I'm creating a flash site. I want the flash movie to fill the entire browser window. What size should I make the canvas, I've been experimenting with sizes and a canvas size of 750*370 fills my browser well on a resolution of 800*600
How do you accomodate different resolution settings? What's the most commonly used canvas size for this type of project.
I am creating a full screen projector with flash CS4. In the projector I have more videos, starting from an swf player-
The problem I encounter is this:
The projector starts correctly FULLSCREEN (using AS). The video plays 900x506 correctly. If I click on the player, to get the video full screen, it works. But when I press ESC, not only the video, but also the PROJECTOR looses full screen.
This is a bit annoying. Is there a way to apply the "back to normal size" only to the video? I do not want to prevent the app to be exited from full screen, it's not a problem if the user wants to exit the projector full screen. But not when the user exits the video from fullscreen mode.
How to target only the video?
I tested my skin for YouTube Chromeless player, and seems it worked properly.All graphic elements, including TLFTextFields, are stored in external SWF, all the AS3 code - in loading SWF.I use ProLoader class to load SWF.However, when I tried to attach Player skin code to my Home Page code, I immediately bumped into two issues:
1. TLFTextFields ceased to display proper font;
2. YouTube Chromeless player ceased to enlarge up to Full Screen width in Full Screen mode, whereas all publishing settings were kept the same...
Although I managed to cope with TLFTextField bug by replacing instances with vars in loaded SWF, I have no the slightest idea what to do with those paddings in Full Screen mode... Neither removing all children on stage before loading YouTube Player skin, nor compulsory resetting player's size can't make it work...
I'm tring to make the swf full screen. I published it with scale of 100%.I wish to have some movie clips like text or buttons in fixed size.first, I don't get Event.RESIZE when the stage changed its size second, I try to set their size , but their size is changed according to the stage size and do not stay in the height width values
View 7 RepliesI wnat to display a FLVPlayback full screen the same as when you click on the Full Screen component button.
function goFullScreen():void {
vidPlayer.enterFullScreenDisplayState();
}
var vidPlayer:FLVPlayback;
[code]....
// for Full Screen stage.displayState = StageDisplayState.FULL_SCREEN;// for the normal screen stage.displayState = StageDisplayState.NORMAL;But this code does not fulfill my requirement. I need Vertical Scroll Bar, even I go to the FullScreen, but I don't find any Scroll with this code.Even I tried "window.open" of JavaScript with ExternalInterface, but I couldnot succeed.
View 2 RepliesI have an AIR application that will go full screen when the application starts:
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE; The stage size is 2560 x 1024. And I have 2 moniters (1280 x 1024 , 1280 x 1024) When I start the application, it shows my application on one of my moniter only.
I need the left side of the stage to be shown in moniter 1 and right side of the stage to be shown in moniter 2. Currently, both sides are shown in moniter 1, and in moniter 2, it shows nothing but my default desktop. *The blue color line is a divider for better visual purpose. How do I make the left side of the stage to appear in moniter 1 and right side of the stage to appear in moniter 2 when the application starts in full screen mode?
Is a command for AS2 to make my movie file play fullscreen (stretch, fit to screen, anything).
goFullScreen(); is great but it leaves white bars left and right. What's odd is that I'm using Adobe Flash Media Live Encoder and it seems to display a perfect widescreen that I want as an input and output but once compiled in flash, it's more square leaving me with white bars left and right. The frame for the video in flash is also widescreen looking.
edit: I ended up stretching the width of the frame but if there is a better way through a command that would make my life easier so I don't have to adjust to every monitor that I run this on.
My question is what needs to be done in order to make a .swf file go into full screen without falling to a black screen when a movie is played? I have tried coding it, however I come up with the following error.
[Code]....
What should I do to fix this? This is not going to be an HTML file, however, so the initial thought of changing the publish settings does not seem to work this time.
i am creating an interactive application that will run independantly on a computer.I have implimented the full screen stage display state to a btn, and it works great!
-------code-----
import flash.display.StageDisplayState;
function goFullScreen():void
{
[code].....
however as soon as i add a video [i will be adding several] the video takes on the full screen property, and that is not the desired effect.I have used several diff ways to import the video but as soon as i call the full screen, it goes to an all black screen.
i am wondering from this code, it makes the stage full screen, does it also makes the content of my movieclips scaled to full screen? i have tried this code and it does not seem to do that, how can i make my content to scale to fill a stage's full screen? i have a Movieclip containing a background with a class to make special effects on the background, i am having trouble making the background be "fullscreened" nicely with the stage.
View 1 RepliesMy application is built in Flash Builder. I want to embed a small Flash login form inside an HTML page. The login form is in the 'login' state of code and is a few hundred pizxels wide/ tall. The 'default' state is set to height and width of 100%. I have a resize function that is executed once the login receives the appropriate credentials.
private function resizeApplication():void {
if(ExternalInterface.available) {
ExternalInterface.call("resizeApplication");
[Code]....
#app is the div and overflow is set to auto in the body. This works just fine except that I am left with some visable portion of the webpage near the bottom. I want to be able to either resize the webpage to match the swf or hide everything except the swf. I have tried a few different things with the js including setting the bottom attribute to 0 and using variations of the document.body.clientHeight.
I'm having the weirdest problem. I have a fullscreen function and it works great except when I try to make the current video playing the same size as my screen. Oddly enough it reports that the swfStage.width is 1280 but the videoScreen.width is 852? [code]
View 3 RepliesIf Im going to create a full screen flash website what size should my stage document be?
View 1 RepliesI recently created the following webpage: One challenge I'm having is on the About and Pricing pages. Is there a way to have my text size increase depending on how big the users screen is? Doesn't need to be exact, but if I'm on my iMac the text size is quite small when full-screen.
View 0 RepliesI have an issue with video. I have a full screen projector running Flash Player 10.1. I call the video with this code:
function fbtnclickj(e:MouseEvent):void{
var loadera = new Loader();
addChild(loadera);
loadera.load(new URLRequest("videos/video1a.swf"));
}
The videofile (video1a.swf) uses the Flash FLV Playback component 2.5 (size 320 x 240) and the source movie is external (video1a.flv). The videoloads and runs fine but enters in full screen despite I have configure the component to exactFit. Any way to make it stay to 320x240?
I'm using a typical full size website that proportionally scales on browser resize.
I would like to set a minimum dimensions so the user cannot squeeze the website more than 600x420 for example. The page will then start to crop if you go beyond these dimensions.
i am a beginner in action script / flex framework and i am facing a problem: i would like to have like a menu bar always anchor the bottom of the screen in normal and full screen mode... i try to set my component with bottom = "1" (so it should alway be at 1 pixel from the bottom of the stage ... But .. NO :)
[Code]....
My task is to show a video player in a full screen mode. Ihave no problem doing that but I need it to perform in a such a waythat only video scales to the full screen while other objects(player controls) remain unscaled. If I just go to the fullscreenmode - everything on the stage is scaled up naturally.Playing with the full screen features I could come up withthe only solution which is to calculate a scaling factor (based on,say, stage.width and stageWidth) and adjust player controlsdimensions and position accordingly.Is it the best way to preserve objects sizes or there is abetter technique?I hoped that because each display object has it's own stageand I could show full screen only video by doing something like:
_video.stage.fullScreenSourceRect = screenRectangle;
_video.stage.displayState = StageDisplayState.FULL_SCREEN;
but it still expands all the objects.
I have a flash app that contains a lot of data. Part of it has a video. I want to have an option to expand just the video to full screen mode. I have this working now, however it scales it proportionally based on the size of my flash app. Instead of doing that, how can I expand it to be 100% of the screen width?
Code:
function goFullScreen(base):void
{
if (stage.displayState == StageDisplayState.NORMAL)
[Code]....
I've been trying to attempt to make it so a .flv video will fit to the entire screen of the browser window. ( I already have my .swf file fit to re-size to any browser on any computer. I just can't figure out how to make the video as well) And obviously an external video so the flash file wont take forever to load.The point is this is to be able to have the Video be the background. So I may put content (Links, information or whatever else) on top of the video.
View 2 Replies[ X ] Problem solved I just came up with something i have some trouble to handle I've tried a couple of solution but none seems to work perfectly
What I'm trying to do is simple, get my flash to go full screen, but whatever resolution the user has, my flash must centers itself with the biggest proportion possible, and two movie clips goes right and left of it, as if they were borders.
I've been able to do this with a simple png, but i was not able with a movieclip where his dimension changes through time. ( i have a tween, so the mc gets really big even though just my stage is displayed)
I encountered on the building of my largest flash project to date. The project is a dvd-based presentation with audio, video and text that's xml driven.The project has been coming along nicely but recently a bug has popped up that I haven't been able to figure out. Here's what's going on:
There are three main sections in the swf, the intro screen, the main screen and the content screen. The swf is set to default to full-screen with the resizing and re-positioning of the elements built into a resize handler. Since each screen has different content, each screen has a different resize handler that is removed when transitioning to the next screen before the resize handler is applied for that screen.
For the first two screens, everything is working fine, but when you get to the content (third) screen (where the xml loads), the entire flash movie darkens, and nothing is clickable. This only occurs when the swf is in its default full-screen mode, if you escape full-screen the screen goes back to normal and the nav is clickable again. Also, if you've escaped full-screen mode before you reach the third screen, it remains normal and clickable.
I initially thought that it might be an issue with the event handler for the fullscreen, but the bug never appeared in previous versions with the same code. So I replaced the fla file with one that was not causing the bug and got a functioning swf out of it, even though it was including the same as3 files that the buggy file was including. I saved that file and sent it to the client, who has been successfully publishing from it without a problem. So I thought, problem solved, just a corrupt fla file. But now, any version of the swf that I publish has the problem, even ones that published fine earlier, and aren't using any of the new code that was being used when the problem started occurring. is it possible that my flash app has gotten corrupted or something? Has anyone ever experienced anything like this before?
I am having a strange problem. When I go to full-screen mode in Flash, everything goes blank. The sound added keeps on playing and everything is fine on coming back
View 1 RepliesI have a problem, I have two screens and I will like that when I push full screen the flash not go only one screen and put in full mode I will like that stay in the two screens. Half in one and half in the another.
View 3 RepliesHi, I have got a game, have a set resolution of 1024x768. May i know how can i make my game display as full screen?
View 2 Replieshow to make a movieclip fit to screen in fullscreen mode. I tried with "stage.displayState=StageDisplayState.FULL_SCREEN; ".
But it is now working correctly, it varies when the size of the height and width of the document are changed.
Actaully I am running a cards game. While running the game in between if I change the style portrait to landscape. then how can I detect the screen size and run the game according the screen style (Portrait or Landscape).
Actaully I have written the code to detect the screen as portrait and landscape. But in between if I change the game portrait into landscape, no more it works.
I have a standalone Flash projector running off CD. Currently, I use
getURL("http:url....);
to open the page on default browser. Only problem is the browser window is opening at the size it was last used. I like to see it opens full screen.
So ive been asked to build a page for a real state company and the guy told me it should be similar to these [URL] Ive been trying a couple of weeks so far, but i dont seem to find a way to do somthing similar, i mean, i want to have the welcome screen as those two:
- the gradient background
- flash occupies whole screen no matter what size it is
- gradient expands sideways infinately
- no matter what height my explorer window is, gradient is always in the same position relative to top, and if i keep expanding downwards the background keeps last colour of the gradient.
- the brand logo looks as if it had top, left and right anchors, and it also limitates the minimum width of the explorer window
i though of addind a 3000 x 3000px square with the gradient and centering it, but i know there has to be a professional way of achieving that.