ActionScript 2.0 :: CS3 Buttons In Loaded Swfs Loading Other External Swfs Into The Main Timeline?
Sep 11, 2009
I have a main fla file which loads an external swf into an empty movieclip on the main timeline which works fine but I want a button in the external swf to load another external swf into another empty movie clip on the main timeline.eg. start.swf loads UKEIAMap.swf into (empty movie clip within start.swf) MapLoader_mc then a button havant_b within UKEIAMap.swf needs to load HavantProjectSheet.swf into (empty movie clip within start.swf) ProjectSheetLoader_mc without unloading UKEIAMap.swf
View 3 Replies
Similar Posts:
Aug 7, 2008
I just don't know how to target it. I'm trying to load an external swf, when releasing a button. The problem is the button is not on the main timeline, but instead nested in a movie clip. I just don't know how to target that button. I tried loading the swf with a button on my main timeline and it worked, so I know the problem is not with the movie clip loader class or the actual swf itself. I actually learned this from a note midway down the page in one of your tutorials..... [URL] how can i target that button that is nested in that movie clip?
[Code]...
View 2 Replies
Feb 14, 2008
how to sequentially play external SWFs loaded into the main timeline?
I have several SWF files with short videos embedded in them. I wish to load these external SWF files into my main timeline as follows:
User Presses Button -> Play Video Clip in External SWF#1 -> Once Video Clip in External SWF#1 has Finished -> Play Video Clip in External SWF#2.
I tried achieving this by adding: var endmovie:Boolean = true; to the end of each video clip inside the external SWFs (e.g. 1.swf) then cycling through an if statement in the main timeline to see when this condition was meet:
ActionScript In Main Timeline:
Code:
var mc_Loader = new MovieClipLoader();
mc_Loader.addListener(this);
[Code].....
How is the best way to go about achieving this? Am I on the right track? (By the way, using .FLV or one long external SWF file is not really an option due to long loading times...
View 3 Replies
Feb 4, 2010
I have bought a gallery template that allows me to place content within external SWFs.I have a series of buttons within the SWF templates. The problem is that the buttons are interefering with the main timeline when hit. How would I fix this.
Currently they read:
on (release) {
_root.gotoAndStop(1);
[code]......
View 2 Replies
Jun 26, 2011
I've been trying to combine the features of two tutorials I found, one that deals with controlling external swf's from the main timeline and the other that explains how to load and unload multiple external swf's. I'd like to be able to load and unload multiple external swf's, and control these swf's buttons from the main timeline
I asked this same question on the forum of the site where I found these tutorials, and receive only one reply saying that "it shouldn't be hard to do." but they did not elaborate any further. This left me think that I was missing something very obvious and I've spent too much time now trying to work what it is now. I understand pretty much how both pieces of code work, but just can't work out how to combine them.[code]...
View 16 Replies
Oct 14, 2003
im using a load targetscript to load external swfs into the main timeline of my movie, however im keeping much of the other layers/mc's loaded, and the external swf is loading over them, the level the blank movie clip is created in doesnt seem to be working propperlly?? whats going wrong?
bandb.onPress = function() {
_root.createEmptyMovieClip("empty2", 4);
loadMovie("flash/band.swf", "_root.empty2");
container._x = 0;
[Code]...
View 4 Replies
Oct 14, 2003
im using a load targetscript to load external swfs into the main timeline of my movie, however im keeping much of the other layers/mc's loaded, and the external swf is loading over them, the level the blank movie clip is created in doesnt seem to be working propperlly?? whats going wrong?
[Code]...
View 4 Replies
Jul 8, 2010
Is it possible to control a movie clip in an externally loaded swf from a button in your main swf? I have 4 buttons in my main swf. In the externally loaded swf there are 4 movie clips all with their alha set to 0. What i'm trying to do is when the user clicks button 1, movie clip 1 one the external swf changes its alpha to 1. Then if you press button 2, movie clip 1's alpha returns to 0 and movie clip to 2's alpha changes to 1.
The, buttons need to be in the main swf as there are over 20 externally loaded swf all with 4 movie clips and I cant make those four buttons in each swf and also, the 4 buttons are intergrated into the graphics on the moan swf.
View 7 Replies
Aug 31, 2009
I'm building a website that loads multiple swfs within one main swf. I would also like some swfs to unload when i click on the button situated on it. Currently I'm only able to load one swf with this code, can I somehow load more that just one swf by default? you can see the code below:
[Code]...
View 3 Replies
Jun 12, 2009
I'm building a website that has a main swf with buttons that open external swfs which completely cover the main swf. The external swf has a close button to return to the main swf. My problem is when the external swf is open the buttons hiding underneath on the main swf are still active. I want to add code to the button on the main swf to disable itself while opening the external swf. BUT, I also want to reactivate them when I close the external swf. Is there code I can place on the close button of the external swf that will communicate to the main swf to reactivate its buttons? It seems so simple but this is the trickiest part for me.
View 2 Replies
May 4, 2011
I have created a main "site.swf" file that loads a "default.swf" file into a container after a preloader. On this default.swf file I have buttons that needs to load new external SWF files in its place in the container. All of the external SWFs contain buttons and navigations that will also call up other external SWFs into this container. So, I would like to know how to program each button (some are movieclips as buttons) to unload itself and load the respective SWF into the container (eg. AboutUsButton to call up aboutus.swf into the container). I do not have a main navigation on the site.swf file bacause the navigation changes on each SWF that needs to be loaded into the container.
View 2 Replies
Aug 2, 2006
Flash - 8 : Above is an example of what I would like to do/have done. I've gotten as far as loading the "loaded.swf" into the "start.swf" but my problem is I'd love to use that little loading action I made earlier without copying and pasting into the new movie the same actions for a different link. So, how do I load "loaded2.swf" into "loaded.swf" via the link in "loaded.swf"?
View 1 Replies
Feb 12, 2010
The problem is this: I am loading 4 external SWFs into an empty MC on the main stage for each of the 4 projects.So you press a button on the main stage for a project, and it loads that specific SWF.These SWFs contain an opening text for each project, a button to "continue" to the gallery, then the text fades out and the gallery loads.That's all within the SWF itself.The SWFs work fine on their own, but the problem is that when I load the SWFs into the empty MC on the main stage, the "continue" button doesn't work correctly The SWFs load fine, it's just the button At first when I pressed the button it would send my main stage back to the first frame, so I thought it was because the AS for the button in the SWF was probably conflicting with the main stage and confusing it. I went back into the SWFs and tagged part of the SWF timeline with the name "togallery" so that when you click the "continue" button, in theory, Flash knows specifically where to go within the timeline of the SWF and not the timeline of the main stage.
That hasn't worked either. The button just doesn't work at all now, at least not when the SWF has been loaded onto the main stage. Again, it works fine on its own. So what can I do? How can I get a button within an external SWF to reference only it's own timeline and not that of the main stage?
View 1 Replies
Aug 17, 2009
Flash CS4 Actionscript 2.0 internal training project Main movie is a single frame project, containing just the interface. This includes a menu listing 80+ individual "chapters" for the training series. Each "chapter" that loads is its own project/swf of varying lengths. Once the main interface loads, it should automatically begin to play the chapters sequentially without the user selecting anything from the menu. When one chapter finishes, the next should load. If the user DOES select a chapter in the menu, it should load that SWF, and continue auto-playing from that selection forward.
- Each chapter swf has a built-in play/rewind/ff bar, various movie clips with animations, dialogue audio track and a fairly lengthy embedded FLV movie, and therefore a preloader before each chapter is mandatory.What I have so far works, but it's embarrassingly crafted my lack of AS skills:- First frame of main interface movie (let's call this main.fla) contains the following code:
var slideName = "modules/00.swf";
var loader:MovieClipLoader = new MovieClipLoader();
loader.addListener(this);
[code]....
View 0 Replies
Feb 23, 2011
I am loading swfs into a movie clip. However, the contact button is not a loaded swf any longer. It's in the main flash page. This is what I want to do. All the buttons load the external swfs except when I click on the contact button that is in the main flash page. I need to get the other buttons to load after I click the contact flash button. Below is the code for the contact button and the one under for one of the other buttons.
[Code]....
View 3 Replies
Jun 4, 2006
I basically made movie clip buttons to navigate through my site, has sounds and all...now all i need those buttons to do is to call out a .swf file from a certain directory. I know how to do this with the traditional button, but not with a movie clip button since it requires a function. This is what I have tried and failed with so far:
// PROFILE SECTION BUTTON //
this.profile_mc.onRollOver = function(){
profile_mc.gotoAndPlay("_over");
[code]....
View 3 Replies
Jan 9, 2012
I am working on a few websites at the moment, one of the being my online portfolio, as well as my website for a sleep product I am trying to sell. I have very little experience with AS3, last time I created a website AS2 was used. I've tried a few online tutorials, but nothing gets the job done, there is always some error..I have a index.swf which loads the default home.swf.There is also an about.swf, contact.swf, order.swf, and All I need is for the external swf to pull up when the corresponding button is clicked, and when the next button is clicked, for the current swf to unload and the new swf to load. This was so simple with AS2, one would think things might be as simple if not easier.
View 9 Replies
Sep 2, 2006
[URL]regarding this tutorial I started my site [URL] to get some trasition effects but im getting somewhat different since the external SWFs take time to load. isn't it better to create "intro and outro" on the same time line instead of loading external SWFs bcos once the movie loaded as a whole will lead to smooth and contineous transitions.
View 1 Replies
Nov 13, 2010
I am loading eight external swfs by way of eight buttons with actionscript to remove the swfs and sound after a new button is clicked. This works fine except that as soon as you get to the frame where the actionscript is all the swfs load at one time on top of each other. I don't want any to load until the button is clicked for the right one. MouseEvent listener works but only after all the swfs have loaded. How do I get the swfs to load only when the buttons are clicked. I can't figure out what I am doing wrong.
[Code]...
View 5 Replies
Jul 25, 2011
I am trying to load multiple swfs (one at a time) using one loader and pause/play the loaded swfs using a button. I have gotten the swfs to pause/play, but all except for one will delete itself upon resuming. I made the loaded swfs in Captivate. Each Captivate swf is made up of multiple Flash swfs, each on its own slide. When the swfs delete, they only delete the currently playing slide's swf and then the next slide's swf will appear and play when the timeline advances to it (but will also delete if paused/resumed), but the playbar will show that the swf has been successfully paused and restarted and will continue along with no swf showing.
Here is a short version of my code (becuase the original has 8 swfs to choose from):
function(){return A.apply(null,[this].concat($A(arguments)))}//HERE STARTS THE ATTACHMENT BUTTONS REFERENCING FROM THE mainMC
var ansaldoButton:DisplayObject =
[Code].....
View 1 Replies
Nov 2, 2009
I have a set of SWFs loaded, and have successfully added them to the stage, and can assign basic methods ( gotoAndPlay(), stop() etc..) based on MouseEvents. I can't quite figure out, however, how to assign methods based on frame number or label, triggered by labels on the currently playing SWF timeline. So, for example: externally loaded swf starts playing, and a listener is set up to listen for a "stop" label, which would activate stop();I can obviously just drop a stop(); in the timeline of the loaded swf, but I am really trying to banish all code from timelines, period.
I could set up a frame-based listener to decide if a label exists at the current frame, and then to evaluate if that frame label == "stop"... but that seems pretty messy, and because it has to run at every frame, CPU heavy...So - the question is really about listeners, I guess. What event would I listen for? Something like a MouseEvent - but ... a LabelEvent instead Obviously - this doesn't exist, but something like it would be perfect. tions scattered here and there isn't that big of a deal
View 3 Replies
May 7, 2009
I was trying to get two swfs loaded into a main swf to control each others timelines. This is what I've tried out:
Code:
Select allpackage{
import flash.display.MovieClip;
import flash.display.Loader;
import flash.events.*;
import flash.net.URLRequest;
import fl.transitions.easing.*;
import caurina.transitions.Tweener;
public class LoadTest extends MovieClip{
[Code] .....
View 1 Replies
Jan 11, 2010
I have a project where I am externally loading .swfs into my main scene. However at the end of my external .swfs I want it to go back to the first frame of my main .swf. I have used this code MovieClip(root).gotoAndPlay("start"); but I get this error
ArgumentError: Error #2109: Frame label start not found in scene Scene 1.
and I understand why I get the error because the frame label start isn't in that external flash file it is in the main one. However, I just don't know the correct AS3 to get this to work properly.
View 6 Replies
Aug 15, 2005
I recently created a site using the "Transitions between External SWFs" tutorial for Flash MX 2004. I use this to load the sections of my site into the main movie file. Each section is an External SWF file. When a viewer clicks on a navigation button, the specific external swf move will load and play. Currently, a viewer would need to click on another navigation option to close the current external swf file. I would like to add a close button to each of the external swfs so that a view has the option to close the window without clicking on a naviagtion link.
View 12 Replies
Feb 25, 2010
Here is what i am doing:maintimeline 1:frame 2 I have loaded 1 external swf A and 2 textfields.on 2nd timeline (which is on submenu navbar_mc) i am loading a different external swf and want to remove external swf A and textfields that are showing from the main timeline.[code]...
View 4 Replies
Feb 15, 2010
I'm having a few issues controlling the timeline within an externally loaded swf.
View 0 Replies
Jul 29, 2004
I read the tutorial about timelime transitions between external swfs and it works perfectly on in flash but when loaded on the web it doesnt work at all.
Was wondering why this is.
I embedded the button code from the tutorial in my script for the xml menu I am using and it works in flash flawlessly but when I push it to the web on my server it doesnt work at all.
View 8 Replies
Sep 3, 2009
My external swfs are taking 8-10 secs gap in loading inside main swf, that's why i want to load my external swfs with dynamic content at the same time when my main swf loads.
Code of preloader
Code on 1st frame:
onClipEvent (load) {
total = _root.getBytesTotal();
}
[Code].....
View 3 Replies
Jul 24, 2009
I have made a presentation in flash AS2. I have a main.swf and 14external .swf files and each has its own preloader.
I want that when main.swf plays, the external swf should starts preloading sequentially so that the presentation will run smoothly.
View 3 Replies
Jan 3, 2011
figure this out I am using this code inside my nav movieclip to load external movie clips on the main stage
Code:
var Xpos:Number = 110;
var Ypos:Number = 180;
[code].......
View 3 Replies
