ActionScript 2.0 :: Controlling Externally Loaded Swf?
Feb 23, 2012
the .FLA files are attached at the bottom. intro.swf is the actual movie and introLoader.swf is the preloader and it loads intro.swf into it.the problem with the actionscript previously was that itd start playing the external movie halfway through the preloader bar as if it was streaming..however i found a workaround that doesnt really work.. i used xyz.stop(); and xyz.play(); functions to control when the external movie plays.The problem with those functions is that i need a check for them i.e if(percentage <100) etc. which causes problems like if the flash movie is already watched once and cached and you reload the page it wont play.
View 9 Replies
Similar Posts:
Oct 7, 2005
I am loading a .swf that a previous developer made (don't have the .fla) but the actionscript at the end of the movie is resolving to home.html. Instead of it resolving to home.html I would like for it to instead have gotoandPlay.
View 4 Replies
Nov 1, 2005
i had made a image gallery using xml in flash MX 2004. some of the images are jpgs and some are swfs. i'm trying to get it so that once the external file, be it jpg or swf, is loaded, it would recenter itself in the middle of the page.so i attached the following code to the container clip that the files were loaded into:
onClipEvent(load){
this._x = ((304 - this._width)/2);
this._y = ((304 - this._height)/2);
[code].....
View 11 Replies
Feb 5, 2011
how to assign a volume control component available in the video components library to an externally loaded swf once it's loaded into my main flash movie? I want to feature the volume control at the bottom of my main flash so that when you click a button to load the swf that volume control will be able to start controlling it's volume. Also, I want to be able to load several swfs and once each one is loaded--only one playing at any given time--into the main flash that same volume control can control them. Is this possible and, if so, how do I do it?I'm using CS5.
View 1 Replies
Jan 8, 2010
Another question regarding externally loaded .swf's!
In my externally loaded swf.s are a pause and play button which work perfectly using only:
on(release){yanm.play();}
(yanm being the name of my movie file containing my movie!!) and obviosuly the stop is with a stop!
Now I want to add a 'Mute' button so that the user can turn off the audio. What script would I use for this?
I also want to use a 'Rewind' or 'Restart' button to return to the beginning of my movie and begin playback again. What script would be used instead of .play?
View 3 Replies
Oct 5, 2006
I just heard something about "Flash Methods". Using Javascript to control the SWF from outside of it. Ever hear of it? What I am trying to do is have the center content of my HTML page reload different textual content when you click on a button in the Nav, but not reload the whole page. The Nav is separate from the SWF content in the center of the page. Is there a way to have it so that when you click on one of the buttons in the Nav that it can tell the swf what fram to go to?
View 1 Replies
Feb 12, 2012
ActionScript Code:
myTextField_txt.defaultTextFormat = new TextFormat("monotype", 16, 0x0CFF00, true);
This controls the output to the stage of my fetched text. It works great, but I would VERY much like to control this externally as well. The color for example. How would I call this in a flash variable to change the color externally? Is it possible with this code?
View 2 Replies
Aug 30, 2005
I am in the process of building a site for an Architect... Jamie Fobert Architects (projects) I am useing transitions between the projects and am loading details/text and images externally through flashvars, php and a mySQL database. Within my transitions I have a a preloader on the forst 2 frames the code is as follows (taken from a Voetsjoeba tutorial):
[Code]....
This works pretty well if the content is within the .swf, but when it is loaded externally it doesnt preload it at all. Does anyone know how I can adapt/improve this preloader? or somehow ensure that all the content being loaded externally is loaded before the transition plays?
View 2 Replies
Feb 16, 2006
I am loading an externally loaded swf that uses a mask to transition in. When the user clicks a different button I am doing a gotoAndPlay that goes to a mask that "unloads" the content (it doesnt actually unload the info is just outside of the mask area. As soon As I jump to that section the movie is no longer loaded and just shows the container clip that I had created for it. The Container Clip is never changed and is the same throughout the whole process. The only thing that changes is the mask animation.I have tried both loadClip and loadMovie but no luck on keeping the clip loaded.
EDIT - I have narrowed it down. When I change the mask movieclip the movie unloads for some reason. Is there a way I can keep it loaded?
View 2 Replies
Nov 8, 2011
I have a homepage with five "links" to each swf. Now the first swf I have a custom cursor that hides the mouse. When I click on that link it plays and when I quickly go to the homepage again it hides the mouse there when it's not supposed to do it.
Same with every other link. When I was busy with the first swf and want to go to the last swf of the five, my mouse just disappears! It is almost as if it keeps on "playing" without seeing the swf...
Here is the code that I have so far!
var currentpage:uint = 0;
//one loader object per project:
var loadingobject1:Loader = new Loader();
loadingobject1.x = 445;
[Code]....
View 1 Replies
Dec 23, 2009
i'm having some "big" issues with what seems like a pretty easy flash concept. But, im pretty green when it comes to coding in flash.
I have a SWF thats being externally loaded into another SWF file (see code below):
on(release) {
loadMovie("test1.swf",_root.dropZone);
}
(If i'm understanding the above code correctly...its loading the SWF into a blank MC i created called dropZone) This part seems to work correctly when tested.
I've got 4 different SWF's that need to be loaded seperatley when its coresponding button is clicked. The issue arises when I import the external SWF file...it resizes itself to the size of the flash stage. I need all the SWFs to be loaded and remain there original size (1257x847) or be scaled to the correct size. Then if I click another button it should load the new SWF and "unload" the old SWF.
View 3 Replies
Dec 2, 2009
if a loader can be added to let the user know the video is being loaded rather than a blank 20-30 seconds...
View 18 Replies
Feb 10, 2010
I'm loading swf's via an XML file. I'm wanting them to be added onto the stage in the same order that they appear in the XML. The problem that I'm having is that they are added to the stage only when they are fully loaded.
This is my xml (_config.xml)
<campaign>
<component SWFsource="logo.swf"/>
<component SWFsource="gallery.swf"/>
[code].....
View 3 Replies
Dec 2, 2009
I have a fairly chunky swf that I am loading through the loadMovie function. Just wondering if a loader can be added to let the user know the video is being loaded rather than a blank 20-30 seconds...
View 1 Replies
Aug 7, 2009
With the assistance of a very kind member of this forum, I have got as far as getting an .FLV to load into my API via its own .SWF.
[URL]
click on "Animalia - Verse from the Zoo" to load the VideoPlayer .swf which contains the .FLV
I will add more functionality when I've solved this. Now that I have a Video Player which closes, the next set of hurdles to overcome are these:
Click "Close" with the .FLV playing and the sound keeps playing because the .FLV is still playing. Click "Close" with the .FLV paused and when you call the player back, it plays from the same spot. So, my tiny brain says it's an "add/removeChild" issue. Obviously when happy user clicks "Close" and then re-loads by clicking "Animalia", happy user wants the video to play from scratch. That's what I want, anyway. Not from where it left off after clicking "Close". I've made several attempts at adding a "remove FLV" object to the function and Event Dispatch method, but what I did is wrong because the code I put in removed the .FLV permanently and when you call the player back by clicking on "Animalia", the .FLV does not play at all. I'm going round in circles looking for the correct NetStream/removeChild/unload.nsplay/etc/etc .. AS3 coding and where to put it.
My .FLV video load object on "NewPlayer.swf" is:
var myVideo:Video = new Video(360, 264);
addChild(myVideo);
var nc:NetConnection = new NetConnection();
[Code].....
My questions is:- What is the correct coding to get the VideoPlayer .swf to unload its .FLV completely, SO THAT when a user clicks "Close". Either with or without the .FLV playing, everything closes completely and when re-loaded, the video plays from scratch?
View 2 Replies
Sep 16, 2009
I am externally loading an flv into an empty movie clip container using loadMovie into a main swf. The flv is in a standard flv playback component and works fine on its own. But what I'd like to be able to do is pause the flv when any of the buttons in the main swf are pressed.
View 7 Replies
Jul 26, 2009
I'm working on an flash movie and the interface is a small town (simiar to "doritos.com" and "comcasttown.com") if you reference both the doritos and comcast sites their little movie runs smoothly. I have several elements in the town. For example, one of the elements is an airplane hangar. When you rollover the hanger, I created a movie, the doors open and an airplane flies out of the hangar. I have several little movies throughout the interactive such as this. I created the hangar animation as a seperate swf file. In my main movie I created a button, on rollover it loads the hangar swf into an empty movieclip. When I publish and view the swf it plays slow and choppy. First, is it possible to write actionscript to load the external swf ,but it stops on the first frame of the animation and when you rollover it continues to play.To put it all in a nutshell, I want to create several buttons throughout the movie with loadmovie functions, once the swf movies are loaded I want them to stop on the first frame of the animation and when you rollover loaded swf movie I want it to continue to play the animation. Should actionscript be applied to the swf movies first and preloaded into the main movie. And what will make the movies run smoothly once it's published and viewed in a browser.Also if this makes a difference, I created the animations in after effects, exported them as FLVs imported them into flash and exported them as swf. Again it runs really slow and choppy
View 1 Replies
Jul 30, 2009
I was wondering if there was a way in Flash to preview externally loaded images in Flash while still working.I am loading images externally to keep the file size down on a piece of elearning but now I'm afraid maintenance will be a nightmare since you don't actually see the screens until you publish. I have interactions on the screens so I need to see them for their placement on screen.
View 5 Replies
Aug 3, 2010
I have the action script that loads external SWFs on a button click, but I don't know how to make it so that the slides switch after a few seconds on their own as well as on a button click. I know it has to do with a timer - but I have no idea how to do that (i'm super new to AS) Can someone please either tell me what code I need there or direct me to atutorialHere's the code I'm using so far:
var Xpos:Number = 0;var Ypos:Number = 0;var swf:MovieClip;var loader:Loader = new Loader();
var defaultSWF:URLRequest = new URLRequest("swfs/one_btn.swf");
[code]......
View 12 Replies
Jan 7, 2010
I have a site that I'm working on that I am loading an external swf page into a main one. The main one is based on a totally liquid state and stretches the background to fill the browser and the components are relatively position based on browser window dimensions.
Now inside of the main swf I load an external swf through the loader command. This swf has a set dimension and stays centered in the stage.
I am trying to make a button in this swf that loads yet another swf that is stretches the full browser. However I do not know how to access the properties of a main swf from this external one, or if this is even possible.
View 3 Replies
Mar 30, 2011
So I have an SWF that I've made and I need to appened some instructions to the beginning of the project. I figured the easiest way to do this was to make the animation in a separate SWF then import it to the start of the first one. My problem is that I can't find a reliable way to tell when the first SWF is finished playing. I've googled the heck out of this but I can't seem to find anything that works. For some bizarre reason, no matter what I do the program seems to think that the external SWF only has 2 frames, if I put an ENTER_FRAME listener and trace externalSWF.currentFrame I get "1, 1, 2, 2, 2, 2, 2, 2..." My code looks something like this.
[Code]...
Also, for the record, the external SWF plays properly when I add it as a child. The problem is removing it from the stage when it's done playing. It's interactive so I can't just do a frame count.Edit: So I tried doing a getQualifiedClassName() call on extSwf and I got "Instructions_fla::MainTimeline_Preloader_" which could explain the frame discrepency. How can I have access to the actual timeline?
View 2 Replies
Jan 14, 2009
on frame one of the main timeline I am loading an external movie. When that movie gets finishes playing, I want to jump back to the main timeline, to frame 2.
What actionscript do I put at the end of the externally loaded movie?
stop();
this.parent gotoAndPlay(2); ?????
View 2 Replies
Jan 30, 2009
Can anyone explain the model for actionscript in externally loaded SWF assets? For example, suppose the stage owner uses methods from Class1 and that it loads an SWF file with an asset that also uses methods from that class. This means the code for Class1 is included multiple times in the application?
View 3 Replies
Sep 2, 2009
I have the code below working great except for not being able to scale the JPG file once it's loaded.
The code below loads my JPG files into a a group of MovieClips. Once clicked the Current_mc will jump to the top and enlarge. Once clicked again it scales back down. My plan is to load in a large JPG file (800x460) in the loader but have the size be small until someone clicks one to enlarge it. So...long story short I want to know if I can load the JPG file and set it's width and height in the loader
ActionScript Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
pic1_mc.pic1_load.loadMovie("c1.jpg");
[Code]....
one last thing. Is their a way with AS to set "Smoothing" to true? If my images come in smaller they will probably look like crap till they are scaled up to 100%.
View 3 Replies
Oct 9, 2009
I'm loading an external SWF file to a container MovieClip (adding it as a child), but have the need to create a button over the loaded SWF.The external SWF should still respond to MouseOver events like it used to.
I tried adding the AS3 created button to the container MovieClip, but it wasn't visible anywhere (the position was right in the middle of the container). Obviously, the SWF shadowed it.
View 2 Replies
Nov 12, 2009
I don't know why I'm having so many problems converting my project to AS3.I seem to be stumbling over every little thing.I'm loading an external (AS3) swf into an empty movieclip located on the stage.All I need to do is pause this swf using a button located on my main timeline.I have tried multiple solutions found in some posts here but nothing seems to work for me.here's the code for the loader:[code]The child swf I'm loading consists of a layer with two movieclips that contain all the animation. And a layer for the AS that has an enter frame event listener to advance to the next movieclip once the first one is complete.I have a movieclip functioning as a button on the parent movie that needs to pause the external swf.
View 2 Replies
Nov 17, 2009
I'm loading SWF B into SWF A... SWF B has sounds in it's library that have been exported for actionscript. Can I access those from SWF A? And if so, how?
View 5 Replies
Nov 24, 2009
Is it possible to tell an externally loaded swf what its root is?
These swf's I want to load in:
main.swf --> manager/g1/viewer.swf
In the main.swf I want to tell the viewer.swf:
your root = ../manager/g1/
So the viewer.swf can read the external xml and images from its own root. (../manager/g1/)
View 0 Replies
Dec 9, 2009
I have a main Flash file with 2 buttons at the top and depending on which button is clicked, I load an external swf onto the stage below the button area. However, focus is not set to the newly loaded swf file. How can I set focus to it?
View 2 Replies
May 2, 2010
I fully load a swf in my constructor function. It's actually an swf with an flvplayback component. It loads, is placed on stage and it's visible property set to false. I then have a button that makes it visible and ready to be interacted with but what I wanted to know was if I could have the swf reset itself without having to have to unload/load or add/remove from stage. Simply reset the loaded swf to it's original state?The user clicks a button revealing the loaded swf. Watches the movie embedded in the flvplayback. The user then looks around at other stuff on the site and later decides to watch it again. When he presses the button gain it should be as if he's pressing it for the first time.Simply rewinding the flvplayback component or any other method of the flvplayback class is not an option. The initial state of the swf is not the actual component but some text explaining the idea behind the movie and then a button that takes you to the playback component.
View 0 Replies
