I have this script to load external swfs to the stage. But I want to load them into a empty clip called "emptymc".I know I need this: MovieClip.addChild(Loader);But not sure where to place it.
Code:
package
{
[code]....
how to load an swf into an empty clip labeled 'holder' on my main timeline on mouseclick of a button?so far im trying
Code:
button1.addEventListener( MouseEvent.CLICK, onClicked );
function onClicked( e : MouseEvent ):void {
MovieClip(parent.parent.parent).holder.loadMovie("thing.swf");
}
but loadMovie isn't supported..
I want to load an instance on my stage into an empty movie clip on my stage when it gets to a certain frame. The instance is called jpeg_2 and the movie clip is called empty_mc.
View 7 RepliesI have an object (with it's own timeline) and on the last frame of that timeline I have the following code:
Code:
stop();
_root.createEmptyMovieClip("mainLoop_mc", 2000);
with (_root.mainLoop_mc){
[code]....
The problem is, when the "mainLoop.swf" file loads it obliterates my main UI SWF instead of attaching itself to a particular spot on the UI. So one SWF is replacing the other.
It is on tracing variables. I have a attached main.fla, movieclip.fla, and movieclip.swf.
If you run main.fla from within flash you'll notice the actionscript on the first frame of main.fla is loading movieclip.swf into an empty movie clip called container on the first frame of main.fla. No problem.
In movieclip.swf I assigned three values to three different variables, a, b and c, on the first frame of moviclip.swf(See movieclip.fla) like this:
a = 1;
b="string";
c 1.234556;
Also, in the first frame of main.fla, there was actionscript as follows:
container.loadMovie("movieclip.swf");
trace (_root.container.a);
trace (_root.container.b);
trace (_root.container.c);
Now each of the above traces produced undefined results when I ran main.fla from within flash. And yes I had complied moviclip.swf. Why did I get undefined results? What concept am I not grasping?
I've got a flash site where most of the content is loaded with external swf's. Instead of creating a holder, I create a "container" and load the movie onto it. Here's the code for that:
Code: Select all_root.createEmptyMovieClip("container", 1);
loadMovie("swf/print_pfsads.swf", "container");
container._x = 200;
container._y = 150 ;
How do I make a preloader for this? Every tut I see you have to have a physical empty movie clip called "holder_mc" in order to preload. Is there a way, or should I just physically make a "holder"? It'll be a giant pain for me to redo all of this so I'd prefer to know if there's a way of preloading...
I'm trying to load a flash game (hosted remotely) into an empty movie clip, and when I do the game appears but the buttons are disabled.Is there any way around this? I need to code it in as2 but the game was coded in as3, maybe that's causing issues? I've tried 2 slightly different ways so far but with the same affect:URL...(BTW, the game I'm using is just an example because the real one isn't finished yet)
View 1 RepliesI've loaded an external .swf into a movieclip in my parent .swf using the loadMovie(); function. The file loads perfectly and in the right position, however I can no longer access the functions of the external .swf. When I load the file into a level rather than a movieclip, the functions (buttons and timeline) of the external .swf work properly. Is there any way to use the functions of the external .swf when I load it into an empty movie clip?
View 7 RepliesI am doing a simple loadmovie, bringing an external swf into a holder clip that is empty.
here is my code. I have it placed on frame one INSIDE the holder clip:
PHP Code:
_root.pages.weddingholder.loadMovie("wedding_section.swf",this);
The external movie loads, but the issue is HOW it loads. The swf is 643x394 and looks fantastic by itself. When it is loaded into the holder clip though, it scales it and makes it much taller and wider than the actual external SWf is, and is messing the way it looks up.
I'm trying to load an existing webpage using the loadMovie command into an empty movieclip.
I thought this would be easy, but I can't seem to get the code to work and have tried several variations of the code below....
//catrun_mc=the empty movieclip//
catrun_mc.loadMovie.getURL("http://www.website.html");
how to load external SWFs into an empty movieclip, and then having them unload when another is selected. At the moment, all I can do is load the swf onto the stage with no positioning, and clicking the other button just loads the next swf on top.
Actionscript Code:
stop();standard_btn.addEventListener(MouseEvent.CLICK, onLoadClick);function onLoadClick(evt:MouseEvent):void{ var loader:Loader = new Loader();
[code].....
I would like to automatically load an external swf inside an existing empty mc (or a new one) and load/unload different external swf on several button click functions. I've been trying so many different methods until its probably loaded with irrelevant functions!
var myLoader:Loader = new Loader(); addChild(myLoader); var url:URLRequest = new URLRequest("homepage.swf"); myLoader.load(url);
myLoader.x=477;
myLoader.y=0;
/* Click to Load/Unload SWF or Image from a URL.
Clicking on the symbol instance loads and displays the specified SWF or image URL. Clicking on the symbol instance a second time unloads the SWF or image.
Instructions:
1. Replace "[URL]" below with the desired URL address of the SWF or image. Keep the quotation marks ("").
2. Files from internet domains separate from the domain where the calling SWF resides cannot be loaded without special configuration.
*/
button_1.addEventListener(MouseEvent.CLICK, fl_ClickToLoadUnloadSWF);
var fl_Loader:Loader;
//This variable keeps track of whether you want to load or unload the SWF
var fl_ToLoad:Boolean = true;
function fl_ClickToLoadUnloadSWF(event:MouseEvent):void
[Code] .....
I'm loading an external swf into an empty mc called "emptyMC" on my main timeline. That loaded swf loads another swf into an empty mc called "view2" when a button is pressed. Code:
on (release) {
loadMovie("tabletennis.swf", "_root.emptyMC.view2");
}
The above code isn't working right. I'm not sure how to target each empty MC in sequence in order for this to work.
I'm creating an image gallery and looking for a simple way to preload external jpegs (with % loaded) into an empty movie clip.I'm using thumbnails- there are no "next" or previous "buttons".[code]I've been googling/ searching all day.
View 1 RepliesI have a problem with buttons and transitions.I have two buttons onstage (they're inside a movie clip) inside the movie, on the button one I have the following code:
on (release) {
if (_root.externaltwo._currentframe == 7) {
_root.externaltwo.gotoAndPlay(8);[code]....
I have similar code on button two and this does indeed make the buttons move into place as required. My problem is this, I need to load in external swf files into an empty movie clip on the main stage called container. These External SWF files have transitions and this is where my problem is. If I place a normal button on the stage it works but not if the button is inside a movie clip and has actions applied as above. The code next is what I have believe should also be placed on the button to make swf transition one load in.
on (release) {
if (_root.currMovie == undefined) {
_root.currMovie = "externalone";[code].....
Obviously a similar code would be placed on button two so the transitions could take place.I am uploading my file so you can see exactly what I am talking about. Also in this file will be a folder containg a version that works but without the buttons moving up and down which is the effect I wish to have
I have a button when I click on it it is suppose to load an external swf into a empty movie clip. But everytime I clicked it, it juz loops the whole flash animation of this very whole flash the button is currently in which it should actually load the external swf to the empty MC. I can't attack my file here since it is too big.
View 1 RepliesThe problem is this: I am loading 4 external SWFs into an empty MC on the main stage for each of the 4 projects.So you press a button on the main stage for a project, and it loads that specific SWF.These SWFs contain an opening text for each project, a button to "continue" to the gallery, then the text fades out and the gallery loads.That's all within the SWF itself.The SWFs work fine on their own, but the problem is that when I load the SWFs into the empty MC on the main stage, the "continue" button doesn't work correctly The SWFs load fine, it's just the button At first when I pressed the button it would send my main stage back to the first frame, so I thought it was because the AS for the button in the SWF was probably conflicting with the main stage and confusing it. I went back into the SWFs and tagged part of the SWF timeline with the name "togallery" so that when you click the "continue" button, in theory, Flash knows specifically where to go within the timeline of the SWF and not the timeline of the main stage.
That hasn't worked either. The button just doesn't work at all now, at least not when the SWF has been loaded onto the main stage. Again, it works fine on its own. So what can I do? How can I get a button within an external SWF to reference only it's own timeline and not that of the main stage?
I have 20 external .swfs im trying to load into 20 blank movieclips . i am trying to load them randomly into each blanck movieclip without the external .swf's duplicating.
so far I have this code
[Code].....
Im trying to load all the movieclips with all the external .swfs without any
of the .swf's repeating.
I have a problem with buttons and transitions and it is similar to a problem I had a couple of days ago that I posted and that was sorted out. I have two buttons onstage (they're inside a movie clip) inside the movie, on the button one I have the following
[Code]....
I have similar code on button two and this does indeed make the buttons move into place as required. My problem is this, I need to load in external swf files into an empty movie clip on the main stage called container. These External SWF files have transitions and this is where my problem is. If I place a normal button on the stage it works but not if the button is inside a movie clip and has actions applied as above. The code next is what I have believe should also be placed on the button to make swf transition one load in.
[Code]....
I went through Claudio's preloader transition tutorial on kirupa ([URL]). I have tried to apply it to my own fla and everything seems to work fine EXCEPT I can't get any of the external swfs to load into the empty movie clip called "content". And yes, I have checked and rechecked to make sure that all MCs have instance names!
View 7 RepliesI want to load a random movie clip from the library to an empty clip on the stage called (bg_graphics). the clips in the library are called (green, blue, yellow).
View 5 Repliesload external .swf movie and I need it to be duplicated as many times as it is pointed in a variable.i have been try some scripts that not work
View 1 RepliesThis used to be so easy in AS1 and AS2, but since I haven't been using Flash in 2 years now. looks like time ran over me - and it looks like it'd take me a while before I figure this out in AS3. So, what I want to do is to call external swf into another movie clip and my stage is set like this.
In main timeline I have two layers:first is (center_mc) and contains movie clip "center_mc" which is positioned in the middle of stage and in the second layer (mbottom_mc) is movie clip "mbottom_mc" that will contain buttons as "menubtn01". So what I Want to do is when I click on this "menubtn01" to call external swf into THAT movie "center_mc". So to clear the external swf that "center_mc" is showing with the new.
Last time I wanted to load an external clip I could do it like this on (release) {
[Code]..
So now I want to achieve exactly the same thing in AS3, I have been looking at examples on the web but am getting all sorts of errors and basically don't know what I am doing. I also want to know how to navigate to .swf files in a file structure, as I have to build an old school fscommand file structure for a cd-rom.
I am going to have a single page, with a 6 minute sound clip looping (don't ask - sort of a for-fun site I am doing at work). I have broken the clip down into 12 smaller clips to reduce file size, and I want to have a random clip play each time a user refreshes, but then have the clips play sequentially from wherever they start (e.g. randomly start with clip 10, then play 11, 12, 1, 2, etc.). I have created 12 different flash files, each with one of the sound clips.n the last frame of each of the 12 files, I am loading the next movie. For example, clip 1 has:Code:loadMovieNum("clip2.swf", 0);Everything is working, except I want to have the next sequential sound clip loaded while the current clip is playing, so that the sound plays smoothly with no interruptions. Right now there is a slight pause between each clip.
I have looked through a lot of the pre-loader scripts and posts, but I don't want to have any sort of obvious pre-loader if I can avoid it (no "loading" bar, etc.). I also was not sure whether I should be putting the code on the main file, or on each of the 12 files (which seems more likely).Also, if there is an easier way you can think of to do this, that would be great as well (the main reason I separated them into separate .swfs is because I thought it would load quicker when the user first gets to the page).
I'm trying to make a Flash website that contains a Flash Store (loaded as an external SWF.)
I have set my pages up in a movie clip file called pages_mc. Each desired page is has its frames labeled (ie: "HOME," "PRODUCTS," ect�)
I need to know how to load the SWF titled, flashshop_plugin.swf onto the "PRODUCTS" page of pages_mc.
What is the best way to do this? I've tried a number of things, which have resulted in the external SWF not loading or having it load, but not go away when another page is selected. I'm assuming I would use add/remove child for this? Just not sure how and accompanied by what other code.
PS: The Flash Shop template I am using suggested using the following code to import it:
[Code]....
I am trying to loadmovie a external swf within a movieclip in the main flash document but nothing shows up, why is that?
View 12 Repliesi don`t know how i got back to the basics but i am having a problem with a preloader. What i do... I have an empty movie clip that loads an swf after a user make a button choise. So after the user choise i make the preloader._visible = true; and in the preloaders movie clip i have this code
onClipEvent (enterFrame) {
_root.externals.stop();
mctotal = _root.externals.getBytesTotal();
mcloaded = _root.externals.getBytesLoaded();
[Code]....
The "_root.externals" is the empty movie clip that loads the external swf.
The problem is that when the preloader goes to 100% the external swf plays but plays in loop all the time. In the external swf i have the action stop(); in a frame but it doesn`t stop insted of stoping it replays all the time....
if i just tested loading an external swf into a movie clip, and it loaded fine... but it doesnt let me click any of the buttons or anything in it ( i imported a game i made into a different swf and i cant click the start button)... is that just how loadMovie works? or is there something i did wrong?
View 10 RepliesI am going to have a single page, with a 6 minute sound clip looping (don't ask - sort of a for-fun site I am doing at work). I have broken the clip down into 12 smaller clips to reduce file size, and I want to have a random clip play each time a user refreshes, but then have the clips play sequentially from wherever they start (e.g. randomly start with clip 10, then play 11, 12, 1, 2, etc.). I have created 12 different flash files, each with one of the sound clips.
I am using the randomize script found here, which is working fine:
[URL]
On the last frame of each of the 12 files, I am loading the next movie. For example, clip 1 has:
Code:
loadMovieNum("clip2.swf", 0);
Everything is working, except I want to have the next sequential sound clip loaded while the current clip is playing, so that the sound plays smoothly with no interruptions. Right now there is a slight pause between each clip.
I have looked through a lot of the pre-loader scripts and posts, but I don't want to have any sort of obvious pre-loader if I can avoid it (no "loading" bar, etc.). I also was not sure whether I should be putting the code on the main file, or on each of the 12 files (which seems more likely).
Also, if there is an easier way you can think of to do this, that would be great as well (the main reason I separated them into separate .swfs is because I thought it would load quicker when the user first gets to the page).