User is required to move the mouse within the movie clip, if the cursor is inside the movie clip, something will happen else if the cursor is outside the movie clip another thing happeno fill in the blank.yclip.onPress =function () {if (the mouse cursor is within the boundary of movie clip){flower._visible=true;}else{table._visible=fa lse;}
View 5 Replies
I'm working on a pathfinding algorithim using A* and using irregular polygon shapes as obstacles rather than a grid. I don't fancy plugging in all the points and links by hand and was wondering if there was some way I could just get them from a Sprite or MovieClip?
View 1 RepliesIm able to link to a movieclip inside a movieclipUnfortunately one of the movieclips now are a scrollbar and scroll. Now the actionscript isnt working?cal.onPress = function() {gotoAndPlay(2);message1.contentMain.message.total = unit1;
View 17 RepliesI am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
[Code]...
I'm creating a small drag & drop activity, and I want to be able to check and see if the dragged movie clip is completely within the bounds of another movie clip (or at least in the bounds of a certain x/y zone on the main stage. I can't use dropTest because it returns true if any tiny bit of the movie clip overlaps with the dropTest movie clip.
I also thought of something that just checks the x/y coordinates of the dragged movie clip, but I'd need this to reflect a range of values rather than one coordinate. For instance, I'd want to return true if the movie clip's x is between 50-60 AND the y is between 50-60. I'm attaching a small graphic to illustrate in case my explanation isn't clear enough [URL]
I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
i am making a pacman game, and i need to know how to make it go to a certain scence when a movie clip collides with another movie clip.
View 2 RepliesThere is a bad gap in my knowledge with Event Dispatch and Event architecture, and this problem proves it. I've been getting nowhere on this problem for two days, I've posted everything to my Flash site. Go here, please: [URL] Click on "Flash Banners" The two thumbnails represent two different classes. Each class is identical. Both are "extends Movie Clip" classes. Tweeners of various types control the hover and click methods. URL Loaders load the thumnails which I then wrap in MC's and make them buttonMode = true, etc. Hover and click to load the Banners on the thumbnails.
I can't send an event from the Eagle movie clip or the T2D movie clip to tell the other to fade out. Both Banner classes are instantiated through a separate Base class. I'm sure this has to be an Event Dispatch from one MC to another and that it can't be done by the Base class. how I can send an Event or Event Dispatch and what the code structure is so one movie clip can in one class can tell the other movie clip in the other class to disappear while it's neighbour is playing. I'm happy to post code or explain / clarify anything that's not clear.
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
it seems simple enough but i have no idea on how i could get a movie clip to slowly move to the coordinates of another existing movie clip
View 5 RepliesI created a movie clip which plays ok. But when it ends there is a slight jump, if you will, when it goes back to frame 1 to begin playing again. Does anyone know how to make the transition unnoticeable from the last frame of a movie clip to the first frame of a movie clip?
View 4 Repliesiam tring to make a new project , i just wants to know how to make a movie clip ( constant speed ) follows anther movie clip <--- "which can be moved by the user "
<<<>>>> i believe that this idea is good , that i records the X and Y postion of the User's movie clip and just make the other movie clip points at this postion and move toward it ,
how to make the other Movie clip (( which is a car ! .. so it have acceleration , speed , steering , etc )) go to this position or let us say try to??
Q1) The registration point of a created clip is top left - my question is how can I dynamically change it's registration point - say to center center?
(I am trying to attach a movie clip to a created clip and I wanted it to be centered inside the container - a related sub-question, how can I find the x-y coordinates of the attached movie clip within the created movie clip?)
Q2)When I tried to create two different movie clips, I found I had to create them at different depths, else the first would load and the second would not. Why would that be so? I'm on MX 2004 Pro.
I have a very simple problem but I can't find the very simple solution to it. I've create an animated menu with animated movie clips inside to work as buttons. All the main buttons work perfectely but I've got just on button with a sub-menu. On this sub-menu I've placed an invisible hitarea button in order to place some gotoAndStop action. The thing is, it seems to me like this submenu hitarea are underneath something else (even though is the seccond layers right about the actions layers). I've placed a simple trace action whenever the mouse rolls over this area but I get nothing... Am I doing something really wrong? I'm losing all my hair already.
View 2 Repliesi am trying to use the Tween class to change the size of movie clip to certain height.the code works for me but when resizing the parent, it effects the child.i tried the height and scaleY property for the thum, but does not work.
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[code]....
I've imported 9 .mov files in my flash presentation. Each lasts for about a minute, and the language is english. I have translation of each video clip in Serbian language as .txt files. And now i need that text to go below the movie clip simultaneosly with the voice in movie clip. And for example when i press pause,the text stops,and when i resume it,the text goes again.
View 1 Repliesit isn't such a big problem bur for a beginner like me it is.I have a movie clip called "Lion_beginning_mc", inside of it I have 3 Key Frames and Inside each and one of them I have different shapes.For example:Key Frame number 01 - DogKey Frame number 02 - CatKey Frame number 03 - MouseI want to move this movie clip "Lion Beginning_mc" form Key frame number 1 to Key frame number 20.I want the Dog,Cat and a mouse to change between each other only once while moving from Key Frame number 1 to 20.And then when the movie clip "Lion Beginning_mc" reaches his goal another movie clip or a frame (with a shape) will start.
View 5 RepliesI have in my root:
1 Movie Clip instancied as a "cursor" 1 Movie Clip instancied as a "Mc_Obstacles" with others 5 Movie Clipsand the 5 Movie Clips inside the "Mc_Obstacles" are instancied as "Obstacle" , all with the same instance...I want this: when the mc "cursor" hit one of mcs "obstacles" gotoandstop to frame X then i did in frame with actions in another layer:
cursor.onEnterFrame=function(){
this._x=this.x+10;
if(this.hitTest(Mc_Obstacles.Obstacle)){
gotoAndStop(4);
}
}
I really have two questions: How do I affect both a movie clip and its child movie clip in the same function? and how do I pull info from one component into a function for another? My basic setup is a movie clip of font choices, one on each frame: "bodyText_mc." Each of these frames has a child clip "bodyText_mc.bodyText" with alignment choices for the font. For instance, the user picks "Script" in the first ComboBox and then picks "Align Right" in the second. (All of this text is static because I need more design control that I can get with dynamic text.)
First of all, I have a combobox "cbBodyFont" that I use to go from frame to frame on movieclip "bodyText_mc." This works nicely:
[Code]...
CS3 Flash - Complete newbie to Flash and I'm trying to change an existing flash piece.It consists of 4 different text statements that appear on a Black background - the first appears and stays on-screen for 10 secs, then it starts to blur and fade away in about a sec, and then the next statement appears, etc, etc., and the whole lot loops.The 4 statements appear as Video Clips (Symbols?) in the library.I need to add a new statement, which means there will be 5 statements. I duplicated one of the library items and renamed it, which seems to have worked fine... but I cannot then work out how I insert that video clip into the Timeline and still have the same visual effects and timing as the existing ones? I can insert a blank frame, but then I can only drop the new video clip text onto that one frame.I've tried copying and pasting a whole set of frames, and then go in and change the text. Which I thought had worked, but then discovered that it also changed the original frames.... now understand that's because they are just instances and any change will affect the master Video Clip!
So can anyone advise if I can insert my newly added and renamed video clip into the timeframe and create the same effect as the others?Please keep any advice as idiot-proof as possible as this is my first venture into Flash... not finding it as intuitive as I hoped, spent 6hrs to date just trying trial and error without any real success.
I am making a web site in flash in which I have multiple movie clips.I have mc_buttonMenu on the main timeline.Inside of mc_buttonMenu, I have 3 buttons that are all button symbols.From the main timeline, I have a movie clip called mc_allPages.In this movie clip, I have a few layers.I have the content layer.This layer controls how my pages display.I have another layer called labels.I labeled frames 1 to 10 as 'home' and layers 11 to 20 as 'contactUs'.I have another layer in mc_allPages called actions.I put a stop(); on frame 10 and frame 20 on this layer.I want to be able to control the movie clip mc_allPages from within the movie clip mc_buttonMenu.I put some action script in various places, but it never worked.I tried this action script:
_root.btn_home.onPress()
{
Gotoandplay("home");[code]...........
I tried placing that code on the main timeline, inside mc_allPages, inside mc_buttonMenu and split up into both buttons appropriately for btn_home and btn_contactUs.Sometimes the animation would stop on frame 10 and sometimes it would just play through to frame 20 and ignore the stop(); I put on frame 10 inside the mc_allPages movie clip.However, whenever I pressed the button ( btn_contactUs ), it never went to the frame labeled "contactUs" in the allPages movie clip.
I'm making a room escape game and I've run into a problem. When an item gets added to the inventory, I'd like the user to be able to click on the item to affect another object (e.g. clicking screwdriver hides screws and displays other image) however when I add the code to the item, if the item is clicked and it's nowhere near the object it affects, the image pops up and it looks really stupid.
So what I'd like to be able to do, possibly using if and else statements or whatever's easiest, is to only have the inventory item be clickable if the movie clip of the object is affects is visible on the stage.
The question is, How do you apply a function to a movie clip inside a movie clip inside a movie clip. So there are three mc and I need to apply the function to the inner most one.
Here is what I have. The 'a' is in 'spin_4' wich needs to be in 'portal'.
ActionScript Code:
for(var i = 1; i<=12; i++){
this.spin_4['a_'+i].onEnterFrame = function(){
if(this.hitTest(_level0.man)){
[Code]....
i made a movie clip name floor, and inside it are movieclips called plan0, plan1, plan2, plan2, and so on.
so to make it easy, it put the movieclips inside the floor movieclip into an array, like this:
daFloor = new Array();
for(a=0; a<10; a++){
daFloor[a] = "plan"+a
}
[Code]....
both didn;t work. how to access the inside movieclips through array;
What action script would i need to make a button in one movie clip goto and play a frame in another movie clip? Im not very good at flash but i've been trying my usual codes but it dont work..
View 2 RepliesI'm loading an external image into an empty actionscript movie clip (holder1) using MovieClipLoader(); on frame one of my movie and is invisible. Then when the movie plays, there is an empty movie clip symbol (image1_mc) that is placed manually on the stage within another movie clip symbol (flash_mc), and is also on a bottom layer of a mask layer which is animated. Is it possible to place "holder1" inside of "image1_mc" so that I can treat it as if it were an embedded image? In other words, have the image in "holder1" inside of the manually placed movie clip symbol "image1_mc" so that I can use it like a regular symbol on the stage?
View 1 Repliesive got a slider menu which opens when clicked. however the buttons (also mc instanced) inside the slider mc wont work... here is the code:
[Code]....
the slider mc works however i cant seem to get the 'web_MC' to respond..
how to attach a movie clip to another movie clip after drag and drop .I mean to say that is it possible to make a new movie clip with the target movie clip and dropped movie clip.
View 2 RepliesScene1->MovieClip1->Image1(as a button)Scene1->MovieClip2->MovieClip3->MovieClip4->frame1Now I want to call frame1 from Img1 have a parent Scene1 common.How can I do this.I have tried
on(release){
_parent.MovieClip2.MovieClip3.MovieClip4.gotoAndPl ay("frame1");
}
[code].....
I have several movie clips on the stage. They are draggable. I want to be able to drag the movie clip, then when it is dropped, a copy of that movie clip will appear where the first one had been, and the first one will just stay where it is on the screen.
However, I'm running into problems with the syntax.
Here is my current code:
[Code].....
