Ive got a problem with comparing the currentframe with the totalframes of a loaded movieclip.this is my code
Code: Select allpublic function adLoaded(evt:Event):void
{
ldr = new Loader();
[code].....
I have a problem with a video gallery I integrated into my site...the flash works fine on my local machine and displays videos fine but when uploaded on the server it does not load and everyone gets the message as if we did not have flash installed on the machine[URL]
View 4 RepliesI have been on a hunt for weeks, on and off, but I can't seem to find a solution, or even a direction to look in. Long story short, I am using CS4, AS3, and I can not get any type of preloader to work when accessing it online. I have made my own, tried every example file I could find, but not one of them or the possible solutions I found for them will work.
The example files I have used all work from my computer, both by accessing the swf in a browser, or testing within Flash itself, but once I upload them they have all hit one problem or another. I have had the preloader not show up at all, and show immediately but not count down, depending on the type of preloader it is. The only amount of narrowing down I have been able to do is that I can make a preloading frame, but as soon as that frame tries to find out the % loaded of the overall movie, it stops working properly.At the moment I am simply using:
Code: Select alladdEventListener('enterFrame', preloader);
function preloader (e:Event){
if (framesLoaded == totalFrames){[code]...
I put a movieclip on the frame to show that something is happening, but I have not been able to successfully use code to allow for a loading bar, text %, etc.
Got a movieclip masked by another one with onLoadInit and setMask. Everything works correctly on local but when I use the same swfs hosted on my "server" the mask simply doesn't work, losts its function and shows over the other movieclip as a box.
View 2 RepliesI have just very recently downloaded a trail version of Adobe Flash CS5 onto my laptop. The version of windows is Windows XP, and the program itself is running as well as it should.
I went to youtube to see if there were any video tutorials that could help me get started with the program. Unfortunately, right before a video will play, the browser will say there was an error, and close, and then re-try to open the page.
This problem has never happned before I installed Flash, so I can only assume it had something to do with it. Everything else on my system is running smoothly, I even checked every file and processor twice for any signs of adware that I may have picked up accidently.
i m developing facebook app in which user can set background wallpaper and from friend selector also add friend's album images to board and than click save to create jpg, my problem is all things are perfectly running on locally, but on the server when i add wallpaper and click save the jpg is created fine, but when i add friend album image to the board and click save button the code not working properly it seems to happen nothing but when i delete image from board and than click save the button is working properly,ovide code if necessary ,[url]....click on create poster button and it goes to flash file
View 0 RepliesSo, I have a simple registration form with a datagrid underneath. When you register, your name shows up in the datagrid. It's a list of people who has registered.This all works just like it should when tested locally. Online though, you can only register, but the datagrid won't load the names. It's empty, even though the database has been updated.
View 1 RepliesSo I have an incredibly simple tool that shows some updates from an XML file...In the swf, there is a button that triggers a refresh for the XML file... it works fine locally, but not online...
Code:
stop();
btnRefresh.label = "Refresh";
[code].....
I've an swf (loader.swf) hosted inthat justs loads a swf (movie.swf) hostedloader.swf has a preloader. When I execute the movie in flash, it works perfect, but when I upload the swf, the preloader doesn't works. I see 0% and after starts movie.swf normally.Here is the code of loader.swf
Security.allowDomain("www.dominioB.com");Security.allowDomain("www.dominioA.com");var contexto:LoaderContext = new LoaderContext();contexto.applicationDomain = ApplicationDomain.currentDomain;var
[code].....
I've got an RSS feed coming into my flash site. When I test this locally its all good, everything works fine, I can see the RSS feed and everything. But now when I test online, I can't see any RSS, nothing. Its just blank. Any idea why this might happen?
View 12 RepliesI've created a game in Flash and I'm using Matrix3D and Vector3D. It works perfectly locally, but as soon as I put it on a server, the graphics don't render and I only see a thin line where a sphere should be.
I've done all the imports, but nothing seems to get it working!
I am making flash page and i have put it on my test server:[URL]It works in ie and firefox but not safari. But when i try it in safari locally on my computer it works.
View 3 Repliesi have some problem which i dont think of a reason why it happening. I have some Flash (swf) that send variables to aspx/aspx.cs page. the aspx files are on Web Server, when im testing the swf file local (on my computer) the variables are send and store in SQL. When im upload the swf + html file to Webserver (not on the same server when the aspx files) it does not working. i was tryin to upload the swf file to the same webserver where the aspx file and its working! when the swf on one server and the aspx on other server its not working...
View 3 Replies[URL].. I check it when it is in dreamweaver and everything works and uploads fine. When I put it on host server the video does not play.
View 7 RepliesSo, here is the question. I have a small flash application that sends some variables to a php script (via POST), and that php script sends them to a mySQL database.
This works fine when I'm testing my flash offline, I go to phpmyadmin, and the registry is done. When I upload the swf to a online html, this stops working. It no longer creates another registry in the database. I have no ideia why this happens.
I read a bit about it and found out about cross domain policy, and thought it might be the problem. Thus I made a small .xml file and uploaded it to both servers (the one the swf is on, and the one that has the database), and its still not working.
[Code]...
I'm working on an email form contained in a separate .as file coded in AS3 with a php file. Everything is working just fine when I test it through Flash, having my swf + my .as file locally and my php file online. As soon as I move all my files online, I submit the form, press my send button, see in the bottom screen of my browser than it seems to be a transfer, but nothing happen, no error message as written in my code...i'm just stuck. Here is parts of my codes.
[Code]...
I have a function triggered by a button click that searches through an XML file for an e-mail address (entered in a text field) and returns a match or no match. When I run the swf locally it works fine, but once the site is posted it no longer works. Locally it is connecting to the same xml & php files that it uses online.
View 4 RepliesI found a cool prototype function here in the forums that plays a movieclip backwards:[code]I have the protoype defined on the main timeline of my main file. I call the function on press of a button from an external movieclip after it's loaded into main.When testing it in flash it works beautifully. When I test it online it doesn't work at all. Other code on the button being called at the same time does work (like unloading a movieclip on the main timeline).
View 6 RepliesLike the title says, I found a cool prototype function here in the forums that plays a movieclip backwards:
Code:
MovieClip.prototype.backwards = function() {
this.onEnterFrame = function() {[code]...
I have the protoype defined on the main timeline of my main file. I call the function on press of a button from an external movieclip after it's loaded into main.When testing it in flash it works beautifully. When I test it online it doesn't work at all. Other code on the button being called at the same time does work (like unloading a movieclip on the main timeline).
find out error because mouse down and up function is not working.
View 4 RepliesI'm working on a pretty simple flash application which basically plays a music clip downloaded from a web URL, and makes a stick man dance. I have it all working fine, however, I've used the addChild function on the start button to add the mc onto the stage, however, when I applied the removeChild function to take it off again, I get an error telling me that it hasn't got a caller.Here's the script:[code]I've had my tutor look at it, and she can't work it out either, but I do get the feeling that she's not much wiser on Flash than I am.
View 17 RepliesI must admit I have struggled with this thing for a bit. It seems simple but for whatever reason I can't get it to work. I just want to make something move in AS 3 right now, and so far I've tried puzzling together two different tutorials, but both of them are missing either some source files or further explanation.
Anyway, here is the code (The bit I am having problems with)
Code:
//event listener checks for key presses
stage.addEventListener(KeyboardEvent.KEY_DOWN, checkkey);
//Create keyHandler function
[Code].....
The problem is the checkkey function in the update function. If I leave the parenthesis empty it tells me it needs an argument, if I leave it like that it tells me I need a right paren before colon.
i'm very new to Flash and AS3. I've created a clip and need to link some buttons to some pages on my site but they don't seem to work. Please let me know if nyone can help me...below is my code:
[Code]...
I'm having trouble getting a game to go to the end scene after a collison with a barrier.
Code:
function dead() {
clearInterval(ants); //stop spawning
[code].....
why is this working well:
Code:
with(mc){
_xscale = 160;
_yscale = 160;
[code]....
I can't seem to get the hitTest to work for my script shown below. I have tested using movieclips created on stage during design time and made to collide during run-time. hitTest works fine in this situation.
But if I use the attachmovie command and create a movie on stage during run-time, that clip cannot hitTest with other movieclips. The hitTest simply doesn't work.
The script below is basically, to create instances of enemymc, and it will fall vertically, hitting a movieclip target_mc which is placed during design-time.
var enemyTime:Number = 0;
var enemyLimit:Number = 20;
onEnterFrame = function()
{
[Code].....
Why is the function not working?This is my function:
function add_controll_pannel() {
this.attachMovie("controll_pannel","controll_panne lMC",10);
controll_pannelMC._x="157";
controll_pannelMC._y="186";
}
And this is my function call:
add_controll_pannel;
Nothing happens.
The code that is commented out will work, however, I'm trying to turn that code, since it's used multiple times, into a function.
Why isn't my function working when it's being called?
ActionScript Code:
function displayInfo(_ROLL:MovieClip,_MC:MovieClip, _NN:MovieClip) {
_ROLL.onRollOver = function() {
[Code]......
Code:
var abc:Number = 0
btn.visible = true
btn.buttonMode = true
btn.useHandCursor = true
btn.addEventListener("click", buildIron())
[Code] .....
I tried this code but it didn't remove the event listener.
I'm not getting errors but my program wont call my function.
Code:
this.onEnterFrame = function() {
if(wm == 10)[code].....
I want to change to my end game screen when my value of variable wm gets to 10. Sorry I cant figure out whats wrong with the if statement. It doesnt work outside a function either.