when loading/unloading external swfs into a container movie,i`ve noticed that any intervals (within the loaded files)i`ve used are not being cleared despite the movie being unloaded causing errors when the same swf is reloaded. Without manually clearing all intervals is there a way round this?
View 1 RepliesI am creating a course that requires loading/unloading of several swfs in a container. My course structure is something like :
Course->Module01->src->test.as
->Module02->src->test.as
When I load file from Module01 in my container it works fine, but files from Module02 is not working as they should. They seem to be reading the code from the as file in Module01. The course works fine when I give the as files different names, but I want to keep the names as they are now as I have created several modules and sub-modules on similar structure.
I have a question regarding the swapping out of swf files in Flash CS3 / AS3.I start my project with a �logo� swf, which has no interactivity.At the last frame, the following code is used to load another swf from the local folder:
-------------------------------------------
//Stop current swf and stop its sound
stop();
SoundMixer.stopAll();
[code]...
How do I remove and/or unload the previous swf when a new one is loaded? and remove that previous swf from memory? Can I give the current swf access to the previous one, then run a �remove� or �unload� function on it?
After years of putting it off, I've finally begun the move to AS3.The frustration I've encountered is evidently shared by a lot of other designer/developers. Knowing that the future is inevitable, I have bitten the bullet and forged ahead. There has been one thing, however, that has just been a real quandry and has cost me hours of banging my head against the wall.That would be getting an externally loaded swf to (really) unload in an AS3 file.Before I even begin to post code, let me just say that I've tried a lot of things read in books, posts from this and other forums, and trial and error to no real avail. In my research I've come across many others who are experiencing the same problem and even one reference that suggests you not use AS3.For a project that uses multiple loads and unloads that's due in a month, should I just go with AS2?I'm using CS4 on a PC publishing to Flash player 10. And yes I have tried "unloadAndStop()" and "removeChild()".
View 8 RepliesI am making a website that will have many levels of externally loaded swfs.
1. How do you load and unload the externally called swfs with either an animation within the swf movie, or through the AS when you call it.
2. I will have my navigation loaded on a top level and everything else loaded below. When I click on another Button from my navigation that will load another swf movie- How do I unload the swf that is previously there?
Working on a project that has a main stage and loads/unloads external swfs into it. Most of these external swfs also contain FLVs (that are also loaded externally via FLVPlayback). Basically the user clicks on a button in the navigation and it should unload the swf and FLV that is currently playing and then load the new one. Then after the the FLV and swf play theres a "close" button that they can click to go back to the "home" swf which would be hidden underneath. I got it to work to an extent - but the FLV (even though not visually there) still has its audio playing in the background..
View 3 RepliesI am creating an interactive slideshow, like a PowerPoint effect, I have a main scene, 4 Buttons, a Home Button, Play Button, Forward Button & Back Button.I want the Home Button to take me back to the start of the scene, Forward Button to Load a External swf slide and when the Forward Button is clicked again to Unload External swf and load in the next swf slide, I also want the Back Button to do a similar thing!I keep getting External Swf pile-ups or flickering
Here's my code:
[CODE]
Play_button1.addEventListener(MouseEvent.CLICK, Play_btn1);
[code]........
I am working on a few websites at the moment, one of the being my online portfolio, as well as my website for a sleep product I am trying to sell. I have very little experience with AS3, last time I created a website AS2 was used. I've tried a few online tutorials, but nothing gets the job done, there is always some error..I have a index.swf which loads the default home.swf.There is also an about.swf, contact.swf, order.swf, and All I need is for the external swf to pull up when the corresponding button is clicked, and when the next button is clicked, for the current swf to unload and the new swf to load. This was so simple with AS2, one would think things might be as simple if not easier.
View 9 RepliesI have created a main "site.swf" file that loads a "default.swf" file into a container after a preloader. On this default.swf file I have buttons that needs to load new external SWF files in its place in the container. All of the external SWFs contain buttons and navigations that will also call up other external SWFs into this container. So, I would like to know how to program each button (some are movieclips as buttons) to unload itself and load the respective SWF into the container (eg. AboutUsButton to call up aboutus.swf into the container). I do not have a main navigation on the site.swf file bacause the navigation changes on each SWF that needs to be loaded into the container.
View 2 RepliesI have an empty movie instance called 'contentClip' sitting in an swf called 'middle' on the main timeline. I have a number of buttons to call external swfs into the contentClip but I'm struggling with the exact script. I am creating a fluid layout so I am using an actionscript file to place the header, footer and middle sections. The script I have for the buttons follows but my poor knowledge is creating a new instance rather than filling my contentClip instance.
[Code]....
I have a project that requires around 20 external swfs. All of these swfs get called into a _root via XML. Each swf (contains a video swf and some graphics/text) has a progress bar and a playhead that is monitored by using a setInterval(). Once the progress bar is complete, the interval gets cleared.
However, if a user wants to watch a new video before the progress bar gets cleared, the video swf won't load, although all the text and static graphics that are in the swf file will. I think it may be an issue of the interval not clearing, because if the progress bar is completely downloaded and then a new swf is chosen, the video swf loads fine. Can I use clearInterval() from the _root of my movie to clear the setInterval from my external swf?
PS -- I tried to solve this issue by using removeMovieClip() in my _root, and that worked really well on everything but IE 5.2 for Mac?
I'm trying to create a site which loads external SWFs into a Moviefor its content, and the entire site is contained in a Movie Clip located on the main timeline.
I keep getting a 1009 error, so I'm assuming that AS isn't drawing the loader where I want it to be, so I'm fairly certain I'm doing something wrong..haha.
Here's a link to my Files: [URL]
i am working on a project where i require to load an external swf movie in a container at frame3 when i click on a button at frame1..and at he same time the movie should fit exactly into that container..and at the end of the movie it should bring back me to the frame1 where all my buttons are there..another thing is my first frame of the external movies which i have to load is blank so i want to load a movie directly from frame2i have tried several things but everythng is not working at he same time..
View 3 RepliesI am working on a project where I require to load an external swf movie in a container at frame3 when I click on a button at frame1. And at he same time the movie should fit exactly into that container. And at the end of the movie it should bring back me to the frame1, where all my buttons are there. Another thing is my first frame of the external movies which I have to load is blank so I want to load a movie directly from frame2 or a specific frame.
View 1 RepliesI have some buttons that load an external flash file into the container movie clip with this code:
[code]...
So it plays the tweening out animation of the file that's already loaded, then loads the new file, playing the tweening in animation. However, currently the container movie clip is empty when the flash movie is played. I want to be able to have some content already loaded in it, but when I use the container .loadMovie("start.swf") code, it just keeps loading start.swf into it when any of the other buttons are clicked. Is there a way I can have content load when the flash movie is started, but when any of the buttons are clicked, for it to tween out, and basically, never reappear?
I have attached two pictures. Basically I am making a website. The main navigation loads in external swf's through a container movie. For this I have used this tutorial : [URL]. What I want to do is- when you rollover the navigation bar, be it the text or the coloured block- I want it to scroll down and reveal the 'sub navigation'. (pic2) It's like a drop down menu but kind of the other way around. Then, when you either rolloff of the navigation bar or click on a menu button, it slides back up to its original state. (Pic1). I have played around and only managed a sloppy version which doesn't work very well, especially when you resize. I think a simple answer to this is if I could get my buttons to work inside a movie clip. I had tried this but then the swfs wouldn't load properly.
View 3 Repliescan someone give me the AS for loading external swfs into a movie? the swf name is slideshow.swf. (i am trying to load a slideshow into the movie using AS so that when the keyframes his the "stop();" function, the slideshow does not stop) or is their a better way of accomplishing this?
View 1 RepliesI've created a main page with my main links on top, and a container as my body.I load my pages with this action to the container.
on (release) {
if (_root.currMovie == undefined) {
_root.currMovie = "production";
container.loadMovie("production.swf");
[code]....
Inside the production.swf files I've created a gallery with a MovieClip that loads from my library to a container1 inside the production.swf. In the galleryMC(from library), Ive created a close button to unload it from the container1. It works fine from my production.swf file, but when it loads to the main page it doesn't unload. This is the ActionScript that I have to unload the Movie Clip.
on (release) {
this._root.container1.unloadMovie();
}
i have main swf that loads external swf, here is the main FLA. the animation begins and stop at frame 71:
frame 71: there is empty movie clip with instance name container, this code in frame 1:
ActionScript Code:
var currMovie:String = "section1";
[Code].....
at this point, it loads sec1.swf, but when i click to load other swf, it will not respond.
I'm writing a preview site that will load SWFs/images from a URL into a preview pane. However, the primary problem I'm running into is actually loading these SWFs. It seems that the object/embed tags require width/height attributes. I will not know the exact size of these SWFs; in fact, I will know absolutely nothing about them.
What I'm asking is, what is the best way to load in these SWFs? Is there a library that exists to do this? Or do I need to do it myself?
I have been trying endlessly to find a solution for a problem. All I want to do is to be able to load a loader container on to the stage and swap out each swf by hitting the corresponding btn. I found a code to do this and it works on static swfs but when I link xml photogallery swfs to it I get all kinds of output errors but the functions work in a browser. I know it is the code as I have tried 4 different kinds of xml photo galleries and all return similar output errors.
I know this is a bit of a pain in the @#$ but if someone could have a look at the zip file in the link below which contains a main.swf, an swf folder and one swf inside including all the xml. You will see what I mean. What I really need to acomplish is to have a set AS3 code for doing this, I'm sure a seasoned AS3 pro could look at the code in the file and see why I get the errors or I'll even settle for a code that works. I'm the kind of person that likes to know why something doesn't work and when it works I like to know how as well. This is one of the reasons I've been knocking myself out for days as you will see posts of mine about this.
zip file link is here
[URL]
I spent almost a week trying to figure out how to unload a currently loaded swf using its button and loading a new swf... I have three files, a main.fla, file1.fla and file2.fla. In my main.fla, I have a code which loads the other two files. If i will click the "unload" button in the file1.swf, I would like the main.fla to unload the file1.swf and load the other file, file2.swf. Here is the code to load the file1.swf:
[Code]....
I used to do this fine with AS2 and now i'm struggling to get it to work in AS3.my code is as follows:
PW1.addEventListener( MouseEvent.CLICK,loader1 );
//==================== PS function =============================================
var ldr:Loader = new Loader();
[code].....
I have a main fla file which loads an external swf into an empty movieclip on the main timeline which works fine but I want a button in the external swf to load another external swf into another empty movie clip on the main timeline.eg. start.swf loads UKEIAMap.swf into (empty movie clip within start.swf) MapLoader_mc then a button havant_b within UKEIAMap.swf needs to load HavantProjectSheet.swf into (empty movie clip within start.swf) ProjectSheetLoader_mc without unloading UKEIAMap.swf
View 3 RepliesI'm trying to load an external swf and unload it after its completion. I have tried a few things and am stuck. Here is my current code to loading the swf, which seems to be working fine, its the unload I cant get:
import flash.net.URLRequest;
import flash.display.Loader;
import flash.events.Event;
import flash.events.ProgressEvent;
function startLoad() {
[Code] .....
I have a external swf that has an embedded video that loads automatically. Once it loads I have a button that unloads it and reloads. The first time I unload it, it works fine. The second time the video unloads but the sound continues? This happens each time I load and unload; the sound continues to loop.
stage.scaleMode = "noScale";
var loader:Loader = new Loader();
var defaultSWF:URLRequest = new URLRequest("swfs1/ME_video1a1.swf");
[Code]....
I am slowly learning AS3 but have hit a bit of a brick wall though I am sure it is something that many will see as easily resolvable, just my lack of knowledge and understanding of AS3 at this moment.
My query is I am trying to create a SWF which loads in (3) external SWF's using three movieclips I have within the main SWF. I have managed to get the external SWF's (1.swf, 2.swf, 3.swf) to load in when each of the movieclips / AS3 buttons have been clicked but I cannot figure out how to unload the current selected SWF file (e.g. have initially click on btnOne which displays 1.swf yet when click on btnThree to display 3.swf, 1.swf has not been removed from the stage and overlaps 3.swf) when I want to load another SWF file (sorry if this does not make sense). Below is the test code I have tried:
Code: Select all/////////////////////
///////Loaders///////
/////////////////////
//One
[code]....
My question is how do I unload (or removeChild I guess) the current SWF from the stage when I click on another movieclip / AS3 button to load another external SWF without the mish-mash as can be seen in the uploaded test files?
I am Using Flash MX ActionScript.
Anyways i have a series of buttons, and I would like them to each load a external SWF file into a movieclip. I have accomplished this so far but, I would like it so that whenever I click a button it unloads any already loaded SWF file that is already there. This is what I Have So far
on (release) {
loadMovie("movie.swf", this.movieholder);
}
I am loading an external swf file into my main swf movie with a button. But I donot know how to unload it. Here are the scripts.
on (release) {loadMovie("Main content.swf","Main1");
}
Main1 = the holder on the stage
I am studying AS3 by myself, It's all about loading and unloading external swf's. My code is working perfectly though I just have some questions about load and unload issues. I have three buttons on the stage and it should load its external SWF
[Code]...
Each of the button should load it's external SWF's intro when click. My problem is that I don't know how to command the button to play the swf's outro and then load the next swf everytime I click a button Example: When I click homeButton_btn, the external swf should load "home.swf" and then if I am going to click page1Button_btn, the outro of "home.swf' should play and then once it reaches the end of it's timeline, it should load "page1.swf". Same goes with page2Button_btn, whatever swf that is on the stage should play it's outro first and then load "page2.swf" My questions are:
1. How can I control the external SWF to play it's outro and then load the next SWF.
2. What code should I put at the end of the external SWF's timeline.
3. Where do you think I should put the preloader? Is it better to put it at the external swf timeline? or on my main swf timeline?
4. Does load and unload of external swf also work with movieclips? Like for example I will not use a external swfs, instead I will use movieclips to load and unload its content.My Actionscript 3.0 code
[Code]...