Media Server :: Keep Multiple People In Sync From FMS?
Dec 11, 2009
I am trying to create a Flex application with a shared viewing experience for users watching video. Specifically, there are a group of users in a virtual room, and one of them is the remote holder. One approach is to have everyone have a video player, and then use our own protocol sent among the different Flash player instances to make sure people are in sync (we have our chat routed over XMPP for the people in the room).
However, we were wondering if there was a simpler way to do it using Flash Media Server. Is it possible to create a synchronized viewing experience in FMS where everyone is always at the same point in the video? And is it possible for 1 person to then have control over that stream (e.g. pause, play, seek, etc.) for everyone connected to that stream?
View 3 Replies
Similar Posts:
Jul 20, 2011
I need to build a website which shows multiple instruments in a band, being played in sync. Each camera/video block is a different instrument, and played together, they constitute an entire band. I have been searching high and low for ways to do this, and it definitely appears that HTML5 is out. It looks like standard FLV progressive download is out, too, because it's impossible to get 4-8 videos to sync perfectly.
I see on the FMS page that it has some abilities in synching. How would one (conceptually) go about making a webpage where say 4-8 videos begin to buffer, then when ready, play in sync? And they would also need to, when the location is changed, all sync to that location and rebuffer.
The objective is so that the user can mute/solo each video's audio, to remove an instrument(s) from the "mix" at any time.An alternative way of doing this, I think, would be to just put the 4-8 videos together in video editing, and encode this into one video, but have each video's audio track be a separate audio channel. If FMS can do multichannel audio on one video, this might work, if it could mix them in/out individually, as the user requires.
View 13 Replies
Sep 15, 2011
What would be the crucial things to optimize when you have hundreds of people connected to your application, with most of them being in a video conference with RTMFP direct_connections, and also some using RTMP connections?
Our app seems to go down under heavy load. - RTMFP stops working (no one can connect to the service with RTMFP NetConnection) and RTMP NetStreams don't work either, however Text Chat works.
Server we use have a connection limit of 500 connections, and 2.5mbps speed limit per connection (a video conference with 4 people uses less than that so it seems fine).
View 3 Replies
Mar 26, 2010
I have an fms app which won't disconnect people in IE unless they close the browser completely. Simply going to another url in the browser leaves their name in the peoplelist. I've tried everything here without success. Even IE 8 shows same problem on Vista. IE on XP works fine as well as some versions of IE on Vista.Firefox, opera, chrome all work fine everytime.The problem, it seems, is IE won't "leave" pages until it's closed no matter what.
View 3 Replies
Aug 26, 2009
I've got a page laid out that houses a nightly live webstream of music at a venue. Every night (except Sunday) the stream turns on from 8pm-2am Eastern Standard Time. Some nights, I notice there is nobody watching the stream, yet the stream plays everyday no matter what. In the interest of saving bandwidth per month, I'm trying to figure out how to only stream if somebody is watching.So basically the camera would be recording locally, and when someone connects to the website something tells the server to start broadcasting. If the person leaves, the server stops broadcasting. Has anyone ever tried doing this? I'm using Influxis for my media streaming and they've assured me I can execute server side scripts.
View 12 Replies
Sep 2, 2009
I want to create a video chat application between 2 people and I want to record the dialouge between the two people to one audio file, so both of then can play back the dialouge at a later time.
View 1 Replies
Aug 18, 2009
We use a Flash component to allow a user on our web site to record from a Webcam on to our own Flash Media Server. The problem we are having is that the video in a 30 second FLV freezes at the 7th second but the audio continues. The video unfreezes after a couple of seconds but never catches up with the audio. At the very end there's a "Fast-forwarding" of video for the last few seconds so that at literally the last moment, everything's in sync. This happens for almost all of our recordings. Has anyone experienced this type of behavior?
View 5 Replies
Jan 21, 2011
I'm trying to record a stream from a webcam using FMS4 developer edition. The streams are recording on a linux box in .flv files. These files though have problems.
1 - The video quality is terrible. Fuzzy/blocky. Any kind of motion looks awful. Is there any way to improve this?
2 - The sound jumps/skips and goes out of time with the video.
As it is now this is useless. I am trying to make a system where a user records a short video from the camera and then I upload it to YouTube from my server. If you use Youtube's webcam page the video quality is quite acceptable and the audio is obviously in sync too, so they must know something I don't. [URL]..
View 2 Replies
Jan 4, 2012
I did a live stream last week using 282,482,832,1500Kbps streams. What would cause the audio to get out of sync with the live video stream? I'm trying to determine if it was bandwidth related, cpu/memory issue on the FMIS 4.5 server, or an issue with encoding PC exceeding it's limits?
View 3 Replies
Dec 19, 2011
I'm having trouble connecting to a remote persistent shared object. When I run from the Flash authoring environment it works. But when I run it from a browser it doesn't. The code attaches an event listener to the sync event, and then calls so.connect(nc).
As mentioned - it works inside Flash authoring only. In both cases the connection to the server is successful. I also tried setting client.readAccess to "/" in the application.onConnect function of the server-side code - but it doesn't help. (Everything was written by me including the server-side application code. I have full control and access to the server).
Also, I can see the remote object exists on the server in the admin console.And as mentioned, when running inside Flash CS5 - the onsync gets triggered after connecting to the shared object.But, the same code under a browser - doesn't trigger the onsync.The SharedObject.getRemote method on the client side returns an object on both occasions.
View 1 Replies
Jan 19, 2011
Is it possible to have multiple FMS installation running on 1 linux server?This mean that each fmsadmin, fmsmaster, fmsedge, fmscore will run under a specific user. (not vhosts of a single FMS install)How will this impact the performance of the other FMS instances in case there are more of them running on the same server?
View 2 Replies
May 21, 2009
I am running into some streaming bugs and am wondering if anyone else has come across them. Very grateful in advance for any help as I've been banging my head against this for a week now.
First of all, I'm finding that no matter what value I set for a NetStream's bufferTime property, the NetStream will not begin actually playing until the bufferLength property is over 2 seconds. This is not what Flash documentation says (that the default value of bufferLength is .1 seconds). Could this issue a function of the FMS configuration with my RTMP hosting account? Is it something I can resolve with my asc file?
Also: In my Actionscript 3 app, I need to pre-buffer a number of video streams so that any one of them can be triggered immediately later in the program. I do this by building an array of NetStreams (within a single NetConnection), then playing each of the streams I need to pre-buffer and immediately pausing each too. This is successfully causing them to buffer in the background, so that they're ready for immediate play when I need them. When I do this with just one NetStream, it works fine. But with more, the streams are behaving unpredictably. They are successfully buffering, but when I need to actually play them and I go to unpause them (Netstream.resume), the NetStreams are generally NOT playing back correctly. Their behavior is not consistent, and they mostly play with no video, or no audio OR video. The one exception is the FIRST NetStream that I started pre-buffering, which is the only one that's consistently playing back fine with its audio and video. Again, if I unpause any of the other NetStreams, they play back with just audio, or not at all.
View 2 Replies
Aug 14, 2009
Another question re setting up FMS to do multiple vid conferences:I have 3 or 4 video feeds being generated from different locations, and those 3 or 4 video feeds are going to be consumed by others. Can I do that through the same NetConnection/FMS application? Or do I need to create multiple FMS applications (i.e. one for each feed)? I currently have one feed on a NetConnection, but I'm looking to expand it.
View 2 Replies
Oct 1, 2009
I want to create folders inside of VOD that I can use to store FLV in and them stream them to webpage.When I do this the webpage displays a white screen.It doesn't seem to find the FLV.
View 12 Replies
Mar 23, 2010
I have an FMIS 3.5 app where I am attempting to publish multiple streams to an edge server.I have found that if I loop through my list of streams and attempt to publish to the edge server (i.e. as fast as possible), the publishing will fail They succeed if I have some delay between the publish calls.
View 4 Replies
Apr 1, 2010
I was told by my FMS host that even though FMEL can create multiple streams at different bit rates I could not send them. I need to use a different entry point for every stream which meant a different encoding machine for each rate.
View 1 Replies
Jun 17, 2010
Can Flash Media Server 3.5 do the following?. Can it take multiple live streams?. Is it possible to control the ip streams - by using API's in to the Media Servers?.
View 4 Replies
Jul 29, 2010
I can stream live 1 Axis IP camera with FME 2.5. How can I stream multiple IP cameras with FME 2.5?.
View 3 Replies
Nov 24, 2010
Is it common to have issues when there are more than one Recording SWF on an html page?I have 4 SWFs on a page, each with the capability to record, They all use the same FMS application but record and playback different FLV files.Could there be an issue with the NC being shared and then causing grief?
View 2 Replies
Jan 28, 2011
Trying to output to multiple servers - tried launching multiple window of FMLE-but get an error message with the second broadcast attempt.
View 1 Replies
Dec 13, 2003
First: I want to create a sort of webshop and I want to create a MySQL database in which people can sign up/log in.How can I create this in FlashMX + PHP + MySQL.I want people to log in, sign up and the database should register what people bought the last time(s) they visited.
Now for my second question:For this shop I have a section on the homepage with news.This sections needs to display the news and have a link to the archives.Each newsitem is an images that contains the news.How can I make Flash loads in the news dynamicaly and let Flash detect if there is an archive (archive = more than 3 newsitems in folder) and if there is one, display it?
View 3 Replies
Jun 16, 2009
I'm struggling setting up 4 live audio sources with fms 3.5. I have 4 streams input from our studios into 1 encoder server. From here I need to pass it to the internet via 4 FMS 3.5 servers. I do not want to have 4 * 4 encoding sessions on the encoder in order to service the 4 FMS servers. Is there any way to pull the streams from the encoders? I have also tried configuring explicit connections using 1 server as an origin server and 3 as edge servers but being a live stream the load and connections seem to get passed to the origin server which will eventually not handle the load. I've looked through the application.xml server settings but cannot seem to see any noticeable settings?
View 6 Replies
Sep 7, 2009
I am developing an application where I need musicians to play together and I want to have an audience listen to it. I have created my publisher clients and they can create the streams, but now I want to take those multiple streams and combine them so that you can hear the guitar, singer, etc. all together.
View 8 Replies
Feb 5, 2010
Can Flash Media Encoder handle several video sources and live srteam them all at the same time? We want to stream a few over the air broadcast sources using Flash Media Server v3.0. Is it possible to install several TV tuner cards into a PC and have Media Encoder live steam each of them at the same time? If not, can several copies of the software run on the same machine (each with it's own video source live streaming)?
View 3 Replies
Feb 10, 2010
I trying to make a application for multiple videoconferencing, in which more than one peaple can join. During my analysis I have got one issue: Suppose four users are making a conference meeting and all of them are publishing their respective videos. All the video are displayed on on each screen. But due to limited connection and bandwidth I am making connection or viewing each publisher one at a time in every 15 sec, which make still image. but I want to clear the video of the respective person who has either logged out or stop publishing. I have tried the netstream event i.e netstream.unPublishNotify but it works only when I have made connection for viewing. But sometimes it happens that I have no connection for viewing for that perticular person as per the timer. so I want to know who is publishing video at the time of making connection for that perticular view. How could it be possible to know whether the live stream is coming or not at the time of view.
View 1 Replies
Feb 17, 2010
I'm having a problem with Flash Media Interactive Server 3.5. I have a simple application setup. I would like to simply to be allow the user to record multiple flvs. This is just because we want them to record, preview and either publish or try again.
[Code]...
to start and stop recording. The problem I'm having is that while the first record seems to go ok, the second gets garbled. The video starts about 70% through, and then just plays a small portion. I've tried meta injection to fix it up, but it's just not working. I'm thinking maybe I have to reset the stream or something before starting a record again, but I don't know how.
View 18 Replies
Apr 28, 2010
I have developed a Player where I am using FMS to play MP3 files, it works great in normal scenario but when user keep on clicking new songs from Song List (List Component) then the player stated playing all songs. Which It should not do. Is there a way that we can unload previous song before loading new song.
View 5 Replies
Feb 10, 2011
camera.addEventListener( ActivityEvent.ACTIVITY, onTriggerRecordStart );
Or do I make sure that the above script is only called once?
UPDATE
Can I register two different functions to the same event?
View 8 Replies
Apr 5, 2011
am setting up multiple multicast sessions, i generated configurations for each session using a seperate stream name, IP address, port.
1) Is it possible to run multiple multicast session.From configuration, looks like we can, but need confirmation
2) How can i test these sessions using the default player ? or any sample player
View 1 Replies
Sep 23, 2011
How can I play flv files continuously..?? I have developed code for playing flv files in my browser. Those flv files are streaming from flash media server. I can play files individually, but I want to add one button to play multiple flv file continuously when one button clicked. How can I play those multiple flv files continuously...??
View 1 Replies
