I have function to zoom in and out a movieclip in one frame. Problem is that when i click on a button for another frame, where i have another picture, this from frame one, overlap.
Code:
koszula0.addEventListener(MouseEvent.ROLL_OVER, zoomIn_0);
koszula0.addEventListener(MouseEvent.ROLL_OUT, zoomOut_0);
function zoomIn_0(ev:MouseEvent):void{
[Code]....
I'm doing simple program to design kitchen. I'd like to avoid overlapping my movieclips but i dont know how. It means that when you drag movieclip - it would stop when it meets another movieclip. In others words, movie clip can be anywhere but not on the other movieclip.
View 1 RepliesThe issue I am having is that the animation will play fine on my mac but when opened on a Windows OS it just loops and all the movieclips overlapp.I am looking for a quick clean code solutiion I used code snippets to control the movie and do not have a knowledge of hand-coding AS.Note:It is all set in one scene and one frame all of the movies are nested.What I want the animation to do:Button 1 activates a series of movieclips, stops when another button is selected and resumes at the begining again when clicked.Button 2 Same action ability as button 1Button 3 Same action ability as button 1This is the snippet based code I am using now:
step1.arrows1b.stop();
step1.arrows1a.stop();
step1.arrows1c.stop();
[code]....
I need a way to blend two movieclips each with an alpha between 0% and 100%, and instead of adding the two overlapped parts together, i need the colour to be an average of the two overlapped parts.
Ive been looking for a few different ways to manage this. The reason I need this effect is to do a realistic motion blur for a moving ball (which can be in any direction).
Is it possible to detect multiple overlapping movie clips and subsequently telling the user which clips s/he has moused over? Basically, I'd like to have a set of movie clips that are in different shapes overlapping each other (ie, a set of letters...A, B, C), and when the user mouses over a certain area, only A & C would be revealed (if they are being moused-over) but not B. Basic Listener/MouseOver tests seem to only show the top most clip, rather than others below it.
View 7 RepliesThe issue I am having is that the animation will play fine on my mac but when opened on a Windows OS it just loops and all the movieclips overlapp.I am looking for a quick clean code solutiion I used code snippets to control the movie and do not have a knowledge of hand-coding AS.
Note:It is all set in one scene and one frame all of the movies are nested.
What I want the animation to do:Button 1 activates a series of movieclips, stops when another button is selected and resumes at the begining again when clicked.
Button 2 Same action ability as button 1
Button 3 Same action ability as button 1
This is the snippet based code I am using now:
step1.arrows1b.stop();
step1.arrows1a.stop();
step1.arrows1c.stop();
step2.arrows1a2.stop();
[code]...
Basically what I'm trying to do is build an interface out of a fan of cards. I've got the the whole fan as a movieclip and then individual movieclips of the cards inside that have rollover animations.My issue is the rollover works on the cards arranged behind the cards that have the cursor over, which I don't want to happen.e.g see attachment.here's the rollover actionscript i've got on each card:
onClipEvent (enterFrame) {
if (this.hitTest(_root._xmouse, _root._ymouse, true)) {
this.nextFrame();
[code].....
I am creating a memory sequence game and I was wondering:
1. Is there a way to random position movieclips on the stage without having them overlap each other?
2. Is there a way to have flash draw a vector line from one clip to another in sequence and then have the user retrace what flash did? I have 6 movieclips on the stage, each with their own instance (ex. obj1_mc, obj2_mc, etc.). Is there a way to tell flash to always draw a line between movieclips in sequence even though the movieclips are randomly placed on the stage?
I have two movie clips physically overlapping, one nested inside the other:
green
green.blue
An onRollOver function is included in each movie clip. I can get the onRollOver function to execute for the parent clip (green), but cannot get the function within the nested clip (blue) to work. Attached is an .fla document with an example of my problem.
Is it possible to attach mcs at random locations without the possiblility of them overlapping?
View 1 RepliesBasically I want to know if there is a way to go from a zoomed in version of something, and then seeing the whole image in another frame. (By pressing a button)
Let's say there's a tree, I would bascially like (upon pressing a button which I can do) to zoom out and see the whole scenery. Is there a way I can do this without actually changing the size of the image?
I look at professional animations and notice the camera-like effects they manage to put into these animations. I'm wondering how I can do the same without having to just enlarge or reduce a movieclip across the stage. Is there any way to add a camera view on your animations or do you just have to bear with Flash's basic necessities?
View 1 Replieshow to zoom into(hence zooming the map outward) set locations on a map, yet only those locations. I have a script which will zoom to your mouse location and also if I set the specific x and y, but still zooms when clicking on any other spot.
how do I zoom to only a set location and nothing else within a map/image.
I'd like to have my viewers mouse over any of the MovieClips on the scene and using the keyup / keydown have only that MC scale up or down. The scaling should only effect the moused over MC.Here is what I'm using for the scaling on one MC now...
var Listener:Object;Listener = new Object();Listener.onKeyDown = function(){ if (Key.isDown(Key.UP)) { container._xscale = container._xscale + 10; container._yscale = container._yscale + 10; } if (Key.isDown(Key.DOWN)) { container._xscale = container._xscale - 10; container._yscale = container._yscale - 10; } };Key.addListener(Listener);
I was just working on trying to zoom a flash movie using JS but cant seem to get it and it is driving me nuts any of you guys know how I can zoom in and out on a movie using action script.
View 2 RepliesI need some help with creating two buttons that zoom in and out of a movieclip.I have seen some tutorials and tried them, but got really confused.My problem is that the movieclip i want zoomed (in & out) is embedded inside another movieclip, so don't know how to refer to it.
also where should i declare the zoom function?? on the movieclip or on the main timeline?? the buttons that control the zoom in and zoom out are on the main timeline.
I am a really new flash beginner, and I am trying to write a site that can do this scaling in/out effect (Not an image) after when a new file is loaded into the page. I've googled and searched everywhere and couldn't find a possible solution to this.You can see the site, there is a zoom in and moving effect after a button/new page is loaded.
Here are the scaling, I am talking about:http:[url]....
I had found a script which zooms to your mouse position, but is there a way to adapt this so it only zooms in on the particular mc and not the mouse position?
[Code]....
I've been racking my brain for the last week, and Im trying to use a map to zoom into certain city locations on the map. I believe each city locatio needs to be its own mc on the map, but don't know if I need to zoom into the coordinates of that mc? Here's what I have so far which zooms in on the appropritea x/y coordinates. Does anyone have any advice as how to change this or some other way to zoom into certain locations on a a map?
[Code]....
I am a really new flash beginner, and I am trying to write a site that can do this scaling in/out effect (not on image) after when a new page is loaded into the page.You can see the site, there is a zoom in and moving effect after a button/new page is loaded.
View 2 RepliesI am attempting to create a map that has the ability to zoom in and out as well as a click and drag feature.What I need help on is setting boundaries for the map. I can set them for the map when it is zoomed out, but they need to change as the map zooms in. I've been searching lots of forums lately to see if anyone can help, but no luck yet...
View 1 RepliesIs there a way to that users can zoom in and out of an image and even drag/scroll around if the image is larger than the viewing window.I looking for a way to creativly display my portfolio in a limited area.
View 2 RepliesI am working with some images in my flash file which I would like to have at a high resolution (approx 1280X1024 px or even higher) so that they look good when they take up a full screen, and also when I zoom IN on them.
However, when I import them into flash at this size, they look TERRIBLE when zoomed OUT (eg. to 15%). They look fine in photoshop at this size.
I have an image that is loaded into a scrollpane, which works fine. I have two buttons on the stage that I want the user to be able to click on in order to zoom in or out of the image that is loaded into the scrollpane. I can't seem to get these zoom buttons to work on the movieClip with the image that is loaded into the scrollpane.
Lastly, I don't know if this makes a difference, but this swf file is loaded upon release of another button on the root timeline of another swf.
I tried attaching a simplified version of this file to this message but even zipped I cant get it lower than 380kb. I can email it to anyone if they are interested.
Being adventurous I've got (all built in AS1) a masked area that you can view an image in. I'm trying to make it so you can zoom it in and drag it around, within the masked area, but the dragging locks it so that you can't drag it to the point where it leaves the edge of the masked area - if you follow. So when you're zoomed in, the iamge is never allowed to be dragged off so far that it's not filling the masked area. I've tried all sorts of code and the following code seemed to work well
Code:
// imageMC = the clip being scaled/repositioned/dragged
limitLeft = 0-Math.round(imageMC._width-maskWidth);
limitUp = 0-Math.round(imageMC._height-maskHeight);
limitRight = 0;
limitDown = 0;
imageMC.startDrag(false,limitLeft,limitUp,limitRight,limitDown);
But since the border size around the image is adjustable (it could be 2, it could be 20) and that eats into the area used to show the image (eg image is offset by imgBorderSize and shrunk by imgBorderSize*2) I tried to factor that into the formulas because once I turned the borders up the above formulas wasn't working right anymore
Code:
// imageMC = the clip being scaled/repositioned/dragged
limitLeft = 0-Math.round(imageMC._width-maskWidth)-(imgBorderSize*2);
limitUp = 0-Math.round(imageMC._height-maskHeight)-(imgBorderSize*2);
[code]....
I also tried to make it so when you zoom in, it zoomed in on the center of the area you can see through the mask, not on the top left - so repositioning is occuring alongside the scaling for the zoom to try and acheive that. Nothing clever, just :
Code:
// ZoomCalc range = 0-100;
// imageMC = the clip being scaled/repositioned/dragged
imageMC._xscale = 100+(2*ZoomCalc); // 100% - 300%
[code]....
When it zooms out however it'd be nice if it didn't snap back to center via the above code, eg if yu're zoomed into bottom left it would stay viewing bottom left as it zoomed out - yeah?If anyone has ANY input to this I'd greatfuly welcome it :/ If I manage to get it working then I have to figure out what my layer above all these layers with clickable buttons don't work as soon as I implemented the dragging of the image layer Is there no way to have buttons on something that is being dragged? ((
I'm panning on an image 2kx2k pixels. Panning is working wonderfully. I added a scrollRect to the image container and test the mouse position. I'm trying to add zoom:
Main Movie -> PanClass Object -> Image
Container -> External Swf.
I have a couple test buttons that simply allow a user to zoom in or out on that image. I figured that by zooming in (adjusting x and y scale) of the external swf that my movie would scale and continue to pan which it does, but it is still panning at the original size of the image. I need it to pan in the same size window as before but with the new scaled dimensions. I've included the panImage function.
I have 23 keywords in an XML file. In an area of 1600px by 500px there should be zooming in and out (for about 5,6,7 sec which depends on the number of letters) 10 keywords, randomly chosen from the XML file. Each keyword may appear in different spots in the area, it doesn't matter.
how to fix this zooming in and out keywords?
I have loaded an image from a particular site using loader..and added this loader in a Movieclip.. I want to zoom and pan theimage.. How to zoom particular area of a movieclip?
View 6 RepliesI am quite new to Flash and I want to make the following. I want to have a video (avi, mpg or something else) playing. But you should see only a part of the movie (a smaller rectangular "window"). Through this window I want to be able to zoom in on the movie, and move it, so you can see different parts of the movie.
Is such a thing possible in flash? If so, can you give me some tips on how to start?
Since at least cs3, Illustrator, InDesign & Photoshop has all had the Alt + mouse wheel zoom function. I have wondered when this would become available in flash. I just installed my cs5 design premium and immediately noticed that the zooming function has been further improved in the other programs but still nothing has happened in flash.
Am I missing some way to enable this zoom function or is there some third party plugin that can help me? It is annoying and time consuming to have to press z then click around to get the right zoom level and then click whatever tool I was using before instead of just pressing alt and scrolling a bit.