I'm using the XML and FLA file from this tutorial: [URL] I added right and left arrows to the thumbnail scroller so when the mouse is over the arrows, it should start scrolling. Here's the site I'm working on: [URL] As you can see, if I click on the arrows in the scroller, nothing happens. How can I have the arrows activate the scroller? Here are my FLA and XML files: [URL]
View 2 RepliesAlright, I've done the XML Photo Gallery Tut and am attempting to make the thumbnails scroll up and down instead of left and right. Apparently it's not as easy as switching X and Y. The tutorial is located a
View 3 RepliesI've done a basic thumbnail scroller before, but now I'm trying to make one like the scroller at I need to figure out how to get the popout with the text on it. Specifically when the image is the center image. Can anyone point me in the right direction?
View 3 RepliesI am building a full screen image gallery. I would like to have a thumbnail scroller menu at the bottom. As the user mouse overs a particular thumbnail, the image will appear fullscreen behind the thumbnail menu. I would like it so that the image appeared immediately as the user mouses over (i.e. the image is somehow already loaded in) as opposed to each image being loaded as the cursor is rolled over.
There are several images, so loading them all prior to running the application really isn;t an option. How could this be achieved? Are there any tips/tricks that can be used?
I have read the tutorial: [URL], and I based my flash file off the code given there. I would like to, instead of letting the thumbnail_mc's scroll when you rollover them, have buttons on either side that scroll (slow when mouseover and fast when pressed) the mc's instead. Here is what I have, which doesn't seem to work:
Code:
previous_btn.onRollOver = function(){
thumbNailScroller(30);
};
next_btn.onRollOver = function(){
thumbNailScroller(30);
[Code] .....
I have a external swf file of the kirupa xml thumbnail gallery. the first problem i had is the thumbnail scroller didnt work. ive been struggling to fix this problem, for a few hours now. ive been googling this and found solutions that i had to change _root. to _level0 , _parent, and _root.container these kinda works but the next big problem i have now is that it scrolls but it keeps shaking left and right constantly and tis really bugging me.
View 4 RepliesI'm trying to combine a couple different dynamic image galleries. I've got a thumbnail scroller but I'd like it to rotate 8 every eight seconds until a thumbnail is clicked.
I'm clueless here. I could probably come up with a jacked up workaround if this wasn't dynamic, but it is.
[Code]...
I am creating a thumbnail scroller and I have everything set to work. The last final issue I'm having is this:
The scroller displays 25 items.
8 at a time.
When you page left/page right it scrolls to the next(or previous) 8 thumbs in the list.
This is what we want to happen:
Once the final (25th) thumb is reached it starts over on the first thumb again and we are back at 1. So that it becomes an endless loop.[code]...
getting a vertical and horizontal thumbnail scroller to work at the same time, based off of the xml photo gallery tutorial here on kirupa. I'm using FMX04 and I can get one or the other to work but not at the same time. Once I can get them both to work at the same time I would like to make the vertical set load a different set up thumbnails,I know it will involve editting the xml and hence adding to the xml loading into flash but I'm unclear on that also... on another note, is there an easy way to make the image holder resize to the image, so as to accommodate both vertical and horizontal images without skewing them?
Here's my code (as) so far...
Code:
// start of horizontal code
function loadXMLh(loaded) {
if (loaded) {
[code]....
I am trying to use rhamejs slideshow (located here) and I would like to move the scroller to a certain position on the stage but I'm not sure how to do it. My stage is 900px wide with a nav bar along the bottom. All I want to do is move the scroller to the right of my nav buttons and left of another button that is in the far right corner. I would like to stay within that space which expands depending on your browser/screen size. The main stage is set up to resize based on browser/screen size and all the nav buttons are anchored. I basically need the left edge of the scroller to be 535px from the left edge of the stage at all timesI need the right edge of the scroller to be 185px from the right edge of the stage at all times. I have tried editing these lines but after the width of your window gets to a certain point, the thumbs stop scrolling or disapear completely:
Code:
if (nav == "nobuttons") {
scroller._x = 0;
[code]......
this post references the files listed at:i've implemented a dynamic text box that calls a txt file into it. it uses a scroller that i found a tutorial on:i've got everything working splendidly - everything EXCEPT the scrolling bar... as you can see, it scrolls up and down just fine, but doesn't control the text.i've pretty much exhausted my search through the actionscript to locate the problem and i can't find it.
View 1 Repliesthis post references the files listed at:i've implemented a dynamic text box that calls a txt file into it. it uses a scroller that i found a tutorial on:i've got everything working splendidly - everything EXCEPT the scrolling bar... as you can see, it scrolls up and down just fine, but doesn't control the text.i've pretty much exhausted my search through the actionscript to locate the problem and i can't find it.
View 8 RepliesI've been trying to do is to move a string of thumbnails - thumbHolder_mc - incrementally (like every 386 pixels) left and right, controling it with arrow buttons. Code below works like a charm EXCEPT when I try to stop the tween motion on either end.
I tried everything - _visible = false, enabled = false, delete function, etc etc, nothing works. In the my script below, buttons get disabled, but never recover. Function never comes "back to life", which is what I thought it was supposed to do:
[Code].....
I would like to position relatively a scroller in my application like below.When I scale the image, I resize the scroller...
<s:Scroller width="50%" height="50%" >
<s:Group>
<mx:Image
[code].....
I am trying to build a vertical slide scroller based on a tutorial for a horizontal slide scroller and am having difficulties undertanding what values I need to change in the code for the slider mc in order to make it work. The horizontal slider is quite smart [code]
View 3 RepliesI have made a image-viewer. I've this AS for the viewer:
Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
function loadXML(loaded) {[code].....
Now i would like to make a loop for the thumbnails so they don't have a beginning or end(Now when i scroll to the right the thumbnails stop at the last thumbnail, i want it to begin at the first thumb again).I'm also trying to make that the middle thumbnail represents the photo in target_mc.
I am making a gallery, which you can view here:[URL]ok, firstly, when you click a thumbnail, you cannot scroll them until you roll off the click thumbnail, and I'm not sure why. is it just a movieclip thing? or can I put some code in to re-get focus of something? ok, now for the two general questions:
1. When you roll over the thumbs, they go up, sometimes they flick back down though, even though you are rolled over them still. is this just because they are moving?
2. Does anyone know why when I add this:
[Code]...
my problem is that if you go over the menu text above my scroller it controls the scroller. I wan this areas movement to have no effect on the scroller below. is there a way to script my scroller to set it to this?
View 1 Replieshave a cool vertical scroller that I did try to convert to horizontal, but I could not make it work.
//code by Billy T
//set a variable
targY=0;
//set the x position of the dragger
dragger._x = 370;
[code]....
change vertical scroller to horizontal scroller?
View 2 RepliesI would like to use it as a horizontal scroller for an image gallery. Just to clarify a horizontal dragger and a horizontal stage motion for image viewing.
fscommand("allowscale", "false");
bar.useHandCursor = dragger.useHandCursor=false;
space = 20;
[code]....
I can find tons of articles/tutorials on custom scrollers but none of them actually replace the browser scroller. If the browser is made smaller the custom scroller and the browser scroller are there. [URL]...
View 1 RepliesIm trying to create via xml and a for() loop a thumbnails wiewer and each thumbnail have a simple onrelease function.....but my probleme is that my 'container' movieClip and 'BT' movieClip dont show when I export the movie...also when i trace()them the output is empty. maybe is because they are inside x.onLoad(xml){} function ? At the end of the script you can remove // before the trace() function for ckecking in the output panel. here is my code:
xml file: TumbLoader.xml
<?xml version="1.0" encoding="ISO-8859-1"?><slideshow><photos thumbnail="thumbnail/1.jpg" /><photos thumbnail="thumbnail/2.jpg" /><photos thumbnail="thumbnail/3.jpg" /><photos[code]...
I am trying to build a vertical slide scroller based on a tutorial for a horizontal slide scroller and am having difficulties undertanding what values I need to change in the code for the slider mc in order to make it work. The horizontal slider is quite smart and there is additonal functionality attached to it to affect it's movement which I'm not too worried about although it would be nice)
Code:
// set up content_mc info
contentRight = _root.content_mc._x;
[code].....
Yes, I'm making a photo gallery like everyone else. I'm making it so people can order pics from the site. There are going to be about 500 photos per album in 5 different categories. The photos can be shrunk down to about 60kb a piece. If I use the actual pictures as thumbnails, just scaled down, the total size of all the pics will be about 30mb. I know this is a lot.
Either way, the people looking at the album will most likely look at nearly all the pics so they will be using up bandwidth either way. Plus, if I use the actual pics as thumbs the user will not have to wait to see actual pic when it's clicked on because it's already loaded. A preloader is annoying to me. I do realize a preloader would be wise when loading the thumbs. Just dislike them after you click one for the big picture.
So is using shrunken thumbs a necessity or if the big pic is under a certain size it shouldn't matter if I use it for a thumb also?
I am working on a flash photogallery. It is pretty basic, just consists of thumbnails. The larger images are on another page all together. I didn't write this script myself, I'm still learning. So i grabbed a flashmo file. It is flashmo_067.Anyways, i changed some things around. I made the images scroll with the mouse and i took out alot of the extra stuff in the gallery. I also changed the document size and the thumbnail size.I created thumbnails to the exact size i made the holder in the flash file. Yet when i pull up the movie, the images are doubled in size and are overlapping. I have looked at the actionscript a bunch of times and still cant figure it out. I changed the size of the thumbnail to be smaller but it just blows it up and makes it very pixelated. I cant seem to figure it out.
View 5 RepliesI've been trying to make a scroller, but the movieclip IS the scroller (if that makes sense?)So I have a movieclip that's, say, 1920 wide, and the stage just resizes to the browser, and when you drag the movieclip it scrolls. I have this semi-working but it's quite buggy on resize, and i also want inertia on the movieclip when it moves.
View 9 RepliesI'm editing a scoller and have removed a photo from it however as the scroller scrolls a gap slowly appears where the original photo was. I can't seem to stop this happening?
View 1 RepliesIn flex 4 I'm using a PopUpButton with a Menu populated with records from the database.For one of our clients, the data provider of the Menu has more than 50 elements.When they click on the Menu it expands beyond the height of the screen without showing a scroller or responding to the mouse-wheel.So in effect there is no way to access the lower items on the menu.So I need to somehow restrict the height of the menu and add a scroller.The rowCount and maxHeight commands are having no effect.
var companyContextMenu:Menu=new Menu();
companyContextMenu.maxHeight=400;
companyContextMenu.rowCount=20;
I'm working on a small project and I'd like the player to be able to explore areas outside of just the 800x600 window, AKA scrolling is necessary.
I'm not working in the Flash IDE, I'm just writing actionscript in FlashDevelop.
Anyway, I'm trying to think of a clean way to scroll the map and all associated objects when the player gets near the edge of the screen.
Here's how my app is currently set up:
I've got my Main object, which is the parent app.
Under that, I have a 'DudeHandler' object, which will contain all the players. At the moment it just contains the player, and another test guy in order to see the effects of scrolling.
Then I have the 'Soldier' object, which is an individual player.
In a perfect world, when the player got near the edge of the screen, I'd just move the DudeHandler object, but I guess my main problem is trying to find out the actual screen coordinates of the player, since the x and y vars point to the position relative within the Dudehandler object, if that makes any sense.