I try to dispatch an error event in an AS3 application:dispatchEvent( new ErrorEvent( ErrorEvent.ERROR, false, false, "my error message"));but I get the following runtime error:
TypeError: Error #1034: Type Coercion failed: cannot convert flash.events::ErrorEvent@2c04239 to com.adobe.protocols.dict.events.ErrorEvent.
at flash.events::EventDispatcher/dispatchEventFunction()
[code].....
I am trying to dispatch a custom event from one flex module to another.The code which dispatch the event is as below Application.application.Destination.child.dispatchEvent(
new AlgoEvent(AlgoEvent.GETFROMPARENT_LOCAL_EVENT));
here AlgoEvent is a custom event.on the other side the module which catches and handles the event has this code:
public function sendParametersToChild(e:AlgoEvent):void
{[ code]...
but when the statement Application.application.Destination.child.dispatchEvent(new AlgoEvent(AlgoEvent.GETFROMPARENT_LOCAL_EVENT)); is executed the debugger give the following run time exception:
TypeError: Error #1034: Type Coercion failed: cannot convert resources.events:: AlgoEvent@4182239 to resources.events.AlgoEvent.at flash.events::EventDispatcher/dispatchEventFunction()[code]...........
I made a custom event, but was getting this runtime error: TypeError: Error #1034: Type Coercion failed: cannot convert flash.events::Event@1498f491 to com.esidegallery.net.BatchLoaderEvent. and eventually found what I thought was the the answer here - [URL] I made the necessary changes, but I'm still getting the same error! It's just a batch loader that dispatches a custom event for every item that loads, with its LoaderInfo object attached. Here's the event code:
[Code]...
//variables
var keyLeftPressed:Boolean = false;
var keyRightPressed:Boolean = false;
[code].....
I should say that this is for a multi touch table so I am using gestureworks library but someone may be able to tell where I went wrong just from the code.I am getting this error and it's really confusing.Error #1034: Type Coercion failed: cannot convert album@2d2e5ee9 to id.core.TouchSprite. at Main().I have a movieclip in my library named "album" the base class is set to id.core.TouchMovieClip (code from gestureworks) and below is my actionscript in the Document Class.[code]
View 1 RepliesWithin my movieclip WinLose I'm getting an error for a movieclip on stage called mcRestart. When it's pressed it's suppose to trigger function Restart. But for some reason, it's giving me the: "TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::Stage@4f4ff99 to flash.display.MovieClip. at WinLose/frame1()"
[Code]...
I am using ActionScript 3.0.Here I want to setFocus on a DisplayObject(flash.display.DisplayObject).[code]But I am getting: Error #1034: Type Coercion failed: cannot convert mx.managers::FocusManager@3881e41 to mx.managers.FocusManager.This is at line:var focusManager1:FocusManager = dispObject["focusManager"];The same code would work if I use mx.core.UIComponent instead of DisplayObject, I guess.But I am not able to convert DisplayObject to UIComponent (invalid cast).
View 2 RepliesI'm still struggling with this flash site, and now time i got this:
TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@31582a61 to flash.display.SimpleButton.
it doesn't tell me where the problem is, nor can i find it on my own >_<
here's the code:
Code:
stop();
contact_in_01.alpha = 0;
contact_in_01_home.alpha = 0;
contact_in_01_circle.alpha = 0;
[Code]....
I have a flex file I am trying to load into a game. the projected .swf file works perfect on its own however when I load it into the main file i get:[code]......
View 1 RepliesRunning into a problem dispatching a custom event from a parent SWF made in Flex Builder to a child SWF made in Flash CS4 that is loaded at runtime. Namely, whenever the child SWF is dispatched an event, I get a runtime error:
[Code]....
The custom event is defined in a standalone library that both the flex project and the flash project link to staticly. I wanted to go this route so that as I add new types of events, I can rebuild the application and flash swfs and not have to worry about moving .as files around (lets hold off on RSL's until I get this *simple* case worked out).
This error message makes it sound like the application defines a myCustomEvent at compile time, and the flash movie defines its own myCustomEvent when it is published. Then when the application is run, the myCustomEvent dispatched in the application doesn't match the one in the flash swf. Now I thought that application domains were supposed to sort all of this out, where the child uses the parent's definition for any classes that are duplicated. But when I load the child swf and use the current domain in the LoaderContext I still get the same error.
[Code]....
iam making a game and i almost finish except one error i couln.t get it
TypeError: Error #1034: Type Coercion failed: cannot convert flash.events::Event@3738fb79 to flash.events.MouseEvent.
TypeError: Error #1034: Type Coercion failed: cannot convert flash.events::Event@3738fb79 to flash.events.MouseEvent.
[code]....
I have a combobox named myComboBox on the stage. My library has pngs with linkages ClownFish, FishWithStar,etc. What I hope to achieve is that when a item is selected in the combobox, my png will show at the stage. but gave me the error:
TypeError: Error #1034: Type Coercion failed: cannot convert "ClownFish" to flash.display.BitmapData.
at main_fla::MainTimeline/changeHandler()
at flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunctio n()
at flash.events::EventDispatcher/dispatchEvent()
at fl.controls::ComboBox/fl.controls:ComboBox:nListChange()
at flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunctio n()
at flash.events::EventDispatcher/dispatchEvent()
at fl.controls::SelectableList/fl.controls:SelectableList::handleCellRendererClic k()
[Code] .....
- In the library, there is 2 different Sprite. These 2 Sprite has a different Class name and used the same Base Class.
- The Base Class is a custom Class
- The 2 Sprite will do exactly the same thing. The only difference is the content image and shape that differs. You can imagin a puzzle. All piece differ, but are use for the same thing.
- In each Sprite, there is another Sprite named Hitzone_inst on the stage MovieClip Name. The item is the shape of the puzzle part, so it is different shape in each.
- The custom Class I can then call the Hitzone_inst as the hitzone for the click
The problem is when I publish, the error appear: TypeError: Error #1034: Type Coercion failed: cannot convert Hitzone_inst_1@14b2c161 to Hitzone_inst_2. It's like I can't used the same Base Class for 2 different items with the same items structure and name inside.
I am getting some errors that i am trying to bypass,my movie has this structurelevel0
- mcParent1 (linkage: _parent1; baseclass:
_extendedMovieClip)
- mcChild (linkage: _child1; baseclass: _extendedMovieClip)
[code].....
I paid an overseas developer to create a basketball plays application in FLEX.Its been having intermittent issues connecting to the database that have recently gotten worse.The connections work fine on this page:http:[url]... but intermittenly it will not connect to the database when a user chooses a play such as this:http:[url]...
I have been trying to track down the issue as the developer blames it on the host.I used a Firefox extension called Flash Tracer which gave me the following error:TypeError: Error #1034: Type Coercion failed: cannot convert mx.rpc.events::FaultEvent@c2e0941 to org.basketballplaybook.GetLinkOnGameResultEvent.atflash.events::EventDispatcher/dispatchEventFunction()[code].....
I have a loader pulling in an external .swf (which works fine) but when I added an event to unload it I got this error:Error #1034: Type Coercion failed: cannot convert flash.display::Stage@47730091 to flash.display.Loader. here is the snippet
ActionScript Code:
private function jumptest (event:TouchEvent):void{
var infoloader:Loader = new Loader();[code].....
I have a project where a 3D VR swf created and compiled in Flash Builder that is being loaded into a Gaia site. The Gaia site is being coded in Flash Builder but compiled in the Flash CS4 IDE. In order to use strong typing I have set up a Flash Builder Library project that holds a few interfaces and VOs to be passed between the Gaia site and the 3D VR Component. That library's swc is referenced in all the projects (Flash CS4 IDE and FB).
If I try to pass a typed object from the site to the 3D VR, I get a coercion failed error. The error only happens when the 3D component compiled in FB expects that custom VO object. If I set the function to expect a generic Object type, it works. I can access the values of my custom VO object manually.
The full error is
"TypeError: Error #1034: Type Coercion failed: cannot convert components.vr.vo::VRRoomDataVO@4640fec1 to components.vr.vo.VRRoomDataVO."
Is there a trick to share custom VOs between Flash IDE projects and Flash Builder projects?
I want to do is pass a variable (1) to a function in a different file...
[Code].....
And I get this error
Actionscript Code:
TypeError: Error #1034: Type Coercion failed: cannot convert 1 to makeWave. at main()
I'm trying to create something super simple, a couple of buttons in a movieclip. Inside the movieclip is the code below. I keep getting the error below when trying to publish this file. AS2 was so easy!! I have no idea what the heck TypeError: Error #1034 is and I did look this error up online.
Code:
var myRoot:MovieClip = MovieClip(root);
var mainmov:MovieClip = MovieClip(myRoot.parent.root);
//mainmov.rdcmndPause = 1;[code]....
ERROR when trying to publish: TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::Stage@30fb7089 to flash.display.MovieClip. at Playpausetest2_fla::test_1/frame1()
I try to load an as2 swf in my as3 code, but I get this error :
TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::AVM1Movie@152e7301 to flash.display.MovieClip.
at MethodInfo-576()
when I remove all the as2 code in that swf and compile it as an as3movie, the error is gone... Is my loading code malicious?
this is my loader code :
ActionScript Code:
private function LoadAktie() {
swfloader.load(new URLRequest("slideshow.swf"));
[Code]....
i am trying to bring over some classes i made in as2 to as3. i've migrated everything appropriately but keep getting this error:
TypeError: Error #1034: Type Coercion failed: cannot convert
ball$ to flash.display.MovieClip. at
test_animateClass_fla::MainTimeline/frame1()
[Code].....
and the .fla loads an external class into it, Animate, which then tries to use addChild() to add a copy of 'ball' to the stage when it's created. a movieClip variable is passed into Animate() from the .fla, which in this case, is the movieClip 'ball'.
why does it have this error converting 'ball' to flash.display.MovieClip?? ball IS a MovieClip already..
I am trying to create an audio that only uses the first entry in an xml file. I have most of the things working but I keep getting an error related to the audio file. TypeError: Error #1034: Type Coercion failed: cannot convert "[URL]. at latestMessage_fla::MainTimeline/frame1()
I inserted the url for the file into error message so you can see if there is s problem with that. I was initially trying to use a variable to hold the url for me, because this xml file gets updated every week and I only want to access the most recent entry. This is my first attempt at making an audio player in flash, so I am sure I have made a simple mistake, but for the life of me I cannot figure out what it is.
One last question is in regards to using id3 tags versus xml tags to fill dynamic text fields in the player. Currently I am using the xml file to do this, are there any advantages one way or the other for this. The only reason I ask is that I am hoping to display an "album art" image from the id3 tag in the player. Would it be better to grab all of the information from the mp3 file?
Code:
TypeError: Error #1034: Type Coercion failed: cannot convert flash.net::URLRequest@c846511 to flash.display.DisplayObject. at theSITE_fla::MainTimeline/movieClick()[theSITE_fla.MainTimeline::frame1:109]
line 109 Code: everything.moviesPage_mc.mainMovie_mc.mainMovieContainer_mc.addChild(newSWFRequest);whole code
PHP Code:
[Code]...
I have main swf that uses DocumentClass to which I load another swf that uses its own class. In main movie there are couple
of buttons that I want to use to load different xml files for external swf. When I tried a few suggestions from this forum I got this
Error #1034: Type Coercion failed: cannot convert Classes::SlideShow@3a49f239 to flash.display.MovieClip.
at Classes::DocumentClass2/onTravelClick()
I am fairly new to Flash and have been building a movie. The movie is working properly, but when I test the movie, I receive an error:
Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@2c882701 to fl.transitions.Tween.
If I ignore this, everything behaves as it should, and when exported to a swf and played through a browser, it works fine. But, when played in the flash player on it's own, the error pops up. If I dismiss the error, it continues to behave normally.I'm not sure what this error means and if there is a way to get rid of it.The swf on the web can be found here:
I am trying to get an external swf to display on the stage once you roll over a movie clip button.My code is below:
import flash.display.MovieClip;import flash.display.SimpleButton;import flash.events.*;import flash.ui.Mouse;import flash.display.Loader;[code].....
I am getting this error in output:TypeError: Error #1034: Type Coercion failed: cannot convert flash.events::MouseEvent@f805299 to flash.ui.Mouse
I'm getting this error pop-out window when I pressed on a button. The button listener contains the following code:
btn_start.addEventListener(MouseEvent.CLICK, gotoStart);
function gotoStart(e:MouseEvent):void{
btn_start.removeEventListener(MouseEvent.CLICK, gotoStart);
gotoAndStop("START");
[code]....
In a 'for loop' I'd like to add an event listener to a series of buttons. For each button I'd like to define a different function. Is it possible to pass the variable through when the functions are being named? My buttons all have sequentially named instance names.Here's my code:
for (var cBut:int = 1; cBut < 4; cBut++)
{
this["c" + cBut].addEventListener(MouseEvent.CLICK, ["orangeValue" + cBut]);
}
And the resulting error:
TypeError: Error #1034: Type Coercion failed: cannot convert []@42f50a89 to Function.
From the book "AdvancED Actionscript 3.0 Animation" I fixed a problem in the code they give you that is using [Embed....] instead of using library objects with linkage names. I still have the error: TypeError: Error #1034: Type Coercion failed: cannot convert Tile_01@1bf93a61 to Class. at GraphicTest$iinit()
[Code]....
i have created a simple movie clip of a blue circle on my first layer but not given it an instance name. I am trying to tell Flash that the following method is legal for the main timeline in the actions panel and send the timeline to frame 20
[Code]...
