I broke apart all JPGs and converted them to symbols.And they all have correct X & Y coordinates.But while tweening the JPGs shift a tiny bit. Anyone know how to stop the JPGs doing the jiggle shift error?(I've seen it before, and thought I could fix it by breaking apart the JPGs and making symbols out of them, but the JPGs still have that quiver bug now)
View 2 Repliesi have this on my button :
on(release){
this._parent.loadImages(this._parent,this._parent. text1.text);
}
this will load the image that is key in the text field.any idea i can check an error here like:if i key in the wrong file name i will get a text say "wrong file name.!" else if correct file name, load the jpgs..i have this on my reset button:
on(release){
this._parent.text1.text= "";
}
it will reset wht i wrote on the text field. but i still need to unload all the pics i have uploaded.
Here's my example SWF:http:[url]....When it loads, all the sprite instances are lined up pretty well (also when you zoom out all the way they are re-aligned correctly). However, when you drag the board around (shift + click/drag), you can see that they are jostled a little bit, creating weird lines of space between them. This occurs at every zoom level.
I'm using a VCam to simulate the zooming, and the tiles are part of a parent container that uses start/stopDrag(). Is there a better way to go about dragging around the tile groups? Maybe I'm just doing something completely wrong all together that's messing everything up.Code is ready to post, just request a certain section and its yours.
I have a psd that is to be the background of a flash site that i'm working on. I've tried every combination of exporting from photoshop and flash but the end result (in the browser) is always significantly brighter.Does anyone know what the best prossess for keeping the colour of imported raster content accurate in swf while keeping the size moderate?
View 1 RepliesI have a simple movie of a person - torso, arms, legs, each on a separate layer. I'm adding a walk cycle and use tweens to move the arms and legs. This works fine when I export to an swf. But when I group and try to export to a movieclip, the arms jump way up. This seems like a simple problem of adjusting coordinates, origins, etc. But I'm kind of a newbie, so does someone have a suggestion for me? How do I export to a movieclip and have it playback the same as when exporting to a swf?
View 5 RepliesI have a psd that is to be the background of a flash site that i'm working on. I've tried every combination of exporting from photoshop and flash but the end result (in the browser) is always significantly brighter. Does anyone know what the best prossess for keeping the colour of imported raster content accurate in swf while keeping the size moderate
View 1 RepliesI have an issue with links in a text box which are pulled in from a xml file.The problem is that when I have the antialias setting set to Advanced the links will shift their position to the left when you hover over them. If i turn the antialias setting off or to Normal the problem is fixed, but the text doesn't look as nice.
Here are the settings for my textbox.
Code:
bodyText.defaultTextFormat = txtFmt;
bodyText.styleSheet = cssStyle;
bodyText.embedFonts = true;
bodyText.antiAliasType = AntiAliasType.ADVANCED;
[code].....
As mentioned in this post KeyLocation.LEFT and KeyLocation.RIGHT only work a Windows PC, not on a Mac. I found that out the hard way during a presentation today :X
Is there any fix to determine which shift key is pressed on a Mac?
I was just wondering is there a way to say like if BOTH shift and space are down gotoAndStop(3);?
View 1 Replieswhen a moive clip is clicked in my program it's instance is saved in a var _root.dis_one. My code makes the movie clip move when the shift key isn't down according to the arrow keys, and it is supposed to resize the clip if the shift key is down _root.dis_one is storing the proper var, but i am having a trouble with the resizing part. It will rezise a pre-maid movie clip, but it won't resize my dynamic movie clips. is there a certain way to rezise a dynamic MC?
[Code]....
Am having a poke around with an area when pressed, it will reloated the mouse position.I dont think it is this simple.
_root.nozone.onPress = function(){
_root._ymouse = 10;
_root._xmouse = 10;
}
So i am building a site for a client, and in it i have incorporated an automatically cross-fading background made of large photos.Wheneve they cross fade programatically my CPU gets WORKED!
I am using
Code:
if (this.photo1.imageholder1._alpha<100-this.fadeSpeed) {
this.photo1.imageholder1._alpha += this.fadeSpeed;
}
as the fading command. Is it just a characteristic of flash that it HATES to do ALPHA changes?
I have a project where I am loading in an external swf and when it error loading I want it to show the error on screen which I have accomplished and then I want to provent it from going any further . i.e no more frames entered no more axtionscript run
I tried this and got nothing
function ioError(e:IOErrorEvent):void {
error_txt.text = e.text;
trace(e.target.loaderURL);
stop();
}
why the below script does not keep circularly shifting my array (ie. array = [1,2,3,4] -> [4,1,2,3]->[3,4,1,2] etc..)
var myArray:Array = new Array();
var tempArr:Array = new Array();
myArray[0] = 1;
[code]....
How can I pop or shift more than one element of an array in the same time? I have been searching, and I can't find the answer anywhere. My new project is to pop or shift 3 element of an array of let's say of 100 elements, and with a click of a button display them into a textfield having in mind the date factor. If today I click the button, it'll give me the same numbers, all the day; but when tomorow i'll click the button, it will give me another set of numbers all the day long, and so on. Do I make sense and continue, or I just forget about it ? I have the button, the array, how to acces the date, and flash CS 5.5. All I need I believe, is How to pop or to shift more than one element.
[Code]....
differencePercentage = Math.round(((Pay.init / Pay.current) * 100) - 100);
and that gives me the difference in percent between initial and current pay, but it's reversed. When it's positive i.e. pay is above the initial value it says -X%, and when it's below it says X%.
If I encode all colors into one single float value (RGB) as:
//Each Channels are from 0 - 255
red << 16 | green << 8 | blue;
How can I retrieve those color channels back in AGAL? There doesn't seem to be any bitwise operators.
I have attached and sample file with problem that show when you hover over the red link it shift the text. It only happens when I use antiAliasType = advance or my text field set to readability in combination to external or internal StyleSheet.
View 6 RepliesWhat I'm trying to do is take a recording from the mic which is converted into bytearray. It will look something like this
ActionScript Code:
function startRecord():void{
mic.addEventListener(SampleDataEvent.SAMPLE_DATA, micSampleDataHandler);
}function stopRecord():void{
mic.removeEventListener(SampleDataEvent.SAMPLE_DATA, micSampleDataHandler);
soundBytes.position = 0;
[Code] .....
I am trying to make something along the lines of http:[url]....isn't that cool? here is what i have so far http:[url]....
View 13 RepliesI am trying to make something along the lines of [URL] isn't that cool? here is what i have so far [URL] as u can see, i am way off here
View 13 RepliesI've looked in the documentation and found nothing. I'm in MX 2004 pro.
here's my code:
Code:
var arrayName = "name";
trace(arrayName);
var numberofPics = arrayName.length;
[code]....
when it gets to the 'trace("shifted = " + shifted)' it comes back as "shifted = " when it gets to the 'trace("ordered pic is " + shifted)' it comes back as "ordered pic is " so is it just that a variable can't be used as the name of an array when using shift and push?
How do you shift the colors of a bitmap image, with a red/yellow cloud, so that red becomes orange, then yellow, then orange, then red again? The yellow should go trough the same process, but start and end with yellow. Same with all the other colors in between.Kind of like when you play with the hue-setting in photoshop, but instead of looping trough the whole spectrum, it only loops trough red>orange>yellow>orange>red.
View 7 RepliesI found this tutorial on kirupa about identifying keyboard and using them to navigate,however I cant seem to get it to work using (shift) and left, right, up, down.I am going to use left and right arrows for one thing and shift left or right to do another.Does anyone know how to make this happen? Here is my code so far (not working for combing shift and value)
function reactToArrowKeys(keyEvent:KeyboardEvent) {
if (keyEvent.keyCode == 38) {
trace("Up Arrow pressed.");
[code].....
Say I have a video tutorial. This tutorial is one MovieClip we'll call oneMC (with text, movieclips, and sprites within it).I have a color picker that allows the viewer to change the background color.Any ideas on how to shift the color(s) of all the nested objects once this happens? I need everything to contrast with the background color. (hence black text wouldn't disappear on a black background).Changing the blend mode of oneMC to Invert. This works except ALL nested clips then have the same color. No good.I changed the .color attribute of oneMC to a tint of the background color's opposite (for anyone curious as to how you get it, subtract the user's selected hexadecimal color from 0xFFFFFF). This is ok, but not ideal. Colors appear washed out.Changing the hue. This works on everything but black objects/text.I don't want to resort to colorTransforming each individual child because the EnterFrame requisite is too cumbersome. I really need an elegant solution to keep processes down.
View 4 RepliesMy name is jemerson, I'm from Brazil and I'm in big trouble this script only works when I do shift + enter into the flash ... when I open the swf outside flash does not work. I must use it on my website plus it also does not work on the server
[Code]...
I keep getting this error:
TypeError: Error #1009: Cannot access a property or method of a null object reference at
at turntable_XMLlist_fla::MainTimeline/stopSong()
at turntable_XMLlist_fla::MainTimeline/pressHandler()
I keep getting this error. Is this because I stop a track (trk.stop()) before I load it?
Code:
import flash.media.Sound;
import flash.media.SoundChannel;
import flash.events.Event;
import flash.net.URLRequest;
var my_songs:XMLList;
//var my_total:Number;
[Code] .....
I have discovered a bug with KeyboardEvent.KEY_UP keyLocation values for the shift keys. how to reproduce this:
1.when no other keys are down the value for left shift is 1 and for right shift is 2 for KeyboardEvent.KEY_DOWN and KeyboardEvent.KEY_UP
2. when you have pressed shift and then press another key - when releasing shift the value for left and right become 0.
There is absolutely no reason why these values should report anything other then what they initially reported on key down as each key fires its own event with details for each , regardless of any key combinations. Im using cs5.5 windows 7 basic.
I know that you can use the context menu using a right-mouse-click in a control to choose to cut, copy, paste, etc. I've also noticed that you can use the windows keyboard shortcuts CTRL-C for Copy and CTRL-V for Paste.
Windows supports native CTRL-Insert (for copy) and SHIFT-Insert (for paste).
However, within Flex, it seems these do not appear to work. Has anyone been able to either allow these keyboard events?
Here I have given the code what I used to detect alt key is pressed, but i cant get that..
I can only get altKey is false, even i pressing alt key..
it traces like this.. [MouseEvent type="suresh" bubbles=true cancelable=false eventPhase=2 localX=NaN localY=NaN stageX=NaN stageY=NaN relatedObject=null ctrlKey=false altKey=false shiftKey=false buttonDown=false delta=0]
[Code]....