ActionScript 3.0 :: Webcam Non-functional On Some Servers?
Feb 13, 2010
We used the FLARmanager, developed a nice little app, runs find locally, runs fine on our dev Linux server.Put it on an IIS server. When we click on the 'allow webcam' prompt, the webcam control panel pops up (as usual), butthere is no camera image displayed. The camera light does not come on. The camera control panel goes awayCould it be server configuration? Settings? Security? Why would it be different on different servers, all things being equal?
View 0 Replies
Similar Posts:
Feb 9, 2012
I am having really trouble with fullscreentakeover... I have a VideoPlayBack Component and a menu with 8 videos that sets the source of that component, when i test it windowed, or when i start the published .exe and change to windowed mode at start, the videos works perfectly, even if i change to full screen after load the first movie... If i start it full screen, i get a beautiful black screen.... This is my code:
ActionScript Code:
function clic(event:MouseEvent):void
{
[code]......
View 0 Replies
Sep 4, 2009
The playhead in Motion Editor doesn't work and I'm seeing in tutorials.I can't scrub it along the timeline.When I pick a keyframe point it doesn't appear there unless I change the value of that point. If I then click on the playhead rectangle, the playhead disappears (actually it appears to jump to the first frame where it's half visible and can't be moved).I was playing with the motion editor interface trying to better define the problem and I figured out what's wrong.
The Motion Editor values for graph size, expanded graph size, and viewable frames were unusable in their default settings. In particular, viewable frames were set to 1 by default. As I increased the value the playhead started to function. I can't set a value higher than 117. I've maxed-out the graph size setting at 180 (300" wide format display) and the expanded graph size at 200.
View 3 Replies
Nov 6, 2009
i want to make a sliding panel with 2 buttons on it. The panel pops up from the bottom of the screen when the mouse is hovering over the the bottom 25 pixels of the screen. The panel is set to disappear when the user hovers the mouse off of the panel. At first i just tried to put buttons on the panel and covert the whole thing to a symbol, but then i could not access the individual properties of the buttons. What i tried instead is to make invisible buttons over the area where the image of the buttons were on the panel. The problem is that when now when the user hovers over the button, flash reads it as the mouse leaving the panel and the panel disappears.
View 3 Replies
Apr 23, 2010
I'm setting up a functional test suite for an application that loads an external configuration file. Right now, I'm using flexunit's addAsync function to load it and then again to test if the contents point to services that exist and can be accessed.
The trouble with this is that having this kind of two (or more) stage method means that I'm running all of my tests in the context of one test with dozens of asserts, which seems like a kind of degenerate way to use the framework, and makes bugs harder to find. Is there a way to have something like an asynchronous setup? Is there another testing framework that handles this better?
View 3 Replies
May 6, 2010
I have a button on a swf that works fine (click it and it launches a html page) on its own when rendered as a swf - the code forwards to a new page on a html site.[code]but I have used a separate preloader to help load in the graphic, the trouble is this does not seem to pass on the above code, yet the rollover code (that makes the mc resize a little) that is a layer or 2 into the bttn works fine in the original swf and the preloader.[code]
I wonder if anyone could advise me as to how, in as3, I can regain the click functionality back so the swf works after being preloaded.Also, is there a quick way to get the 'finger' pointer instead of the 'arrow' one if I so wished?.
View 5 Replies
Dec 26, 2006
I have a series of nested movieclips that on rollOver they come to full alpha value and on rollout they go to like 20 alpha. In one of the clips it has a scroller but when I apply the alpha effect it makes the scrollbar not functional.How can I make an alpha effect like this with making everything inside the MC functional?I was using this type of code by the way: my_mc.alphaTo(20,1);
View 7 Replies
May 26, 2007
I've been solving the problem with a mail form already for hours. I've tried many of them, but none of them works. The mail can't be sent. For example this one:send me some functional form so I could try it?I don't have any clue where the problem is. I have been trying it from two servers and on two different e-mail addresses. Nothing works.
View 1 Replies
Apr 29, 2010
I have created a drop down menu all as one movieclip. I have placed for the variable, event listener within my scripts layer in this movieclip as it should be, no errors. It works fine if I attempt to navigate from my main navigation buttons (ones that can be rolled over and clicked on (when rolling over them, it also unmasks a menu of submenu buttons. However, my issue is that if i attempt to change this navigation code to the submenu button, it no longer performs as it should (again, no errors). The only difference is that my submenu buttons are on a layer underneath the main buttons within this same movieclip, and they are masked by a shape for the rollover event.
[Code]....
if i change the home_btn back to site_btn (a submenu button), it no longer functions, but works properly when assigned to home_btn.
View 3 Replies
Jan 13, 2008
I found a cool menu that I'd like to be able to use but right now I don't know how to make the buttons become functional links. If its just a matter of editing the XML only? Or...does something need to be added to the actionscipt as well. I have a hunch both need to be edited and I have already tried various revisions. Below is the link where the example and files can be found. Be aware that if you try to use the actual files you will need an mc tween extension found at [URL].
Here is the XML code
<?xml version="1.0" encoding="iso-8859-1"?>
<item nazov="button num 1 "load="" image=""/>
<item nazov="button num 2" load="" image=""/>
<item nazov="button num 3" load="" image=""/>
<item nazov="button num 4" load="" image=""/>
[Code] ....
View 2 Replies
Jan 17, 2011
Here is piece of code:
protected function handleTriggers(raw:Object) : void {
var name:String, value:String, map:Object;
map = {
'onclick': MouseEvent.CLICK,
'ondblclick': MouseEvent.DOUBLE_CLICK,
[Code] .....
Object is generic DisplayObject and raw object contains series of onclick, onmouseover, etc event triggers. It was meant that I could attach event listeners automatically following the properties of that raw object. And it seems like it works, as I indeed can see some listener Functions in listeners property of the DisplayObject and their number corresponds to the number of triggers. But later when everything is put on stage, only the last event handler gets triggered.
View 1 Replies
Sep 29, 2005
how to have a button work when it is inside a movie clip that has actions on it. for example ..i have a movie symbol that has a 'on rolloever..x-scale up to 150%..and then back down to 100 on rolloff.' when i put a button inside this, that button loses its functionality.
View 3 Replies
May 2, 2005
I was wondering how to code the AS to make the back button functional in a Flash web site?rhamej uses this function in his web site
View 3 Replies
Aug 17, 2011
where can find a tutorial or Tree Menu like the astra Tree Menu with a functional horizontal slider? I am dont know how to make the changes. All I need is the simple astra tree menu but I NEED that horizontal slider.
View 0 Replies
Mar 5, 2006
Can someone point me in the right direction to making a functional Smooth Dynamic Scroller just like [URL] (Under Portfolio). I'm not saying "The Same" - I mean like, be able to have two icons that I create (One Up and One Down) then have them function the same as the 2Advanced website. Click and hold, it smoothly rolls down/up, release it stops. Also for it to only scroll as far as the content does.
View 5 Replies
Jan 16, 2008
In one situation we have one movie that chooses randomly to load one of two other movies. On one server it works fine. On another server, flash says there are no errors and that it loads correctly (i tested this using onLoadError and onLoadInit). There are no errors and the onLoadInit is called correctly, but what is in the movie wont display after being loaded.In another situation, the user can upload a photo to the server and then that photo is used in the game. The photo upload works properly, the photo gets put on the server and all that jazz. Now on the one server, the loading of the image works fine, it shows up and everything. But then on this other server, yet again the photo says it loads properly with no errors, but it doesnt dipslay it. But I can go on wiht the rest of the game working fine... just no photo... has anyone run into this before?
Oh yes, and it also works on my home server, so it works on two servers and not this other one. So that makes me think it's a server issue, but if that was the case wouldnt flash throw errors if it couldnt work? And like i said, flash at least says it's loading the photo correctly!
View 4 Replies
Jul 6, 2010
I've created a highscore board which uses Flash (AS3), PHP and MySQL. Works fine when all the files are on the same server.However if the swf is on a differnt server (let's say serverA) and the PHP and MySQL are on serverB then it doesn't work.By the way this was the error message...Error #2044: Unhandled securityError:. text=Error #2048: Security sandbox violation: http://...etc.
View 11 Replies
Sep 9, 2010
I've created a highscore board which uses Flash (AS3), PHP and MySQL. Works fine when all the files are on the same server. However if the swf is on a differnt server (let's say serverA) and the PHP and MySQL are on serverB then it doesn't work. I'm assuming there could be some security issues which is preventing this from happening. Does anyone know if there is a way around this? Or if it's even possible?
By the way this was the error message...
Error #2044: Unhandled securityError:. text=Error #2048: Security sandbox violation: http://...etc.
View 4 Replies
Feb 29, 2012
I don't think this is possible, but is there a way to validate the arguments a callback accepts. For example someone passes me callback "mycallback", I want to assert it accepts an argument String.
public function addHandler(handler : Function) : void{
//pseudo code
Assert.functionAcceptsArguments(handler, String);
}
View 1 Replies
Nov 6, 2008
this might sound a little complicated but this is what i'm trying to do..when you click on the movie clip (news on the site below), you can drag and drop as you want. also, when you click on the news, i want the slide down movie clip to play with a functional custom scrollbar. the problem is that i only want the top part of the news to be dragable, and the rest to be by itself, with the scrollbar. is this possible?
[Code]...
View 3 Replies
May 30, 2010
i'm a flash newb, wrestling with actionscript 3 and ran into a problem with a drop down menu.the menu is composed of nested movie clips that open and close, and contain buttons that control a ui loader in scene 1. it seemed to be working all right until i realized that after opening and closing and reopening a submenu, the buttons that worked the first time stopped controlling the ui loader. since there aren't any error messages i'm kind of at a loss as to what needs fixing.
View 7 Replies
Jun 10, 2010
I know that you can grab your web server's current time with php, .net, or whatever server side scripting language you have available, and create a variable to feed into your flash movie at the embed time.What I am wondering is if there is a time server out there with an XML feed that you could connect to with flash to grab the current time based on whatever parameters you feed into the query string.I would doubt such a thing exists (at least for free) since so many people would probably tap into it and overload the server with requests, but it would be an easy way to set up someone's flash movie to grab a somewhat accurate current time stamp at load time (or any other time you'd want to call on it) without the need for server side scripting.
View 1 Replies
Jan 12, 2010
Which CI server do you use for Flex? My main contenders are currently
Hudson
TeamCity
Both seem to be popular on the general level but have you got some direct experience with using one or both with Flex development? Or would you recommend some other tool?
View 2 Replies
May 23, 2011
how can i make a store for a game where poeple can buy coins?can you guys give a step by step tutorial becouse i dont know nothing aBout MySQL servers.If you have a good book i could read to learn servers please give me the name.
View 2 Replies
May 27, 2005
I basically have a movie clip on one server and swf clips on a different server, and I am loading them using the loadMovie command.my problem is: on those movie clips I am loading, I have a stop(); action on the first frame, and I am triggering them to play when loaded by the containerMovie.play(); commandmy problem is: if both parent movies and loaded movie are on the same server, the action works fine and the movie is played on when the frame with the play action is reached.if they are on different servers, the movie is loaded alright (you can saee the first frame) but the action does not get executed and the loaded movie does not playexamples:[URL]
View 2 Replies
Oct 26, 2009
I'm working on a multiplayer game. basically need chat, rooms, login (user management).where i confused myself is with some different (or maybe the same) remoting technologies.I can do what i need with Flash Media Server, and have already purchased an influxis account. It uses FMS and SharedObjects.
Latency is a big issue for me, is there a difference between Socket Servers, AMF, and FMS ?can FMS be a SocketServer serving bytearrays ?is AMF a wrapper for data being sent to socket servers? if FMS is a socket server, can i use AMF for FMS?and which is the fastest? is SharedObjects on FMS fast enough (instant update) ?
View 4 Replies
Jan 6, 2012
Weeks back I faced a wierd issue in the behaviour of flashplayer running on IE7 which is invoking parallel https calls. I have two SSL enabled servers one is listening on port 443 and the other is listening on port 8443 but both running in the same domain. I developed a flex client (using httpservice class) which sends parallel https requests to these two servers. When the number of parallel requests increases say more than 5 requests to each server, the fault handler was encountered with the error message:[code]After breaking my head for a long days, I got one solution which would work. This issue is happening only if we are sending https requests to different ports in the same domain. So rather than moving one among the two servers to a new domain, I got a new DNS name for the same destination. So presently I got two DNS names pointing to the same machine in which both the servers are mounted.Now that I am using a separate DNS name for the server listening on port 8443 and the old DNS name is used to hit the server listening on 443.
View 1 Replies
Oct 3, 2010
in my flex application:[URL].. when i run my app, I catch this error:
SecurityError: Error #2123: Security sandbox violation: Loader.content: http://mySite.com/2/BusFlex/BusProducts.swf/[[DYNAMIC]]/2 cannot access http://cs9621.notMySite.com/u7397474/c_b51d9fe6.jpg. A policy file is required, but the checkPolicyFile flag was not set when this media was loaded.
[Code]...
View 3 Replies
Mar 15, 2012
is it possible to connect to two different BlazeDS servers from the same Flex app? I have already read this question: Can a Flex client app connect to BlazeDS running on a different server? However, it appears to be discussing the possibility of connecting a Flex client to a BlazeDS on a different server but not necessarily to another BlazeDS on a different server.
One Flex client connecting to two webapps using BlazeDS - Detected duplicate HTTP-based FlexSessions
In attempts I have tried, I get the error mentioned in the second question above: Detected duplicate HTTP-based FlexSessions, generally due to the remote host disabling session cookies. Session cookies must be enabled to manage the client connection correctly.
Is connecting one Flex application to two BlazeDS enabled servers completely impossible? We want to be able to have a "common functionality" BlazeDS server that is used by a number of Flex apps that each have their own local BlazeDS server for their own functionality.
The way I'm currently doing it:
In my mxml file, I'm defining a a channset like so:
<mx:ChannelSet id="dataService1Channel">
<mx:channels>
<mx:AMFChannel id="dataService1AmfChannel"
[Code].....
The calls work and I can get the data but I'm getting that warning I mentioned in the form of an alert in the Flex application.
View 1 Replies
Apr 12, 2010
i uploaded the same copy of a website to 2 different hosting for testing. the preloader that displays the percentage loaded when u click on a SECTION in the site (not the very first 1 tat appears before u enter) is done using the movieClip Loader Class, the preloader bar & percent text displays correctly on 1 server but doesn't on the other. My guess is the bytesLoaded n bytesTotal parameters are undefined in the "not working version".[URL]
Code:
var mcLoaderA:MovieClipLoader = new MovieClipLoader();
var listenerA:Object = new Object();
mcLoaderA.addListener(listenerA);
[code].....
View 3 Replies
