I'd like to create a simple tween effect like the adidas one [URL] I know it's tween, but i dunno how to do to move on rollover. I want on a rollover to have the same effect, the rectangle grows and other are smaller. ( in AS2) I'll have at least 5 clips.
View 3 RepliesI'm not new to AS, but not very comfortable or good at it yet. I've got a dilema that I don't know how to resolve or how to go about doing. I'm trying to get a disperse/move away effect with some MCs. I've got several similar but unique MCs on the stage. Upon clicking them, they will each popup some text. Now, upon rollover of any the MCs I want the surronding MCs to disperse or move away. Upon rollout they should go back into place. I've searched for ways to do this but have been unsuccessful.
View 1 RepliesI have a serie of movie clip parts from a menu. Each movie clip has an elastic effect on rollover with the following code. it is ok but not smooth enough I wonder how I could smooth the effect. Is there a function for this ?
monClip.onRollOver = function() {
this.onEnterFrame = function() {
if (this._xscale >= 150) {
[Code].....
I've seen it done on sites, and it's totally baffled me. And I'm not talking about those nifty effects where the line twists, and flexes when it bounces back to it's original size, I'm stuffed just with making a straight line have an elastic feel.Here's what I want to do.Have the bottom of the line anchored, and the top part linked to an object which I can move with the mouse. Moving that object will not only stretch or shrink the line, but it would also change it's angle based on where the object is.
View 4 RepliesI downloaded the 'ScrollingWindow' tutorial on the ActionScript page and have customised it to suit my requirement. It works fine. However... I want to use the same type of effect (text sweeping in to a specified _x co-ordinate with an eleastic effect) on a MovieClip within the MovieClip already being used for the effect and controlled by the script. I have looked at this for some time and I can't figure out the correct way to incorporporate both the _x co-ord. and the elastic effect. Please have a look at the attached file.. The bit you will see on the FLA is fine, but I also want to add an animation within each section using the same (_x co-ord + elastic) effect and I JUST CAAAAN"T
View 2 RepliesI have the elastic movement snippet (from Keith Peters), which works fine except for Flash 7 player and higher. In Flash 7 leafes just scatering outwith no elastic interaction. Compiler doesn't throw any errors.I tried Actionscript 2 static strict type variable declarations, but no success.
1 frame
this.createEmptyMovieClip("leaf_elastica", 50);
if(!max) max=4;
[code]....
I'm working on a site [URL] where I'm using an elastic effect on a window that will display the content. Code for elastic is on a frame:
rate = .3;
decay = .4;
window.goal = 50;
window._xscale = window._yscale = 0;
window.onEnterFrame = function() {
[Code] .....
Now all of this code works fantastic when I publish the movie for the Flash 6 Player, but when I change it to the latest Flash 7 Player it doesn't work.
how to make a movie clip have an elastic type effect on it when you can click and drag it and it snaps back into place in a springy type way. Also would like to have a maximum that it will allow you to drag it before it will snap back on its own.I've been Googling for 2 days looking for an answer and have had no luck yet.
View 3 RepliesI am making a ball move from left to right and back. but when I rollover twice quickly, it also accepts the second rollover command. I would like it to accept that second rollover only when the first one is finished. I mean, I want the first to be finished before it accepts another rollover.I know it is simple to solve this with a tween using frames instead of as, but I was wondering if someone knows how to adapt the script.
on(rollOver){
ballTween = new mx.transitions.Tween(balMC, "_x", mx.transitions.easing.Regular.easeOut,balMC._x, 44, .5, true);
ballTween.onMotionFinished = function() {
ballTweenterug = new mx.transitions.Tween(balMC, "_x", mx.transitions.easing.Regular.easeOut, 44,11.9, .5, true);
well i want to make buttons that on rollover move to left, on rollout move back to their initial position, and if clicked, they but stay this time at the final rollover place, and be there until something else is clicked. When something else is clicked, the previous button , returns to its initial place. So i ve got it all figured out except for the freeze and move part when the buttons are clicked. All it does now , is when they are clicked they freeze at the position i want, but i havent got a clue how to update them, after so they start moving back, and reacting on rollover and rollout, when the next button is clicked.
[Code]...
i have an MC (hand) that ive made to be draggable. once the hand is released it should return to its original position....but of course, it doesnt. the code is a slight variation of some i found a while back and have kept in a folder. first frame on code layer in main timeline Code:[code]
View 7 RepliesIt's a bit of decoration to go behind a logo. When the dMove var is commented out I get the appropriate line of squares fading in and out at random spots along the x = 78 axis, but when introduced nothing appears at all...
[Code]....
I will have three seperate pages for the motion tween, mask effect and shape tween... would you make the seperately, in a different scene, as a symbol or on the same scene with the website.
View 2 RepliesSo, I have a tween where a movie clip starts at 0 alpha and ends at 100.. I want to move the clip to a new place on the stage, but when I do it creates a motion path.. Edit multiple frame doesnt work either, so how does someone move a tween if the tween doesnt have a tween path?
View 2 RepliesCan some one show me how to repeat a on rollover effect.currently i am creating tweened scroller i can get the advance button to play. but the back button only goes one pixel at a time.the advance button is scripted liek this
on (rolloer){
this.bar.play();
}
the previous button is like this need this part to loop until the end of the tween
on (rollover)
this.bar.PrevFrame();
}
I am just learning Flash and ActionScript and I am having a tough time with AS syntax. I am trying to create a rollover navigation effect similar to that of Gnomon School.
View 1 RepliesI am having trouble with a piece of code that I used to implement for all of my buttons in Actionscript 2.0. What I need help with is creating a similar effect in AS 3 (see code at bottom of post).
I prefer this code because when a visitor rolls off of the button before it is finished with the rollover animation, it will rewind the animation and give it a smooth rollout effect (instead of an abrupt stop to the rollover effect to play the roll out effect).
[Code]...
My timeline would be setup like this: I set up the rollover effect only, putting stop(); code in the keyframe at the beginning and end of animation. Because of the rewind (prevFrame()) effect it would use the same animation to rewind for the rollout effect.
I would like to do something like the menu on the left hand side of this page: [URL] I am after the effect where the color fades in when rolled over and fades out when the mouse leaves the area.
View 2 RepliesI am creating some buttons for a menu, and am using movie clips so that I can have a multi-frame effect on them when you roll over them. The buttons are flowers that bloom on rollover, and I only want them to play once- so the first time you roll over them they bloom, and then they stay in that state as long as you're on the page.
So far I haven't been able to figure out how to do this. I can create the animated rollover effect, but the next time I rollover them, it plays again from frame 1. I've tried using a variable that increases by one every time you roll over it, and then if it's greater than 0 it doesn't play, but I don't know how to set it to 0 at the beginning without it setting to 0 every time you roll over it.
Currently I have retangular jpegs that are converted to linked buttons. The reason I made these buttons as jpegs is b/c I wanted to use this really cool font that most computers wouldn't readily have. Its working just fine but I wish to have a underline effect when the mouse is rolled over. I looked under the properties of the button but it does not have that option...is it possible to do that in the timeline?
Should I replace that non-underlined button with a jpeg that's been underlined when the keyframe is in the over position? I am using both dreamweaver and flash for the first time; all my content is a single flash swf file inside a box that is centered in the page in dreamweaver.
I find the layout arrangement in Dw difficult somehow and Fl much easier to work with. This is the page I'm working on [URL].
I need to know if it's possible to have an HTML rollOver state effect Flash. I want the user to rollOver an HTML button and when they do, the Flash movie below it plays.
View 3 RepliesI'm pretty new to Flash, and I want to create a button like these.I understand how to make a basic rollover button, but I haven't got a clue how to do animation like that.URL...
View 1 RepliesI'm tring to create a roll over effect. I have 4 Pictures: Let's Say A B C D. If I roll over A I want the other picture to have a transparent light box on top so it looks like A is the main focus. So if you roll over A the other pictures will turn dark and A will keep its color. I can do this by making A a symbol and then putting a transparent png dark box on top of B C D. That works. What doesn't work is when I go back to the original time frame and make B a button also. When I add the roll over effect, it only does it for that. Let me show you in pictures.
<---- that is the original
<---- When I roll over A
<---- When I roll over B
The last two are made using two different flash files. I can't put them together in one. If I put them together and roll over on A, It comes out like this.
I am making a Flash ad for my company. I am a beginner/intermediate Flash user. I need to add a clickTag, which is done. The issue is that I want the button to "shimmer" when it is rolled over. I cannot figure out how to make this work with the clickTag having to be the topmost layer in the file.
This is what I have so far:
shinyButton.onRollOver = function() { this.glitter.play();};clicktag_but.onPress = function(){ getURL(_root.clickTAG, "_blank");};
[code].....
I have the following rollover, release outside effect that I want to be able to link to a web page but no matter what I try I can't seem to get it to work: -
on (rollOver) {
gotoAndPlay("s1");
}
[code].....
how I can replace one movie clip with another when I click on the first one. Below is my code that shows me loading the first movieClip and adding it to the stage and assigning a OnClick listener.
thumbs_button.addEventListener (MouseEvent.CLICK, playVideoButton);
for (var i:Number = 0; i < my_total; i++) {
var playButton_url = "play_now.png";
[Code].....
www dot arcteryx dot com (sorry unable post the link){once u are on the site goto mens(top left) >> jackets (left menu) >> click on any jacket}i figured out the magnifying part by masking but the issues that i have are :1. Snap the position of magnifying glass part to the position of cursor.2. make the cursor invisible3. start drag on Rollover (i think i got this)4. stop the magnification as the user rolls out out the specific area (the jacket in this case)
View 1 Repliesmake the rollover effect on the buttons located here (under Zones):
[URL]
I did this:
ActionScript Code:
function moveX(mc:MovieClip, newX:Number, easeSpeed:Number) {
//trace("moveX Started");
mc.onRollOver = function(){
[code]....
To make a simple rollover with a click to go to another page, I'm thinking there has to be a easier way sticking to coding still. I don't want to place the code on the button but keep it on the timeline like above.
I've got "thumbnails bar" (created with a mask level) into the bottom of my library and above, my image holder where i can see images in their real size. I want to realize a rollover function on my "thumbnails bar" ,that let me scroll all my thumbnails to the next one (or previous one)depending if I'm on the right (or on the left) of my thumbnails bar.I saw that effect on internet but I can find the right code.
View 2 RepliesI'm trying to set a special roll over effect for a movie clip i created. all i need to do is this: when i roll over, it should play from frame 2 and stop where i told him (at frame 5) when i roll out i want him to play from frame 6 and stop where i told him again. (at frame 10). i already did this with no problem except this: my movie clip has a very complex animation i created with other movie clips who works frame by frame style (actual animation). the problem is this: when i roll out after a short time (about half a second) the flash jumps to the rollout part of the movie clip and shows the rollout animation but doesn't finish the rollover animation, what makes the animation to jump (the animations i use is a bit long).
so i'm trying to see if anybody can explain to me how do i make this jump get out of my flash animation. what i mean is this : if i rollover the mouse and stays on the movie clip, the rollover animation is played and when i rollout out of the movie clip the animation continues as usual (this is something i already accomplished). but i want to make this a bit more complex : when i rollover and than right away roll out of the movie clip i want the flash to play the roll over animation and right after that the rollout animation without stopping .... ' i hope i made myself clear with this problem .... for some of you it may seem easy (using some action script tricks or something) but I'm only a beginner who's trying to figure it out ....