Flash :: Converting It To Big Screen?
Mar 22, 2010
I have to convert a flash file to a big screen it will just be an animation in Flash CS4 and there may be jpeg graphics imported into the animation. I have been given screen dimensions to use but they are in millimeters. This is the information [code]...
The video needs to be DVD quality full PAL MPEG2
1. What should I do to make this scale properly from Flash on my PC to a big screen tv. Do I need to obtain the size of the big screen in pixels and make the animation this size in flash?
2. Also I wondered if you knew what bumper banner means I have emailed the person I am dealing with back and still awaiting a response?
3. I have been told that it needs to be in full PAL MPEG2 can flash convert to MPEG2 and will this have any affect on the scaling or quality of the animation?
4. Also does it matter what frames per second I use I am using the default of 12 fps is this ok?
View 2 Replies
Similar Posts:
Mar 22, 2010
I have to convert a flash file to a big screen it will just be animation in Flash CS4 and there may be jpeg graphics imported into the animation. I have been given screen dimensions to use but they are in millimeters. This is the information I have been given :-
Bumper banners: w- 1,200mm x h- 6,048mm
Full screen: w - 8,062mm x h- 5,184mm
Small screen: w- 8,062mm x h- 5,184mm
The video needs to be DVD quality full PAL MPEG2
1. What should I do to make this scale properly from Flash on my PC to a big screen tv. Do I need to obtain the size of the big screen in pixels and make the animation this size in flash?
2. Also I wondered if you knew what bumper banner means I have emailed the person I am dealing with back and still awaiting a response?
3. I have been told that it needs to be in full PAL MPEG2 can flash convert to MPEG2 and will this have any affect on the scaling or quality of the animation?
4. Also does it matter what frames per second I use I am using the default of 12 fps is this ok?
View 1 Replies
Mar 22, 2010
I have to convert a flash file to a big screen it will just be animation in Flash CS4 and there may be jpeg graphics imported into the animation. I have been given screen dimensions to use but they are in millimeters. This is the information I have been given :-
[Code]....
The video needs to be DVD quality full PAL MPEG2
1. What should I do to make this scale properly from Flash on my PC to a big screen tv. Do I need to obtain the size of the big screen in pixels and make the animation this size in flash?
2. Also I wondered if you knew what bumper banner means I have emailed the person I am dealing with back and still awaiting a response?
3. I have been told that it needs to be in full PAL MPEG2 can flash convert to MPEG2 and will this have any affect on the scaling or quality of the animation?
4. Also does it matter what frames per second I use I am using the default of 12 fps is this ok?
View 2 Replies
Apr 24, 2009
converting a flash exe file to screen savers and also for CD authoring. (with scripts )
View 1 Replies
Jul 17, 2011
I have an AIR application that will go full screen when the application starts:
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE; The stage size is 2560 x 1024. And I have 2 moniters (1280 x 1024 , 1280 x 1024) When I start the application, it shows my application on one of my moniter only.
I need the left side of the stage to be shown in moniter 1 and right side of the stage to be shown in moniter 2. Currently, both sides are shown in moniter 1, and in moniter 2, it shows nothing but my default desktop. *The blue color line is a divider for better visual purpose. How do I make the left side of the stage to appear in moniter 1 and right side of the stage to appear in moniter 2 when the application starts in full screen mode?
View 10 Replies
Oct 27, 2009
Is a command for AS2 to make my movie file play fullscreen (stretch, fit to screen, anything).
goFullScreen(); is great but it leaves white bars left and right. What's odd is that I'm using Adobe Flash Media Live Encoder and it seems to display a perfect widescreen that I want as an input and output but once compiled in flash, it's more square leaving me with white bars left and right. The frame for the video in flash is also widescreen looking.
edit: I ended up stretching the width of the frame but if there is a better way through a command that would make my life easier so I don't have to adjust to every monitor that I run this on.
View 0 Replies
Feb 11, 2009
My question is what needs to be done in order to make a .swf file go into full screen without falling to a black screen when a movie is played? I have tried coding it, however I come up with the following error.
[Code]....
What should I do to fix this? This is not going to be an HTML file, however, so the initial thought of changing the publish settings does not seem to work this time.
View 9 Replies
Apr 24, 2006
I'm creating a flash site. I want the flash movie to fill the entire browser window. What size should I make the canvas, I've been experimenting with sizes and a canvas size of 750*370 fills my browser well on a resolution of 800*600
How do you accomodate different resolution settings? What's the most commonly used canvas size for this type of project.
View 2 Replies
Aug 6, 2011
I have an animated GIF file that I am trying to convert to Flash using Adobe Fireworks. I can't get the Flash version to loop. I want it to replay indefinetely. I have attached the files so somebody can take a look.
I don't know Flash and the only reason I am using Fireworks (a trial version at this point in time) is because another person said this was the best way to do this.
View 4 Replies
Jan 21, 2010
Does anyone know of an effective way to do this, besides using converters? I created a menu like controller that will control the PPT once it's been converted to a swf. I've tried everything, and am hoping I won't have to just copy the data into an .fla by hand.
View 3 Replies
Apr 20, 2010
Does anyone know what the best way is to convert a flash file to a .mov or .avi file?I thought maybe if I did "export" to a quicktime movie, it would do it, but when I was looking at all the settings, there are so many of them, I don't know what to choose!I have received specs that the flash file I have need to be converted to a .mov file, and here are the specs:Video must be a minimum resolution of 720 x 540. It will be resampled to 1280x540. Video chould be progressive video, square pixel (1:1) and supplied in .mpgeg2 or uncompressed .mov format.
View 2 Replies
Feb 6, 2010
converting flash 8 files to mx 2004? i have flash 8 files, but only have Flash mx2004 on my computer at home
View 1 Replies
Oct 15, 2009
I have a game that I made in flash, and now I want to take all the movieclips I have and export the images into something that I can use outside of flash. What would be the easiest way to do this? I would rather not use screenshots, plus, I need to keep the transparency.
View 2 Replies
Jul 28, 2010
I want a little greeter guy on my website. I have received a .mov from Adobe Premiere with a transparent background. I opened this in Adobe After Effects, went to composition->add to render queue, I set the output format to FLV with RGB+Alpha and Audio included. I then uploaded the FLV to my webserver, opened the FLV from my server into Flash Professional, chose a FLVPlayBack Skin and selected the "already deployed" option for the source of my file. I then File->Export to a .swf and upload the .swf back to my server. When I embed this into my home page, the guy does not load all the way, I get about 5 seconds worth. The SWF is around 50 KB and the FLV is around 18,000 KB. The video is 1 minute 15 seconds long.
View 3 Replies
Oct 28, 2010
Is there a application (Or way in coldfusion/VB.net) to be able to convert a swf to a image file? It needs to be ok quality and needs not to be too slow.
View 2 Replies
Feb 25, 2011
I am writing a script that lets a user record their voice and then saves the file as an MP3 format. I'm recording using [URL] which works fine and the WAV is saved. However, I need to convert that file, on the drive, to mp3 before I move it along the pipeline.
I have a lot of experience in the PHP/Python/Ruby/C world, but this is my first foray into AS3,
View 2 Replies
Jun 14, 2011
I have a flash file where i load a remote SWF file into my own, now what i want to do is convert that remote SWF file into a gif that i can save onto my server. The remote file is a swf that has a variable amount of frames, and i somehow need to be able to figure out the amount of frames (i presume), and take a snapshot (picture) of every frame, to turn the taken pictures / into a gif file. That's what i THINK has to be done, however i have no idea if it's even possible to take pictures / snapshots of remote swf files.
View 2 Replies
Feb 27, 2012
I am trying the following to record a live video from my Flash/AIR application: I take a "screenshot" (BitmapData from stage) each frame. I convert each pixel to yuv format like this (V2):
[Code]...
I'm not really a codec expert (just starting ;)), so I don't know what to make of most of that. Here is a zip that contains one of the frames and the video output. What should be visible is a green smiling pear, without any artifacts. Remember the size is 600x700 and the format yuv420. Best to view such raw image files with irfanview, IMO. Don't mind the noise, its from pushing against my microphone ;)
View 1 Replies
Dec 10, 2010
I am creating a full screen projector with flash CS4. In the projector I have more videos, starting from an swf player-
The problem I encounter is this:
The projector starts correctly FULLSCREEN (using AS). The video plays 900x506 correctly. If I click on the player, to get the video full screen, it works. But when I press ESC, not only the video, but also the PROJECTOR looses full screen.
This is a bit annoying. Is there a way to apply the "back to normal size" only to the video? I do not want to prevent the app to be exited from full screen, it's not a problem if the user wants to exit the projector full screen. But not when the user exits the video from fullscreen mode.
How to target only the video?
View 1 Replies
Oct 11, 2011
Fireworks or Flash This question is Not Answered.(Mark as assumed answered) My website was completely designed in fireworks. I'm told that can't be done but home 2000.com, there it is. I now want to switch to flash. I am having an understanding problem in converting the Fireworks png files to Flash.
1. Fireworks I saved as a swf file.
2. I tested the swf. (The file is basically a one-page display with rollovers that would each create a large picture in the middle of the screen when rollover. I believe when I call a rollover might also be called a hotspot. the problem I'm having with the saved swf file is all of the images continuously execute like a movie without stopping. This is in contrast to the purpose of the display area. It is supposed to only display the large image when someone rolls over the hotspot.
3. A third and separate issue is converting the Java navigation displayed on the left side to flash. I have asked many times for help on this and other forums and nobody can seem to come up with a way that I can duplicate, fairly closely, the navigation system that I'm using. it's nothing more than the all typical looking tree menu with two basic issues.
a. Swap out the Menu on top of screen that holds the six hotspots.
b. Swap out the large display area that holds the new eight hotspots.
c. Display an image or text in the TVBox, our term for small display area at bottom of navigation frame.
If you go to my site you will see one of the displays on the home page. Is this a large display area with the eight hotspots that I'm trying to export.
View 8 Replies
Jul 22, 2009
I have managed to put some captions on a video file and would now need to get this video back into flv format to put it online;..I tried with the cs3 video encoder but it wouldn't let me.... So my questions are:
1. Is it actually possible to convert my swf file into flv with cs3 video encoder ...which would be logical as it is a flash file...
2. What is the best option I Have to convert my swf file with captions without losing the captions...
View 2 Replies
Apr 18, 2011
What is the best way to convert an animation created in Flash to a .mov file. I've tried the export movie command in the file menu, changing various settings in the publish settings in Flash and and in the Quicktime options boxes. But the resulting .mov file has all kinds of fragments and artifacts. Has anybody had any luck creating animations in Flash and then converting them into a format that can be assemble in iMovie?
View 7 Replies
Sep 22, 2011
how to convert my curent Flash Professional project into an AIR project.
I've been using Flash Pro to do animations with some minor coding in the frames, and I'm using Flash builder to do the coding. However I realized that my application needs to be able to use the File system, which means I'll need to use AIR's API. However there's no way for me to import AIR's library to my flash builder project
View 1 Replies
May 3, 2010
We are attempting to convert a flash frame into a JPEG without using the Flex SDK or other adobe tools. Right now, we have a flash file that passes binary data over to a .cfm page, which uses the following code to change the headers:
<cfset var = GetHttpRequestData()>
<cfcontent type="image/jpeg">
<cfheader name="Content-Disposition" value="attachment; filename=#url.name#">
[code]......
View 1 Replies
Aug 13, 2010
I have a flash video(.swf) on my website and i want it to convert into such a format so that it remain available from iphone/ipad. Is there any possible way of doing so? Can i convert it into HTML5? If yes can anyone suggest the process and if no, can anyone suggest any other method?
View 6 Replies
Nov 23, 2010
I am using Adobe Air to get data from SalesForce, and present it in a datagrid. I am using a query to get the data, and then put it into an arraycollection that is bound to the datagrid, this works correctly and the data is displayed. The problem is that I want to convert the Account Id in the Event to show the account Name. To do this I am using the following code:-
_serviceWrapper.query( "Select * From Event order by StartDateTime asc", new mx.rpc.Responder( eventQueryHandler, faultHandler ))}
protected function eventQueryHandler(qr:ArrayCollection):void {
var acctIdss:String = "";
for each(var contact:DynamicEntity in qr) {
[Code] .....
This works and displays the Account Name, the problem is that when I use this script and then Sync Changes to SalesForce all the records that have been displayed are identified as needing to be syncronised even if they have only been displayed. If I skip the function eventQueryHandler, and link my query to the OnQueryResult function then there is no problem, but only the Account Id can be displayed. How can I stop Air marking these records as having changed, or is there a better way to achieve this?
View 1 Replies
Mar 4, 2011
I have a iframe for advertisement but google adsense want to flash format how to convert iframe to flash swf
View 1 Replies
May 25, 2011
I have to convert a MovieClip to ByteArray and send it to php using the POST method. The person handling php says that only ByteArray needs to be send and conversion to JPG and PNG can be done from PHP side. When I built the option for saving on the local machine the following steps were used.
Converting to Bitmapdata
Using JPGEncoder and PNGEncoder on the Bitmapdata
Then assiging to byte array variable.
So in this case different byte arrays were used for saving in case of JPG and PNG and it worked.
I found the code to convert movieclip to bytearray in Stackoverflow itself
[Code]...
View 1 Replies
May 27, 2011
I'm trying to convert a string to number and no matter what I do, get strings still.
var lastDigit:Number = Number(e.target.name.charAt(e.target.name.length-1));
trace ('lastDigit is number = ' + lastDigit is Number)
And this traces false. I also tried parseInt and get a type coercion error.
View 4 Replies
Jul 15, 2011
i have a .swf which i have downloaded on the internet it is a animation that i would very much like to have it in my .swf however, when i am loading it and trying to control the .swf i get a error code.TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::AVM1Movie@10d52701 to flash.display.MovieClip.
i searched the net for this error and it is because the .swf is compiled in as1/2 therefore i am unable to get it's "object" and control it.i have also decompiled the .swf and read the codes, but the codes are mostly done in as1/2 and i have no clue what it does, as i just started learning as3 , and have never touched as1/2.the below is the code decompiled, from what i understand it is used to "shift" the parts of the animation. which is a "fish" body part, to create a very smooth, swimming action. i have tried converting it to as3 code but i get errors where it cant find the variables.
function corps(objet)
{
i = 0;
for (;;) [code].............
View 2 Replies
