To help you help me : I have a video chat application that comes with a contact list, so think skype on the web.
[Code]...
I set a RollerOver because sometimes RTMFP crashes on my server, and by putting the RollOver it seems to help, by re-newing the core process. However when clients are connected before the rollover, then they will not see their friends going online after the rollover which sucks.
We want to develop a broadcasting application, there would be a main broadcaster on video, with a lot of chatters. There would also be some chatters going on webcam (6 max). I'm still checking out NetGroups, IP Multicast, RTMFP Multicast, Fusion etc. but I am still lost. I also want to make sure that people who can't support RTMFP can be a part of the program by using RTMP, if that's possible right now to combine RTMP/RTMFP in such a big broadcasting application.
View 1 RepliesI am working on creating an FMS application which does an authentication on server side too. I hvae gone through a number of tutorials and the developer guide but not able to find a correct way to start working on this. I have been able to create a sample application which authenticates few parameters on the server side using the main.asc file with code for authentication on onConnect method. My main doubt right now is how do I set up an application which streams videos depending on this authentication. I am confused on how to setup a new application, how to setup the application.XML, which folder to store the files etc. Can some one guide me on this or give me reference to an application which actually does. A sample/tutorial which actually setups a custom FMS application for simple video streaming from scratch step-by-step would also do.
View 3 RepliesI did an application here to record the user's webcam and store an .FLV at my applications folder. That's ok. But I want to retrive this .FLV using HTTP mode, to load the .FLV progressively, not by streaming. Got it? For example, if I record a user webcam called "myWebcam": myVideoClass.load("[URL]");
Using http (progressively), not rtmpt (streaming). There is some way to do that? Or to move the file from applications folder to webroot?
I have few queries on Flash Media Server:
My Requirements 1. First requirement is to broadcast a live event through a website. So I need to develop an application to capture the event using a cam (I don't want to use Media Encoder) and I need to create a player for the web site.2. Second requirement is, in a webpage need to display the same live streaming event, also need to display another 8 live videos (which capture the webcam of 8 different users). Basically can I do multiple streaming how can I handle
Questions:a. Can I use Flash Media Server to meet the above requirements?b. I have a dedicated server for FMS and I have webhost for hosting the website. Since FMS and the web hosting are different server, will FMS communicate with the hosting server?c. What is the minimum config for the hosting server? Is it better to go for some Unmetered Servers?
I trying to make a application for multiple videoconferencing, in which more than one peaple can join. During my analysis I have got one issue: Suppose four users are making a conference meeting and all of them are publishing their respective videos. All the video are displayed on on each screen. But due to limited connection and bandwidth I am making connection or viewing each publisher one at a time in every 15 sec, which make still image. but I want to clear the video of the respective person who has either logged out or stop publishing. I have tried the netstream event i.e netstream.unPublishNotify but it works only when I have made connection for viewing. But sometimes it happens that I have no connection for viewing for that perticular person as per the timer. so I want to know who is publishing video at the time of making connection for that perticular view. How could it be possible to know whether the live stream is coming or not at the time of view.
View 1 RepliesI have a basic video on demand app running on Flash Media Interactive 3.5. I've noticed that in our flowplayer page, in order to view the contents I have to set the netconnectionurl to be the address to the app, and then the file name url needs to contain the rest of the path.
For Example:
NetConnectionURL: rtmp://myserver.edu/appname/
Url: path/to/file/many/folders/deep/video.mp4
However - I have accessed the same file from a different server using the following:
NetConnectionURL: rtmp://myserver.edu/appname/path/to/file/many/folders/deep/
Url: video.mp4
What type of VOD application or settings need to be configure to allow the later example to work?
I have a FMS 3.5 running a VOD service (on-line training based on videos) on what I call a "streaming server". The client loads the Player from a secure (separate) domain, and the Player then requests the SMIL files from the webroot of the Apache server (part of the FMS installation. The Player then starts the video which is streamed dynamically.
In order for the Player to get the SMIL files, it is making a crossdomain.xml request to the Streaming Server. When it get the response, it continues the process. PROBLEM: Sometimes, the crossdomail.xml response from the Streaming Server is SEVERELY delayed, with perhaps 5 minutes. So the end user experience is that it does not work.
I improved the situation by opening up more ports on the Windows Firewall of the Stremaing Server (now open for 1935,80,443,8134) and it works say 90%+ of the times. But there are still occations when there is no response.
I have prepared a CUSTOM WHITEBOARD. This whiteboard is shared by two clients. They BOTH can draw on the board using TOOLS in the WHITEBOARD PANEL SET of the application. When someone DRAWS I do following actions:
1: Capture the WHITEBOARD FULL AREA/CANVAS using jpgEncoder().
2: Then I send this BYTEARRAY to the FMS server as Remote Shared Object.
3: The client then draws that RSO onto the WHITEBOARD.
Pretty simple though.
BUT, I am having synchronization ISSUES. The issues are as follows:
Issue 1: Image updates with no synchronization and seems to be zig-zag/random when they both draw at a normal speed.