ActionScript 3.0 :: Loading External Data With Sync Mode?
Jan 12, 2009as i understood, external data loads with async mode. Please, suggest me good way to get sync mode
View 9 Replies
Similar Posts:
ActionScript 3.0 :: Loading An External Swf That Contains A Flv In Fullscreen Mode?
Nov 3, 2009I have am having a bit of trouble. I am trying to run a flash presentation in fullscreen mode that loads and unloads several external swf files when you click on different buttons around the stage. There are no problems at all if you are not in full screen mode. As long as none of the external swf files have a flv playback instance they play fine...there are 2 files that have flv movies playing in them. When the playhead gets to the keyframe playing them the screen goes to black and the entire presentation locks up even though I have
subFLV.fullScreenTakeOver = false;
in the actions for the external swf file (subFLV is the name of the flvplayback)
I have also tried
this.subFLV.fullScreenTakeOver = false;
I'm not sure how to force the flvplayback in a child instance of a movie to not take over the screen. Any ideas? Or have I talked myself into a circle again..
How To Sync Swf And External Flv
Jan 27, 2010I'm a total novice and I think I can't find an answer to this question because it is so basic. There are all kinds of tutorials on FLVPlayback, streaming video from a URL, etc.,but nothing I can find on how to make it play nice with the rest of the flash animation in my .swf. I assume this is a matter of simple actionscript (AS3), but my ignorance is profound.
So . . . I've got a flash animation that leads into a gotoAndPlay button, which references the frame where my video starts. The video, streaming from my url, plays fine, but if it takes a moment to buffer, the main timeline in my .swf just continues on through the frames I've created for the length of the video. Since my intention is to have the video finish and loop back to the intro. animation, ending with the play button displaying again, what happens is that it loops before the video is done playing, leaving the audio still streaming but the viewer staring at the play button. In other words, if there is no lag time for buffering, the number of frames before it loops is enough for the whole video. If it lags for buffering, it cuts off part of my video, prematurely looping to the intro.
Actionscript 3.0 :: Sync Swf Timeline With External Flv?
Jan 26, 2010There are all kinds of tutorials on FLVPlayback, streaming video from a URL, etc., but nothing I can find on how to make it play nice with the rest of the flash animation in my .swf. I assume this is a matter of simple actionscript, but my ignorance is profound.
So . . . I've got a flash animation that leads into a gotoAndPlay button, which references the frame where my video starts. The video, streaming from my url, plays fine, but if it takes a moment to buffer, the main timeline in my .swf just continues on through the frames I've created for the length of the video. Since my intention is to have the video finish and loop back to the intro. animation, ending with the play button displaying again, what happens is that it loops before the video is done playing, leaving the audio still streaming but the viewer staring at the play button. In other words, if there is no lag time for buffering, the number of frames before it loops is enough for the whole video. If it lags for buffering, it cuts off part of my video, prematurely looping to the intro.
Is there a way to sync the two playheads, so to speak, so that the .swf doesn't continue on when the video is paused?
Data Integration :: Loading An External XML
Jul 21, 2006Is there a way to load an XML file if it's on a differen server/domain than the html/swf file? I already set allowScriptAccess="all" but it didn't seem to help.
View 1 RepliesActionScript 3.0 :: Loading External Data XML Or CSV?
Jan 15, 2009Having done loads of it in the first few years of this century, I've not done much Flash in the past few years, been focused on PHP/MySQL Development. Anyway, I now need to use the data from a MySQL database offline in a Flash executable so I'm jumping back in with AS3. There are several tables involved and I can write a script to export the data to whatever format is best.
XML or CSV? Should I get it all into one file with all the data or is it possible to do the quivalent of joined queries once the data is in Flash? I don't need a full explanation at this stage,
Actionscript 3.0 :: Loading External XML Data
Apr 19, 2010I built a simple application to load XML data using a external XML file. However, the link I am using will have a different Presentation ID each time a user creates a presentation. So some how the presentation ID needs to be know before I actually load the XML file at least in my mind it does. Is there a way to load the URL dynamically or set my url loader up so it loads whatever ID there is?
[Code]...
ActionScript 2.0 :: Loading External Data?
Jan 13, 2006I have an external text file that will have two variables and look like this:&months=January,February,...&days=Sunday,Monday,.. .I am using loadVars to load the textfile in. When it is done loading, I want to load each of the of the 2 variables into an array so I have an array for months and array for days
View 7 RepliesActionScript 2.0 :: Loading External Data (MX)?
Jun 7, 2006Ok, lets see if i can explain this right. I have been trying to make a movie that loads different information from an external file each day. I name the external files according the the date that i want it to be imported (example: 200667, for today)Ive been able to make the .getYear(), .getMonth(), .getDate() work to make the date in the above formatxmlData.load(" ");<-- now when i write in the url to load the external file is there a way that i can write it so that it will update itself to the correct date so that i dont have to update it manually myself?
View 2 RepliesActionScript 3.0 :: <b>loading External Data With For Of XML</b>?
Mar 16, 2009I have a pretty CMS that generates an XML and I want to make part of the site loading that data (menu items, thumbs, info, and big pics) is there an way to make all that using for?here is my XML code
Code:
<albums>
<gallery id="1" name="design" path="gallery/1/">
[code]......
ActionScript 2.0 :: For Loop For Loading External Data?
Jul 28, 2009I have a bit of a problem finding the correct syntax. I have a whole lot text variables here. The myLV value is in a external text file. So myLV.nr1 from my external textfield is loaded in ovrnr1.text. This way I can easily change the value in my text document.
ovnr1.text = myLV.nr1;
ovnr2.text = myLV.nr2;
ovnr3.text = myLV.nr3;
ovnr4.text = myLV.nr4;
If I put it like this it works fine but I thought, hey, in stead of writing
150 of these I can put it in a for loop. So I tried this.
for (i=1; i<150; i++) {
ovnr[i].text = myLV.nr[i];
}
However, this does not seem to work ? And could I do it to a button too ? So instead of writing 150 button onrollovers I could also make a loop for it ?
Something like
for (i=1; i<150; i++) {
this.btn[i].onRollOver = function() {
[Code]....
ActionScript 3.0 :: Loading External Data Not Working?
Feb 7, 2011I have a listBox and I want to take data from a php file and insert it in my list box. But I am doing something wrong, because it's not working.
The php file retrives data in the following format:
echo "nrsongs=" . $nr_songs;
$i=0;
foreach($song_ids as $song_id){
$i++;
[Code].....
ActionScript 3.0 :: Loading External Data (dynamically)?
Jun 21, 2011I am trying to load dynamic data into text fields with in flash (.swf) the system is a closed circuit (no internet & web access) basically there are about 10 standalone computers connect through a network and one central computer i created a flash which will be downloaded to all the computers at once and each computer has a unique (name).My goal is to load the different data into the text field for each computer:Computer 1 would have winner 1 Computer 2 would have winner 2and so one........Steps the code should do..1. call function and load the "unique (name)."of the computer by going to("c:/myharddrive/local.ini"); flash will reconize the "ini file to say "this is computer 12. then have the txt request come from("c:/CMS/MediaFiles/Data2.txt");when i publish the file out there is no errors-When I view the files on each computer there is no data (blank screen")so my guess it is not seeing the path for newURLRequest("c:/myharddrive/local.ini");r new URLRequest("c:/CMS/MediaFiles/Data2.txt");can anyone breakdown the code and let me know how flash can go to those specific areas on each individual computer and pull the data into flash
View 1 RepliesActionScript 3.0 :: Xml Data In External Domain Not Loading?
Jun 26, 2009[URL]when i test the site on my computer with flash it works. when i upload to the internet the xml data is not picked up. when i had the xml data in the same subdomain it worked both on my computer and in the internet...but i need the data to be accessible...
i have tried adding cross domain "policy files" for permission, but either they are not working, or i am doing it incorrectly...
ActionScript 2.0 :: Loading Data From External .txt File?
Oct 26, 2009i have been given two sources for a weather data feed:
[URL]
i would like to 'load' the text similar to loading xml i have seen several articles on reading variables from .txt but they all suggest the .txt file needs more formatting - whilst this one is just seperated by lines.
ActionScript 2.0 :: Cancel External Data From Loading
Aug 29, 2009I am having a problem with loadMovie(); I have a button that loads external SWF into a container, but when another button is released loading a different SWF into same container, that SWF twitches and doesn't load properly.Is there a way to cancel an external SWF from loading during the load process? Or is there an easier way to prevent this using onLoadProgress(); with a while loop?And I am some what new to listeners and loadProgress(); programming
View 4 RepliesFlash :: IDE - PHP And MySQL - Loading External Data Into An SWF
Jul 5, 2002it took me so long to write this tutorial Well, here I go... Section 1: Introduction So you want dynamic content on your Flash movie. Sounds simple, right? Well let me tell it is, and well, it isn't. This tutorial assumes a basic knowledge of Actionscript, PHP and MySQL. If you have that, it's time to move on. Otherwise, I recommend you do some reading on the subjects... Section 2: Setting up your SWF to receive external data Loading external data into an SWF is a fairly simple task. Although the external text file method is probably the most widely known, it is by far the clumsiest way to get data into your SWF. Of course, this may be your only option of your server doesn't support MySQL/PHP! But for those of us who are fortunate to have these privileges, let me show you how Flash can get external data without having to create additional text files.
Dynamic text fields In order for Flash to get data from an external source, you need to make use of dynamic text fields. Simply place a blank dynamic text field on the stage and make sure you give it a variable name (NB: dynamic text fields have both an instance AND a variable names. In this case we want to focus on the variable name). Note the name you give to the field's variable name, as we'll need it when we write our PHP script. Once you have a text field setup, convert it to a movie clip symbol. Attach the following code to the resulting movie clip:
[Code]...
Javascript :: Is External Interface In Flash Async Or Sync
Jan 10, 2012I will call flashObject.httpRequest to complete a http request via flash. The problem is there is no reference about httpRequest is an async method or sync. It is important for my application.
private function httpRequest (uri:String, param:String="", method:String="GET"):void
{
var
[Code]....
Flash :: IDE Internal Cache When Loading External Data?
Aug 12, 2010When retrieving external variables from the server URLVariables my Flash get stuck on first compilation values. Whenever I update server values flash compiles the first old values. Only after i restart CS4 IDE values are updated. Is there an internal cache?
There is nothing wrong with my code, because it works fine on my mac, but not on pc.
ActionScript 2.0 :: Loading External Data (large Amounts)?
Dec 12, 2007What is the best way to work large amounts of external data in Flash? XML, remoting,something else??I'm looking into a project that has a lot and I'm not sure what the best way to handle it would be
View 1 RepliesActionScript 3.0 :: Loading Variable Data From An External Text Doc?
Nov 16, 2009spot the error here that is giving me a TypeError: Error #2007: Parameter text must be non-null.The text field captions are in a file named captions.txt in the same root folder.
Code:
var myURLLoader:URLLoader = new URLLoader();
var myURLRequest:URLRequest = new URLRequest("captions_tuesday.txt");
[code].....
ActionScript 2.0 :: Loading Array From External Data Source Possible?
Aug 13, 2004Possible to load an array from a external data source. I.e. like from a .txt file? I tried putting this in the external text file:
mytest = new Array("dadada")
It loaded, but not as a array, just as text. I am using LoadVars.
ActionScript 2.0 :: External Audio Not In Sync With Text/screen On Windows XP?
Sep 23, 2011I created a Flash program that utilizes audio and text. The audio is located in an external folder and is loaded using .loadSound(). The text is located on the timeline and appears based on a certain time in the audio. I have a pre-loader that looks to ensure all of the external audio is loaded before the user can move onto the appropriate screen and the audio would play. This is using a combination of the .getBytesTotal and .getsBytesLoaded.
It works fine on Windows 7 but doesn't seem to be working one particular user's Windows XP on IE 7 (So it's not happen on all Windows XP). On a particular user's computer, the text is slow to load while the sounds loads pretty quickly leaving the text out of sync. After a few screens, the text will catch up with the audio.
ActionScript 3.0 :: Loading External Data To An Array Syntax Error?
Jan 25, 2009I'm trying to load data from an external text file into an array. I created an array and am able to load the data into an array if I explicitly say something like
ActionScript Code:
array[0] = event.target.data.uid1_name;
I can then do a trace statement on array[0] and it will output the correct name from the file. My problem is I'm trying to iterate through the variable names in the text file in the file by using an index variable. This is the code I'm using after doing all the URLloader, URLRequest, and so forth stuff:
ActionScript Code:
for(var i = 0; i<20;i++){
fArray
= event.target.data.uid_name;
}
This produces a syntax error. I've tried several other syntax variations but haven't been able to figure it out. I've also tried the following:
fArray
= event.target.data["uid"+i+"_name"];
fArray = event.target.data.["uid"+i+"_name"];
fArray
= event.target.data."uid"+i+"_name";
All three of those also give me errors. For the first one the trace statement outputs "undefinded" instead of "Doug". For the second I get "syntax error. Expecting identifier before left bracket". And for the third I get "syntax error, expecting identifer before uid.":
syntax to iterate the number after uid(uid1_name, uid2_name, uid3_name, etc)?
ActionScript 3.0 :: Loading External Data To Array (Syntax Error)
Jan 24, 2009I'm trying to load data from an external text file into an array. I created an array and am able to load the data into an array if I explicitly say something like:
ActionScript Code:
array[0] = event.target.data.uid1_name;
I can then do a trace statement on array[0] and it will output the correct name from the file. My problem is I'm trying to iterate through the variable names in the text file in the file by using an index variable. This is the code I'm using after doing all the URLloader, URLRequest, and so forth stuff:
ActionScript Code:
for(var i = 0; i<20;i++){
fArray[i] = event.target.data.uid[i]_name;
}
This produces a syntax error. I've tried several other syntax variations but haven't been able to figure it out. Why syntax iterate the number after uid (uid1_name, uid2_name, uid3_name, etc)?
ActionScript 2.0 :: Absolute Links - Loading External Data Into MovieClip
Oct 27, 2009I have a flash movie that connects to xml, php etc and uses absolute path. The file works perfectly fine on any browser on my mac but doesn't work at all if I am using my windows (none of the browsers seem to be working)
This is the way I'm loading stuff:
editorXML.load"); [URL]
}
I don't know now, maybe I should use ' instead of " for this example.
Swf Automatically Loading Up In Full Screen Mode?
Jul 30, 2009Is there a way in AS3 to load the .swf to full screen mode straight away? The only way I can find to do it is by adding an event listener for the mouse or keyboard. Surely this can be done automatically at the start when the .swf is loaded?
View 1 RepliesActionScript 3.0 :: Dynamic Textfield - Unable To Type Data In FullScreen Mode
Nov 3, 2010I have some problems using dynamic textfields, spent hours to get it fixed but nothing works. Here's the problem. I've created dynamic textfields where visitors can enter their data, like name, address, comment and so on. My website appears on fullscreen when the web address' typed in. When it's in this fullscreenmode, I'm not able to type in any data in this textfield. When I leave the fullscreenmode I am able to type in my data. Also I've created a dynamic textfield, which loads this sent data from an external database. Now I want to add a scrollbar to this textfield, so all the messages that doesn't fit in the field will be visible. I've tried to create my own, without success, even the simple one in the componentspanel doesn't work.
View 2 RepliesActionScript 3.0 :: Swf Automatically Loading Up In Full Screen Mode?
Jul 30, 2009Is there a way in AS3 to load the .swf to full screen mode straight away?The only way I can find to do it is by adding an event listener for the mouse or keyboardSurely this can be done automatically at the start when the .swf is loaded?
View 3 RepliesActionScript 2.0 :: Blend Mode Overlay Not Applied After Loading A Swf?
Dec 27, 2010I have a swf that is loaded with moviecliploader class onto a container empty mc.
The problem is, some stuff on the loaded swf contains a blend mode overlay + alpha animation. When it's loaded .... the overlay mode is just aparently ignored! >_<
I guessed it's maybe because the overlay thing is in one swf and the background is on the other, so i tried setting the overlay with with onLoadInit ... :
Code:
content.menu.background.blendMode = 'overlay';
this had no good result, my alpha animation on the mc would just not happen and i got no overlay blend at all =
