I have a entire XML and I've already loaded it. How do I get a specific node? For example:
<images>
<image url="" label="" etc=""/>
<image url=""/>
<image url=""/>
</image>
I need to pass the entire node through params
Like this:
var node:XML = xml.images[0];
trace(node); // <image url="" label="" etc=""/>
Is that possible?
I've got some xml:
var xmlData:XML =
<1stNode>
<buttonID>first child node value</buttonID>
[Code]....
Then I want to read specific node value based on a value passed to a function. .
var buttonID = new Button;
var imageID = new Image;
var labelID = new Label;
[Code]....
I'm don't know how to get the value when node name is dynamically changed.
I know I can use the XMLdocument class and go back tothe old way of doing thinsg. So I have an AS3 Air app which is successfully reading and writing to an XML file. Now I want to replace an attribute or an entire node if that's easier but I can't figure out how to target it. So the XML starts with an empty node:
[code]....
What I want to know is how to target the status node (or any other node for that matter) so that I can replace it or it's attribute. So, let's say I have a bunch of these guest nodes and I want to change the status for the first one, how do I do that using the new syntax.
I'm trying to figure out how to add an element node to my XML, but can't seem to figure out how to do it.
i.e.
var zoo:XML = <zoo>
<section>
<animals>
[Code]....
Say I start at a leaf node, and I traverse up the tree by using .parent(). I need an exit condition once it hits root. At the moment, I'm using parent.@name != "root", where name is just an attribute, but shouldn't I be able to check the type of element as well? How? Also, is there another way to end the traversal in as3?
View 1 RepliesI am stuck on how to make these changes to an xml using AS3. My xml structure is as follows
Code:
<boys>
<boy>
[code]....
how do you know the parameters (eg height and width) of the element, if the constructor is passed only his Graphics?
View 1 RepliesI saw a post that touched on this, but I thought it deserved a thread of its own for explicit verification. It seemed that some of the resident geniuses here had given the thumbs-up to passing your whole doc or app class to a function. Please correct me if I'm wrong, as this sounds convenient but I assumed it would cause heart attacks and CPU meltdowns.
EXAMPLE: Say I have an app class that controls my entire game (or slideshow), and it has an ENTER_FRAME scrolling function that's 50 lines long with tons of conditionals so I want to take it out and make it an external file. I pop it into a new .as file but now all my variables are out of scope. I could pass them each individually, but there are so many it's impractical. So my question is: good or bad practice to pass the entire class?
[Code]...
i'm trying to pass variables to another SWF using a Loader/URLVariables combo.
I need to know if this way of passing variables should even work. And if not can some recommend a better way.
var uv:URLVariables = new URLVariables();
uv.lang="en";
uv.gameId="123";
uv.profileId="456";
[Code]...
I need to dynamically pass 2 parameter to an swf movie to make it work properly, they are a number and a boolean. To do this I've changed the html page which contains the movie to php, I pass to the page the parameters' values through GET. The values are correctly passed to the page, I've tried to print them.
I build the call to the swf in this way collpreloader.swf?connid=<?php echo $_GET['connid'] ?>&animazione=<?php echo $_GET['animazione'] ?>
collpreloader.swf correctly reads the connid parameter, but animazione results always true.
[Code]...
I've somewhat decided n Anvsoft flv player for a flash website project. There seem to be many of these players free and otherwise, but they seem to all publish for HTML, not from anothe SWF.. The published html is below, and my question is how to call the SWF from Actionscript 2 rather than HTML? I believe I can figure out the rest of the mechanics to a recent education .
[Code]...
So I have an MC that has 6 labels and 6 buttons all with different names. When you click on a button, it needs to direct you to it's appropriate frame label in the MC. Now, since AS 3.0 has done away with inline functions, how the heck do I code it so I don't have a function with a bunch of if statements inside of it in addition to all of my eventListeners that I have to add to each of my buttons? In AS 2.0, I would have done it like so:
Code:
function movePlayhead(whichOne:String):Void{
this.gotoAndStop(whichOne);
} button1_mc.onRelease = function():Void{
movePlayhead("label1");
};
button2_mc.onRelease = function():Void{
movePlayhead("label2");
};
Etc...
With AS 3.0, you have to add eventListeners to each of your buttons where each eventListener calls a function, but how can I write it so I don't have to write a bunch of if statements inside the function the eventListeners are calling in order to test for which button is being clicked? Like so:
Code:
button1_mc.addEventListener(MouseEvent.CLICK, movePlayHead);
button2_mc.addEventListener(MouseEvent.CLICK, movePlayHead);
button3_mc.addEventListener(MouseEvent.CLICK, movePlayHead);
function movePlayHead(event:MouseEvent):void {
[Code] .....
What I want to do is to pass parameters from the browser to flash. I searched and seems like the best way is FlashVars. However, I have tried different codes and can't get Flash to detect the parameters. I decided to follow the example here and just copy and paste the whole thing (just changing the "main.swf" to my swf name): [URL]. The flash loads, but it only shows "param:" without anything else. I gathered that it probably is a more fundamental problem. (e.g. the way I am debugging, or some settings, etc.) I am using CS4 trial version AS3.
View 3 RepliesI want to open a .swf file with a parameter for instance test.swf?beer=good and set "good" (the "good" parameter is going to constantly change) as a variable in the script so that I can add it to the stage in the swf file. The problem is I can't seem to figure out how to read the parameter so that it can be placed in the script.
For instance I have it set to:
var beer = "";
on (release) {
getURL("http://www.google.com/search?&q="+ beer , "_self");
}
I've got 2 files, my Application and a custom component. In my component I have a httpservice and a string named _requestUrl that is bindable. The httpservice uses this.
<mx:HTTPService id="srv"
url="{_requestUrl}"
result="parseHttpResult(event)"
[Code].....
What is the preferred way of passing parameters to a Flex application deployed as a .swf and how do I read the parameters from Flex?
I'm looking for the equivalent of passing and reading URL parameters in Flex land.
I'm stuck with an issue and I cannot understand why it behaves like that. In a for loop, I'm passing the for index as an event parameter. However, the eventHandler is getting the wrong index, but the right target...
[Code]...
What is the best way to send HTML custom parameters to the flash player?Here are some parameters and values I would like to pass:
- autostart: true/false
- column: 1/2
- mini: true/false
- shuffle: true/false
- repeat: true/flase
I have a requirement where-in I have to get an external value to the HTML file and from there the value gets passed to the embedded flash file(swf).
View 2 RepliesI'm trying to create four cubes in Papervision using a for loop. The cube class requires, as its first parameter, a MaterialsList. I've created four different MaterialLists in my code with the names materialsList1,materialsList2, materialsList3, & materialsList4. In a for loop, I'm trying to pass those variables as the MaterialsList parameter. It's not working. If I use the variables themselves in the code, it works fine, so I know my problem has something to do with how I'm trying to data type the dynamic name (see Actionscript below)The Actionscript:
PHP Code:
for (var i:int = 1; i<5; i++) {
[COLOR="red"] var cube:Cube = new Cube(("materialsList"+i) as MaterialsList,396
[code]......
after 3yrs doing this stuff, i feel like I'm still learning the basics of .as and .html and am wondering how I can pass a parameter to another server using Flash. ... Man, how do I explain this? ... An html guy set up his server to display my content- ie: He setup his server..
[Code]....
way to say the same in just a few line of code? 25 lines of code people
[AS]menuAS = function () {
//TIOCCHA
menuBar.menu01.menu01_btn.onRelease = function() {
[Code]....
I give a number of mc's an onEnterFrame event on the fly (in a for loop) which calls an easing function. This function is passed a variable whos value is worked out incrementally, ie on each loop the value is incremented (+.
I do this because I want each mc to be horizontally offset, in other words each clip eases so they come one after the other. Hope this makes sense, ANYWAY the problem the value of the variable (I mentioned above) which each clip uses to determine the postion it has to ease to seems to constantly reset itself. In other words the clips ease right on top of each other since the variable is reset to the last value it obtained from the last increment!!!.
Code:
trace("yes");
panelAmt = 5;
speed = 4;
[code].....
i am loading an image with a loader, and in onComplete function i would like to call calculateRatio function and pass it Loader.content.width and Loader.content.height so it can compare it with the current stage width and height and resize image proporcionally to fit the screen. how would i go about passing that parameters?
[Code]....
I am trying to pass parameters to my .swf generated like this:
file:///C:/Documents%20and%20Setting...inoes.swf?n1=4
And have included the following code in my document class.
private var n1:int = getSWFParam(n1,5);
protected function getSWFParam(num:int, defaultValue:int):int
{
[Code].....
But somehow the code is executing assuming a value of n1=2, although I have not assigned n1 as 2 anywhere.
is there a simple way to pass a parameter in the "new" statement for a class that has been defined in the IDE? Like so:var newInternalClass:InternalClass = new InternalClass (someVar);So that when the new class is instantiated it has someVar to work with?
View 3 Replies{Flash MX 2004 Pro}
[Code]...
The above does not work. Infact the function is not even called. How can I pass parameters to such functions. I dont wanna do the following:
[Code]...
Code:
function enableButtons():void
{
for (var i:uint=0; i<40; i++)
[Code]...
I have 40 buttons on the stage. Their names are contained in the Array musicGrid. What I'm trying to do with this code is attach an EventListener to each button so that it will call the function mgMouseBehavior with a parameter to identify the button. For example, I want the button at musicGrid[0] to call the function mgMouseBehavior(0). I want the button at musicGrid[32] to call the function mgMouseBehavior(32), and so on.
However, if you try to add parameters to mgMouseBehavior in the addEventListener, for example:
Code:
musicGrid[i].addEventListener(MouseEvent.CLICK, mgMouseBehavior(i));
Then you get Error 2007: Parameter listener must be non-null. How would I accomplish what I'm trying to do?
I'm working on a school assignment in which I have to make a basic CRUD (create, read, update and delete) content management application using the Zend AMF framework in FLEX.Basically I create a mock database and have flex print the data from the database into a data-grid. I need to also have an add form, edit+update feature and delete feature. As of now I have FLEX printing all the database info into my data-grid and my add form works as well as my delete button. My problem is I cannot get the update function/query to work. You know:
(UPDATE myTable SET valueName='".$variable."')
What happens is I have it programmed so that when you click on any row in the data-grid, the information is printed back into the add form. Here you can change the values and hit the 'update button' (not the add button) to run the update query on the php file.So my mxml looks something like this:
PHP Code:
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="{amfcall.getDatabase()}">
<mx:RemoteObject id="amfcall" destination="MyPHPclass" source="MyPHPclass" endpoint="http://localhost/FlexAMFCMSapplication/index.php" showBusyCursor="true" />
[code]....
So basically I can send the ID over to the PHP but not other values along with it, in this case the date time and name. How can I send over these edited values so the update function actually updates them?I'm assuming my update function is wrong in either the mxml or the php or both.
I like reusing functions repeatedly so I pass the object to the function (blur, drop shadow, etc.) but if an Event or MousEvent function is involved, I have to do things I don't like. In my example, I had to put the TimerEvent.TIMER_COMPLETE function as a sub function of the setTimer function. I would rather keep the functions apart but I don't know how to pass a parameter to the event function to tell it what movieclip(timerObject) to fade in. Is there a better way to do this?
View 2 Replies