Ruby On Rails :: Generating Controllers For Rails In Terminal?
Feb 19, 2012I am trying to create a rails controller in ubuntu terminal with "rails generate controller test_it"
But I keep getting a screwy error.
[Code]...
I am trying to create a rails controller in ubuntu terminal with "rails generate controller test_it"
But I keep getting a screwy error.
[Code]...
I was developing the Application in Flex and ruby on rails.
It is working fine some times. but some times i am getting routing error.
Error: "No route matches "/index.html" with {:method=>:get}"
Here index.html is my login page
I have a XML-file, which I want to send to a rails server. To do so I use the following code:
<mx:HTTPService id="dataService"
result="resultHandler(event)"
resultFormat="e4x"/>
[code].....
I have the following two action methods:
[Code]...
The application is used through Facebook. I click the button and the flash contains the notice while create is being executed, but after that it's empty again. It doesn't survive a redirect.
i'm trying to figure out how i can handle login protected actions in RoR (Ruby on Rails) with Flex without using weborm or rubyamf remoteobject.I'm in the situation where i have to fill a datagrid with results of an HTTPService request after i log in correctly into my application. Can anyone suggest me the way to accomplish that?
View 1 RepliesI'm trying to upload a Dynamically generated file from Flex (PNG image) to Ruby on Rails Server back end using the following code (from Flex on Rails book):
[Code]...
I am trying to login in to my Rails app through an adobe flex application that uses Devise but cannot figure out how to map the AMF request to Devise::SessionsController#New. I tried the following
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="700" minHeight="600">
[code].....
How do I control what parameters are passed in a RemoteObject method? I noticed that when I directly download and run the code from this site, saving an object results in the following parameter set being passed back:
Processing PostsController#save (for 127.0.0.1 at 2011-02-01 23:34:55) [POST] Parameters: {0=>{"post"=>#<Post id: nil, title: "a", body: "b", created_at: nil, updated_at: nil>}, "post"=>#<Post id: nil, title: "a", body: "b", created_at: nil, updated_at: nil>}
[Code]...
I have a rails app that records a video from the webcam. After the video file is saved on the flex server, I need to create a record on the database calling the create action on my rails app from Flex. How can I achieve this? I need a url with params to be called. I think the authenticity_token is necessary to post data.
View 1 RepliesI want to implement an application in Flex/Rails in Background as I know these two languages but I'm fairly beginner with Flex and Intermediate-to-expert with Rails. My application will display a calendar like object by which there are say 5-day week or 7-day week or a month (30-days) and in each day there will be some data such as appointments or such. I want users to be able to drag left or right to get more days after or before the displayed week for example and I want the boxes to be filled with proper appointments data.
What is the best way to implmenet this in your opinion, mainly from Flex point of view? Any architectural tips from the Rails side?
I am trying to use an HTTPService to send a string of text to a controller action. How do I access it within the controller?
View 2 RepliesI have a webpage based on ruby on rails. For one task I need some more complex user interface which I plan to do with a flex programm. The question is, how I can start the a new window with my flex programm and hand over the right url where the flex app can load its data in XML format...
View 1 RepliesI'm looking for a way to upload images that were created in my flex app to rails. I've tried to use paperclip, but it don't seem to work. I've got this tutorial here: [URL] The problem is, that they are using a FileReference to browse for files on the clients computer. They call the .upload(...) function and send the data to the upload controller. But I'm using a URLLoader to upload a image, that is modified in my Flex-App. First, here is the code from the tutorial:
[Code]...
How can we include (nicely) a swf file in a Rails application?By the way, I tried the swf_fu plugin but it didn't work. When I call my swf file located in the swfs directory, it tells me that the method is not found:
View 1 RepliesI am a rails noob. I am having a problem conceptualizing how assets work in an authenticated system. All of the tutorials I've seen so far talk about putting your swfs in the public folder and embedding them in your view. However, the swf I'm using is a flex gui that should only be used by users logged-in through restful-authentication. I imagine that putting the gui into the public folder would be defeating the whole purpose of having an authentication system. So what is everybody doing to restrict access to this kind static content?
View 1 RepliesI am trying to embed a flash file onto the homepage of my Ruby application. The homepage is in /app/view/home, and the flash file is in the projects /public/flash/myflash.swf.When I load the home page, I don't see anything, although the text is bumped below a square of the proper size I defined the file as.The code I am using to try and load the file is
<div id="flashContent">
<object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="346" height="383" id="Blox" align="middle">
<param name="movie" value="/flash/Blox.swf" />
<param name="quality" value="high" />
[code]....
I am thinking that either I am calling the file wrong by using value=/flash/Blox.swf, or that I am storing my flash file in the wrong place period. How can I get my flash file to load?
I am in the process of building a rails/flex application which requires audio to be recorded and then stored in our amazon s3 account. I have found no alternative to using some form of RTMP server for recording audio through flash, but our hosting environment will not allow us to install anything like FMS, Red5, etc.
Is there any existing Ruby/Rails RTMP solution that will allow audio recording? If not, is it possible for Rails to at least intercept the RTMP stream and then I can hope to reference red5's source or something for parsing the data (long shot, I know)?The other alternative I can think of is hosting a red5 server on another host and communicating with our rails app once the saving/uploading is done, which is not preferred.
We have a Rails 3 app using session-based authentication (modified acts_as_authenticated), and a Flex app that needs to be embedded in an html.erb template. The Flex app needs to access routes that have a before_filter set to check if the user is logged in. When interacting with the HTML site, this causes the user to be redirected to a login page, then sets a Rails session property (tied to a cookie) to record that the user is logged in when making future requests.The Flex app needs to access XML that's generated by Rails (behind the before_filter) and I don't want to force the user to log in twice -- what should I be passing as a flash parameter to the Flex app so that it can present as "already logged in" if that session exists (ie, the user has logged in via the HTML interface)?
View 1 RepliesHaving problems embedding my .swf file in rails 3.1. In past versions of rails I'd use swfobject and simply do:
<div id="swfbox">you don't have flash</div>
<script type ="text/javascript">
swfobject.embedSWF("swf/AudioRecorder.swf", "swfbox", "400", "400", "10.0.0", "");
[code].....
I mean, the mvc for cairngorm and the one in rails don't overlap their functionalities? I'm not sure I understand the need for cairngorm with the rails backend..
View 2 RepliesI want to upload a file(photo) from Flex to Rails and then send a response back to the server in XML (contains photo URL and ID). I'm sending from my Rails server some XML as follows:[code]it doesn't seem to parse XML properly. I have used similar code before with URLLoader and it worked.
View 2 Replieshow to use flexpaper for my rails application? it needs swf formats, and our rails wud converted any supported file type to pdf.how to proceed further with converting pdf to swf on the fly and displaying it via the flexpaper app.
View 2 RepliesI'm starting to learn in flex and ruby on rails. I see some projects there is a flex folder under rails_project/app which contains controller, models, views. I think it's not mannually to add these folders to rails project.
View 2 RepliesI have a rails app that I'm going to host on engineyard and want to store image files on s3.But I don't know if I want all developer machines to beusing s3 for storage of all our test and dev images. Maybe it's not an issue -- but it seems like a waste to have everyone storing all our images in s3.I've heard of some ppl who store images on s3 'hacking' dev environments to store images locally on the file system -- and then using s3 in prod only.
View 2 RepliesI've got my first RoR app deployed to Dreamhost and it's using Passenger. The one note on Dreamhost's wiki about slow response mentioned changing a RewriteRules line in the public/.htaccess file to use FastCGI. But I assume this will have no effect if I'm using Passenger, is that right? I've looked at the logs and compared them to my local logs, and it looks like there is a wider range on Dreamhost. Some responses are comparable to the quick local ones, others can take a few seconds. I'm using a Flex front end with HTTPServices to the rails backend, and I think I also need to add logging around my services to see what kind of network delay I'm getting and try to isolate where the delays are. I should also add that there is probably plenty of room for improvement in the area of eager loading associations. I think I did that a little early on, but haven't done it thoroughly through all the associations. I have the local logs set to the default where I can see all the queries, and there are a lot of them.
View 2 RepliesI have a swf file, which handels some xml data. After that process complets I am giving the data back to my rails server. My problem is, that any redirection in my rails app is handed ower to the swf file and the actual displayed page remains the same!
How can I perform a redirection in my webpage from a swf flash file.
I'm running a rails3 project with an external asset host for all javascript, images, swfs etc. This is on a completely different domain. So know I tried to embed some SWFs using swfobject. In development (same host) everything works fine, but in production (different hosts) it doesn't start the flash (firebug shows the file is loaded but nothing appears on the page). I already put this crossdomain.xml file in the root of the asset host but it does not change anything at all.
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.adobe.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*" />
[code]....
What can I do to make it work? The SWFs I'm using are not developed by me, so I cannot change them. Some are simple sounds, others are videos and small "apps". I don't want to have to make rails serve the swfs.
I wanna hightlight the changed or new post after i redirect_to the show page.I know i can use the flash to make a flag for that.but,it sounds not the rails way.
View 1 RepliesI´m looking for any kind of information on this subject, kinda hard to find. I´m a ruby programmer and i´m looking for ways to create web apps with RIA, like Adobe Flex.
View 3 Repliesi am changing from WebORB to Warhammerkids Rails3-amf - great choice, even tehre are some open issues. One those issues is, how can I get records from an association to the array, which is sent back to the Flex-Application. In WebORB the method of the controller looks like:
[Code]...