For some strange reason firefox 3 enlarges my swf file.Works fine in all other browsers.My swf width is 750 and in firefox makes it to about 830.Same problem with the height.
View 1 RepliesI am trying to reference to top level (stage) width and height of the main stage for the placement of something located inside a movieclip on the stage.
My code is:
Code:
my_loader.x = (stage.stageWidth - my_loader.width)/2;
my_loader.y = (stage.stageHeight - my_loader.height)/2;
But this seems to just relate to the width/height of the mc that my_loader is nested in...
I have tried the following and had no luck:
stage.stage.stageWidth
root.stage.stageWidth
parent.stage.stageWidth
MovieClip(root).stage.stageWidth
when I layer an swf over html, with all the good stuff in place (wmode = transparent, z-index), I can't access the html elements in Firefox/Chrome/Safari. Here's a link to a test [URL] This is a stripped down version; I've also tried using swfobject.
View 1 Repliesi want to load external images of different height and width into same height and width.
View 3 Repliesi want to load external images of different height and width into same height and width.
View 0 RepliesI would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 1 RepliesI have radioButton controls that are being added to an otherwise empty movieClip. The height of the radioButtons are about 22, and the associated textFields (which I am using so I have finer control) are about 25 high. Once the two buttons are added the movieClip reports its height as 130, which is kind of crazy. I know that textFields have default heights, but tracing the height out of the textFields associated with the rb controls only returns 25, as I said above. Here's some code.
var box:MovieClip=new MovieClip();
var startX:int=0;
var startY:int=0;
[Code].....
I would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 3 RepliesI am looking at the SimpleButton entirely wrong. Here's what I'm doing (inside of a MovieClip):
[Code]...
the close_btn.width and height remain 0. Am I supposed to just rely on the DisplayObject members of the SimpleButton completely and ignore width/height/x/y or what?
this is my code:
[Code]...
as you see the container._height is bigger than the maxh (maximum height) but the _width is just fine... how do i fix this problem??
I have a flash video loading in a modal window. It works in others browsers but not Firefox. Firefox opens the modal window to the correct width of the object, but with no height. I have come to learn that Firefox does not recognize <param> and instead uses the data attribute. However, when I remove this attribute, the modal opens with correct height. Here is the code the modal window loads:
<object width="720" height="520" type="application/x-shockwave-flash" data="proxymovie.SWF?file=proxymovie.MP4">
<param name="movie" value="proxymovie.SWF?file=proxymovie.MP4" />
<img src="images/poster.png" width="720" height="480" alt="" title="Download the video below" />
</object>
I have a flash banner graphic that I created at 1000px wide by 420px tall. I want this to be fluid and fill the browser width, so that when the browser is rescaled the swf fills the horizontal space. My problem is that there is content below it that needs to touch it, but the height is trying to fill 100% so it is creating vertical space between the flash content and the div below it.
I guess a better way to describe it is that I don't want to define the height I just want the width to be 100%. At 100% height there is unused space so I need to make the height maybe undefined or something smaller then 100%?Also, if you make the browser too small vertically the width will not fill. So I want 100% width regardless of the browser height.
How do I set the width and height of my swf in AS3?
This is my code so far:
package {
import flash.display.Sprite;
public class Game extends Sprite {
}
}
Right now, when loaded it is at some arbitrary default size.
If I can't change the size this way, is there any easy work around that will be consistent?
First of all I am new in flash i have one problem that i have added one swf file in site and change increase its width for proper setting in my webpage now what happens is when i am running that page in offline firefox/chrome/IE then all displays good and asper my incresed dimensions but when i uploaded the page on server and then testing online then the in IE it displays perfect but....... in Firefox and in Chrome it displays in small size (in original size, before my edit)
View 1 Repliesmy .swf goes full screen and changes proportion if it is accessed directly at it's url
[URL]
is it possible to tell how big it currently is? i'd like to reposition some elements accordingly...
I'm trying to change the position of a movieclip I've added to the stage. When I try to access stage.width or stage.height I get 0. I've tried MovieClip(root).stage, DisplayObject(root).stage, root.stage, stage, and simply width and height. All of these are equal to zero.
View 1 RepliesI want to write a shell that creates instances of an app and scales it down for animating. Well, I created my shell class and instanced the app and set scales for x and y and then I traced the height and width because I wasn't sure what they'd be. I thought they'd be based on the stuff on the stage or whatever, but they both came up zero. So I'm not sure how that works, am I supposed to have set those values?
[Code]....
I have an empty movieclip in the stage that holds a backgroundbg._width = Stage.width;bg._height = Stage.height;the background is loaded from XML and works fine since I'm not set the width and heightbut if I set: bg._width = Stage.width and bg._height = Stage.height
View 1 RepliesI have two Canvas A and B, A is the child of B.A can be resized by some user actions like adding some UI components to its base.A is bounded by an other Parent canvas B which should show scolling handles if its child A gets too large.I would like A to have the same width and height of B (or really close) while the calculated width and height of A is smaller than those of B.If w or h of A get larger than those of B then A should grow and B will show scrolling.
View 2 RepliesI am using jPlayer library but i don't know how to set width and height[code]...
View 4 RepliesI'm a student for design and want to build myself a portfolio, showing pictures and being able to jump between fit_to_screen mode to actual_pixel_size mode. The following code is just the beginning.
I've wrote the code mixing some tutorials (sorry, but I didn't find a good way to clean it so it'll be more focused) - I'm a really new about action script.
myFile is a mc waiting for an external parameter run_url - a string contains something like "/projects/illustration/alice_in_wonderland.jpg"
You can see the trace command marked as red. I'd expect it to give me a number of the movie clip's width, yet i get "undefined"
import mx.utils.Delegate;
var streamingID:Number;
var fileLoaded:Boolean;
[Code].....
Is there any possibility to change screen width and height not in Flash ( in Properties ), but in Code [ any AS3 line? ].
View 1 RepliesI was wondering if there was a way to set an air app to fill 100% width and 100% height of the screen?
I know how to do it on the web by setting swf address parameters to 100% and setting stage.scalemode and stage.align
I am using FDT to publish my air package with an ANT build. So it does not use mxml, just my document .as class.
How can I use the width and height that's set by the object's embed code within my Flash movie?
I've got items that position based on stage height/width. Problem is although the object appears re-sized when you adjust the values in the embed, the stage size obviously does not change.
Ideally I'd like to position and scale objects based on the dimensions provided in the embed.
i want to zoom the movie clip, for this i have set the movieclip width and height with the button. It is correct or anything els
View 2 RepliesI'm am trying to load an external swf file using a different swf that is on a different domain. I have noticed that it is possible to use addChild on the external swf, but when I try to get its contents width and height using contentLoaderInfo I get a security sandbox error.it is possible to fix it by usingSecurity.allowDomain("*") andSecurity.allowInsecureDomain("*") in the external file.And now it's get tricky, the external swf file is a file that users upload to my site so I don't have control on the code so I can't add the "allowDomain" part.The second swf (the host file that loads the external file) is a file that I let others to embed on their site.The intresting thing is that when I share the host swf on facebook there is no problem, and I don't even need to add the code for "allowDomain" on the external file.I it makes a different, I use HTTPS protocol to access to the external swf
View 4 RepliesI'm writing jsfl script where I'm setting an element width and height. When I go to run the script, my element's width and height are off by what I set it to. For example, I set the width and height to 800, the results I get for width and height are 799.4, 799.0 respectively. I'm not understanding why my element's width and height aren't exactly what I typed in?Btw, I can go into the "size and position" property UI and set them to 800 x 800 and those values stick. It's only when I set the width and height via the element.width and element.height that my values change on me.
View 4 RepliesHere i want to set my SWF heigh and width in 100%.
If i want to increase my height by draging on my SWF corner then automatically the width should change.
So both should be in 100% at any case. how to achieve this.
I have a SWF that I would like to use in an XHTML 1.0 Strict document.My need is that the flash must:- Be 100% width- Grow / shrink proportionally in height (depending on width)- The flash may not be cropped or distorted- I must be able to to put a div just before the flash- I must be able to place a div right after the flash. The flash should behave just as if you pasted below image in an HTML file:[code].....
View 12 RepliesI'm am trying to load an external swf file using a different swf that is on a different domain. I have noticed that it is possible to use addChild on the external swf, but when I try to get its contents width and height using contentLoaderInfo I get a security sandbox error. It seems it is possible to fix it by using Security.allowDomain("*") and Security.allowInsecureDomain("*") in the external file. And now it's get tricky, the external swf file is a file that users upload to my site so I don't have control on the code so I can't add the "allowDomain" part.
The second swf (the host file that loads the external file) is a file that I let others to embed on their site. The interesting thing is that when I share the host swf on facebook there is no problem, and I don't even need to add the code for "allowDomain" on the external file. I it makes a different, I use HTTPS protocol to access to the external swf. I tried to load the crossdomain.xml file, but no luck. What can I do? the only data I need to get on the external swf is its width and height to scale it to the host file.