I am working on a Flex mobile application and I want to set initial windows width and height in as3. When my app runs on Desktop, I want to detect screen resolution and set it to windows bounds, something like that
this.width = Capabilities.screenresolutionX
this.height = Capabilities.screenresolutionY
Is there a way to retrieve and set the height and width of an FLV/Playback object via actionscript? I was hoping I could interact with the values via simple _height and _width properties, but that seems to offer all kinds of unexpected results in Flash (like reporting width in the thousands when the width is actually under 300, etc... height seems much closer to reality, but still off.)
View 1 RepliesI built out a scrolling Flash application that currently resizes the browser to whatever the full-screen res of the user's monitor is... I'm kind of indifferent about it.Anyhow, I'd like to be able to set the browser size to a specific height / width instead of taking up 100% of the user's screen real-estate.
View 1 RepliesHow can I set the width and height of a external swf when it is loaded in to the holder?
View 1 RepliesMy Stage size is 126*62. (it's a small animation).- When I publish the .SWF, no problem.- When I publish a projector .EXE file for windows, then, the width is still correct, but the height is higher than 62 : I got two small white bands beside top and bottom of my stage,see ?I don't understand why there's such a difference between publishing a SWF or EXE. And I'm afraid this also happens whatever the Stage size is (small or big, I mean) : you always get these blank bands on the top and the bottom, don't you ?
View 1 RepliesI know this might seem like such an easy issue and I can't understand why I cant figure it out but none the less I can't and I've just about given up. Here's the issue:
I have a sprite container which is supposed to hold a bunch of thumbnails to videos. I am able to populate the container with all the videos and the whole works but obviously if I add a bunch of videos its going to exceed the size of the flash document so I need to add a UIScrollBar (which I did) now the scrollbars target is set to the container but isnt allowing me to scroll and if im correct this is because the container doesnt have a set height. So Im trying to set the height of this container but the second I try setting the height or even width all my thumbnails I used to be able to see are gone! It's as if the size is being set to 0 when its not I've even tried to set it to a specified size just to test and nothing.
[Code]...
I am using this script (3.0) to set the text of a dynamic text field...
stop();
my_Btn.addEventListener(MouseEvent.MOUSE_OVER, onMouseover);
function onMouseover(event:MouseEvent):void
[Code].....
How do I set the height and width of the text?
I want to bring an image in from a folder and then display this image in a specifically sized box.[code]So obviously I want the image loaded into a 200 x 200 box (the image is 1200x1200) and scaled proportionately. What do I need to do? The box won't resize at all.
View 6 Replieslet me know what i am doing wrong here. this DOES NOT WORK.
ActionScript Code:
//add image
imageLoader = new Loader();
[code]......
I gave up on Flash heavy coding when it switched to AS3. Always thought it was less intuitive, longer, and a brand new language and I got tired of trying to keep up when most of my clients did not want to pay for a full flash site. But I got this client...
Here's the problem, I can load a swf into my main stage or into an MC , but I cannot find out anywhere how to set parameters or load into a level so it doesn't replace the current material or fix to a size that doesn't block my other material.[code]...
I have been given the seemingly simply task of resizing a Group container by setting width and height explicitly in response to user interaction. However, changing these values have no effect on the size of the container at all. Changing scaleX and/or scaleY will change the size of the container just fine, but this is not the behavior I am after.I have tried overriding updateDisplayList() to set a specific width and height, but this has not yielded the desired results.
<?xml version="1.0" encoding="utf-8"?>
<s:Group xmlns:fx="ns.adobe.com/mxml/2009" ;
xmlns:s="library://ns.adobe.com/flex/spark"
[code]......
I have a movieclip with the instance name of "container_mc" that I am loading a external swf file into.When I trace(container_mc._width) after the preload it returns 0.Is there any way to tell the movieclip to stay at a width of 760px and a height of 460px regardless of the content that is loaded?Reason being, I then have a function that positions the container_mc movieclip in the center of the stage based on the Stage.width/height..The only way I have been able to get this to work thus far is to have a 760px by 460px square shape, position the movieclip.. then load the content to replace the square shape however I'd rather be able to default everything without having to do that.
View 3 RepliesI am trying to reference to top level (stage) width and height of the main stage for the placement of something located inside a movieclip on the stage.
My code is:
Code:
my_loader.x = (stage.stageWidth - my_loader.width)/2;
my_loader.y = (stage.stageHeight - my_loader.height)/2;
But this seems to just relate to the width/height of the mc that my_loader is nested in...
I have tried the following and had no luck:
stage.stage.stageWidth
root.stage.stageWidth
parent.stage.stageWidth
MovieClip(root).stage.stageWidth
i want to load external images of different height and width into same height and width.
View 3 Repliesi want to load external images of different height and width into same height and width.
View 0 RepliesI would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 1 RepliesI have created a simple audio player to play continuously even if the page is refresh it will play continuously.This is my code to store audio position in flash Temp memory
MySharedObject.data.audioPos = mySndChannel.position;
MySharedObject.flush();
MyProblem,When the player starts the sndPosition is null, so it was not playing. If I set some value, when I am refreshing it will not continue from the last position. How can I set the initial position to play from the start?
How to set a Spark List height to the height of its content?Tried this:
var lastRow:IVisualElement =
myList.dataGroup.getElementAt(myList.dataGroup.numElements - 1);
myList.height = lastRow.y + lastRow.height;
It works in case of a single item, but lastRow is null in case of more items.
I would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 3 RepliesI m having some problems with my menu I m working on.Its weird cus I d already have done the same menu once and worked fine..The selector mark is suposed to "mark" the selection on the menu after a selection is pressed. But I m having problems with the X and y coordinates and scales of the MC and when I click on the option,the MC gets smaller and then bigger to the size I want.Its suposed change scale and position but its not working like it is suposed to work.I m not sure either if I m setting the Mc on the initial x and y coordinates.
View 4 RepliesI am looking at the SimpleButton entirely wrong. Here's what I'm doing (inside of a MovieClip):
[Code]...
the close_btn.width and height remain 0. Am I supposed to just rely on the DisplayObject members of the SimpleButton completely and ignore width/height/x/y or what?
I'm attempting to draw a text box on the screen. If I assign width and height to any value, as in the code below, I don't see anything drawn. Why is this? What is the use of width and height? Adobe's docs say it's the width/height of the sprite in pixels. Why would that occlude or prevent the drawing of a textbox or another box? I assumed the width/height would set the area that this sprite could be drawn upon, but based on this, I'm probably wrong.
package
{
import flash.display.Sprite;
[code].....
I am creating a nav in flex that pulls in buttons dynamically from xml. THe problem i am having is setting the button width to the text width. currently the buttons are all the same width and if the text is larger then it just cuts off. I've tried a few ways of doing this:Setting button width to 100%On creation of the button try to set the width of the button to the text programmatically. Something like evt.target.width = evt.target.textWidth;
View 1 RepliesOnce I've set either the width or percentWidth property on a flex label, is there a way to reset the width to its default (i.e., the width of the text plus padding)? I'm using the label as a renderer. In some cases, I'd like it to automatically size to the text, and in other cases, I'd like it to be a percentage width of its container. Obviously, I could use two separate labels, one for each of the above cases, but I'm curious if it's possible to reset the label to its default behavior.
View 2 RepliesI have a flash banner graphic that I created at 1000px wide by 420px tall. I want this to be fluid and fill the browser width, so that when the browser is rescaled the swf fills the horizontal space. My problem is that there is content below it that needs to touch it, but the height is trying to fill 100% so it is creating vertical space between the flash content and the div below it.
I guess a better way to describe it is that I don't want to define the height I just want the width to be 100%. At 100% height there is unused space so I need to make the height maybe undefined or something smaller then 100%?Also, if you make the browser too small vertically the width will not fill. So I want 100% width regardless of the browser height.
How do I set the width and height of my swf in AS3?
This is my code so far:
package {
import flash.display.Sprite;
public class Game extends Sprite {
}
}
Right now, when loaded it is at some arbitrary default size.
If I can't change the size this way, is there any easy work around that will be consistent?
my .swf goes full screen and changes proportion if it is accessed directly at it's url
[URL]
is it possible to tell how big it currently is? i'd like to reposition some elements accordingly...
I'm trying to change the position of a movieclip I've added to the stage. When I try to access stage.width or stage.height I get 0. I've tried MovieClip(root).stage, DisplayObject(root).stage, root.stage, stage, and simply width and height. All of these are equal to zero.
View 1 RepliesI want to write a shell that creates instances of an app and scales it down for animating. Well, I created my shell class and instanced the app and set scales for x and y and then I traced the height and width because I wasn't sure what they'd be. I thought they'd be based on the stuff on the stage or whatever, but they both came up zero. So I'm not sure how that works, am I supposed to have set those values?
[Code]....
I have an empty movieclip in the stage that holds a backgroundbg._width = Stage.width;bg._height = Stage.height;the background is loaded from XML and works fine since I'm not set the width and heightbut if I set: bg._width = Stage.width and bg._height = Stage.height
View 1 Replies