Unable To Login To Admin Console With FMS4 On Amazon EC2
Jul 18, 2011
I can start an instance of Flash Media Server 4 on Amazon EC2, using the Adobe public AMI, and I am able to view the vod and live media samples without any problems.
I can SSH into the running instance, and I can also bring up the Admin Console web page for that instance in a browser. However I have not been able to log in to the Admin Console.
Before trying to log in to the Admin Console, I have edited /opt/adobe/fms/conf/fms.ini and inserted a username and password, then I saved the modified file.
I have also updated my security group to add a custom TCP rule to open port 1111.On the Admin Console page login fields I have kept the default server name of Server 1.For the server address I have tried both localhost and also the public DNS address of my EC2 instance.I have used the username and password that I put into fms.ini.
View 2 Replies
Similar Posts:
Jan 20, 2011
We can't login to the Admin Console. After we enter credentials and click login. Error message comes up. "A script in this movie is causing Adobe Flash Player 10 to run slowly. If it continues to run, your computer may become unresponsive. Do you want to abort the script? "if we say no, it comes back. If we say yes it aborts script but we never login to admin console.
FMS is running fine, it just seems to be the flash movie that can't open. We have set it up to allow each website we are running to have its own application. since we have 1500+ applications running, we think this might be the issue. Can someone let us know if there is a application limit per server running FMS and/or should we take the 1500 websites and have them all share the same application?
View 1 Replies
Feb 17, 2009
i can't login in admin console, fms 3.5, linux ES5
[URL](it prompts incorrect id/pwd after login)
I can do it in the server, localhost, successfully!
server add: 192.168.1.44 or 192.168.1.44:1111 or
192.168.1.44:1112
id: mint
pd: video123
[Code].....
View 2 Replies
Oct 26, 2010
I reverted the admin console account on a new setup of Media server 4 and it will not let me connect or login using the "administrator" login? Does it set the password to some defaut? This is all new to me as this is my first install of this server. How can create a new admin login? How can I change to login?
View 1 Replies
Jul 12, 2010
New to FMS, testing FMS Developers versions.Connect and Live stream works fine using FMLE.Problem is I'm not sure how to get logged into the Admin Console.I'm not sure about what the "Server Name" is or the "Server Address". Is that just the IP address or the IP plus something else? How can I tell?FMS install was done by tech at hosting company and he forwarded this info:[code]
View 14 Replies
Dec 15, 2010
I just set up a new copy of the official Adobe Amazon Machine Image for FMS4.One show stopper: it seems to require a license key in fms.ini, just like any other FMS4 install.The master log file has "invalid license key" in it. We tried giving it the "Activation key" no dice.There's a license directory in /opt/adobe/fms with 3 .bin files.We tried entering the path to that directory for the license no dice.The docs don't say anything about it.I've spent over 3 hours being transferred around Adobe and listening to elevator music(code).........
View 6 Replies
Aug 7, 2010
I did a standard install of fms on a fedora 12 dedicated server yet I can not access the Admin Console via http[code]...
View 4 Replies
Jan 15, 2011
I installed FMS 4 on my notebook and I was able to access the console without trouble. I used localhost for the server address. When I installed it on a remote server (Windows 2008), I can't get in. I tried the same thing. I opened it from the file system [URL] and I tried localhost but it didn't work. I've tried other values
[URL]
One problem could be that I installed Apache but there is already a IIS server using the port 80. When I look in the service panel, FMSApache says it is starting but not started.
View 1 Replies
Apr 11, 2011
Anybody know how to configure SSL just for admin console acccess ?
View 1 Replies
May 3, 2011
Im having trouble getting the FM Administrative Console to connect to my AWS FMS. I have an instance running and can view the default page and samples. I opened ports 1111 and 1935 and have also modified the fms.ini file to include a user name and password. Restarted the FMS as well.
View 1 Replies
Aug 8, 2011
We just installed our FMIS on Amazon services (EC2) and cannot log into the admin console. The server is running fine and we can resolve the web interface. Is there any configuration of ports or additional user accounts other than the install credentials (root/XXXXXXX).?
View 2 Replies
Oct 18, 2011
I recently setup Flash Media Server on Amazon EC2 and things are going well so far; however the admin console wont login. I've set the username, password, and port in the config file and opened that port, among others, in the security group. I've then restarted both FMS and admin server multiple times.
When I try to login I get no errors. Nothing happens at all. When I open FireBug and/or Fiddler2 to watch the communication, I'm not seeing a single thing happen. Clicking "Login" submits no requests at all. Do I just not understand how FMS works? I would assume some sort of request would need to be made.
View 1 Replies
Mar 17, 2011
I have a FMS server running that I am hosting some VOD content on. I am using HTTP dynamic streaming to deliver this content. Everything runs fine from a technical standpoint, but I am unable to see the connection details in the Admin Console. I have loaded vod -> defaultinst under the applications tab in the console. No connection details populate.
View 1 Replies
Jan 12, 2010
My employer has a Flash Media Server that I wrote a little streaming video app for a couple years ago.Well, the videos have stopped working and I've been asked to troubleshoot. I fired up the fms_adminConsole.swf and connected to my server. Now, it's been a long time since I've messed with the server, but if I remember right, there was a big list of apps on the list on the left hand side of the "View Applications" view of the console. When I log in, there are no applications listed. If I hit the "New Instance" button under the empty list, I'm presented with a list of all the apps I think I should be seeing in the Applications list. If I select any of these, a new application instance appears in the applications list, and I'm prompted to give it a name, the default being "_definst_". If I hit enter to create this instance, it remains on the list and instance data appears on the right panel until the console refreshes, and then all that vanishes and I'm back to an empty applications list again.
Going to "Manage Servers", I do see a list of applications under the applications tab that I expect to see. The app that streams the video that's having problems is there on the list.
Is this typical behavior for the Flash Media Server Console? Shouldn't I have a list of apps in the "View Applications" section of the console? I've created about a dozen to date, and they're all listed under Manage Servers > Applications, but not under "View Applications". Can anyone point out if I'm doing something wrong here or missing something?Or can someone confirm that I SHOULD be seeing something under "View Applications" and that there is indeed something weird going on with the server.
View 2 Replies
Mar 2, 2010
I'm attempting to view Shared Object data in my FMS Administration Console, but I consistently get the error:Object encoding error; terminating connection.I'm using Flex 3 with FMS 3.5, I'm positive that everything is using AMF3. The Shared Objects do seem to work. I can connect to the shared object through another instance of the app and pull saved data but they are not inspectable in the administration console. Also,very often when a new instance connects to the server I get a RangeError and all of my Flash Player instances crash.
View 9 Replies
Jun 25, 2010
I'm running FMS 3.5. My live streams and recorde streams work fine. Whenever I am in the Admin console though, nothing displays or reports. These screen shots are displaying the FMS server activity while several videos are being streamed around Europe:
View 1 Replies
Oct 28, 2010
I just installed FSMS 4 and could not log into the administration piece (the login s would fail) even though I was using the ID and password specified in the fms.ini file.
During the installation I had specified a different port for the administration port. I changed the port back to 1111 and I could log in with no problem.
Why is the admin login failing if I don't use 1111 as the admin port number ?
View 4 Replies
Jul 7, 2009
I have installed the FMS 3.5 Server on a separate IP from our main Apache Server: The server is running Redhat Linux 2.6.18-128.1.10.el5
FMS 3.5 running on ***.***.**.138 using ports 1935, 8080 (Admin Server using port 1111)
Apache 2 running on ***.***.**.139 using port 80, 443. (several sites setup on this IP)
However, when accessing the fms_adminConsole.htm in the root directory of one of the domains on ***.***.**.139, all login attempts fail. I am connecting to localhost and using the assigned user and password set up in fms.ini. Using either IP fails as well. The FMS server is set up to listen to all hosts as no specific IPs were set.
/var/log/messages show that FMS and the Admin Server are up an running and listening:
Jul 7 12:15:37 228215-web1 Service[28196]: Server starting...
Jul 7 12:15:37 228215-web1 Service[28196]: Server started (/opt/adobe/fms/conf/Server.xml).
[Code]....
All other settings for FMS are default. This is my first time setting up FMS as a fresh install on a new unknown server and I am at a loss as to what settings to check or which files I may need to modify to get it to connect properly. It is a managed server is hosted by rackspace.com if that makes any difference.
View 5 Replies
Jul 18, 2011
Randomly on Sunday night the FMS Admin Console which you can access via [URL] stopped working, as in it would not load. It times out and Firefox says 'Server Not Found' It was working fine on Sunday morning and has been doing for a year now, I rebooted the server and that did nothing. I have no idea why it will not load as the server runs fine and I can still stream and everything.
View 20 Replies
Feb 27, 2012
I have a flex 3 app that is attempting to load images from Amazon S3. The images fail to load, so I fired up debug mode. In debug mode, the images load, but I also get the following output in the debugger[code]...
View 1 Replies
Jan 17, 2010
How can we automatically configure edge from the admin console of flash media interactive server?
View 1 Replies
Nov 1, 2011
I've set up FlexUnit in my app, I want to debug a test using trace, but im not sure how to get flexunit to traceto the flashlog file. Here's part of my test task in ant, I thought the 'localtrusted' property would help, but it doesnt seem to. In my logs I get the testcases only, none of my traces which are inside my tests.
[Code]...
View 1 Replies
Apr 1, 2011
I simply can not login to the admin server. I'm connecting to the flash admin-frontend which is hosted on the same server which the FMS is running on. The FMS version is 3.0.1 and it's running on RHEL5.
I've set the user and password in conf/fms.ini. I have checked that I have permission to connect in conf/Users.xml. Everything seems like it should work, but it just won't let me in and when looking in the logs (logs/admin.00.log) I just get a lot of lines saying "Failed login attempt from."
Apart from this the server works. We are still using it for streaming and we have been able to login to the admin interface before, but it was a long time ago and now it just won't work anymore.
View 3 Replies
Nov 1, 2009
I want recieve infomation for recorded stream in FMS Server. so, i tried use Admin api(getRecordedStreams or getNetStreams). but, returned below code : NetConnection.Admin.CommandFailed .
Below my code :
import flash.net.NetConnection;
import flash.net.NetStream;
import flash.events.*;
[code]....
View 2 Replies
Jul 2, 2009
We currently have an issue with in our Citrix farm with Windows 2003 Servers (x64, R2, SP1) Where Flash Flash 10,0,22,87 is installed and working fine when logged in as a Domain administrator but will not work as a normal (non administrative user) to confirm I've given a user who it did not work for Domain admin rights and it started working straight away. I'm using (and published within Citrix) the 32bit version on IE for compadibility reasons and have also tired this on a Window 2003 Server (x86 R2 SP1) and am getting the same results so I have to assume the issue is with Flash and not with my setup.
I've tried the following recommendations:Remove with Adobe Flash removal tool and Reinstalling via website with an Domain admin login using the change user /install command Remove with Adobe Flash removal tool and Reinstalling via install_flash_player_ax.exe installer with a domain admin account using the change user /install command Allowing Domain users Modify Premissions (to both the Directories and Files) to the M:WINDOWSsystem32MacromedFlashswflash.ocx & M:WINDOWSSysWOW64MacromedFlashFlash10b.ocx Following KB article [URL] and applying the premission changes recommended Following KB article [URL] and checking the registry premissions on these items I've enabled all ActiveX and Java related IE options in Group Policy to allow the to run for the Internet Zone When going to [URL] either as a Domain admin or a Regular user it confirms that "You have version 10,0,22,87 installed" Still I cant seem to get flash components of websites to load when logged in as a non Administrative User.
View 1 Replies
Aug 17, 2009
I have a need to build a flash login page. No big deal, but I need to have six seperate login accounts. For example:
Username: user1 Password: pass = link to [URL]
Username: user2 Password: pass = link to [URL]
Username: user3 Password: pass = link to [URL]
and so on for up to six users.
Again the usernames and passwords would not change, but need to redirect the particular user to a certain page.
stop();
var user_input = "";
var pass_input = "";
login_button.onRelease = function(){
if(user_input == "user1"
&& pass_input == "pass"){
getURL([URL], "GET");
}else{
gotoAndStop (3);
}}
View 7 Replies
Nov 10, 2004
how could i make a login form for people to use to login to a certain area?? like for instance on this website [url]..... at the bottom he has a client login form....how could i do that?
View 4 Replies
Nov 9, 2010
where is the source code for the multicastplayer sample that is located in <installed directory>AdobeFlash Media Server 4 oolsmulticastmulticastplayer directory? The StrobeMediaPlayer does not use the same html code and does not playback a rtmfp multicast stream.This is the code used in the multicast sample player to pass the manifest.f4m file into the player to playback a Multicast Stream which is not used in the StrobeMedia player sample.
var flashvars = {}; <!-- Add manifest file location e.g. flashvars.manifest = "manifest.f4m"; --> flashvars.manifest = "manifest.f4m"; <!-- Enable debugging --> <!-- flashvars.debug = "true"; --> <!-- Adjust buffer time  - default is 4 seconds --> <!-- flashvars.bufferTime = "10.0";
View 4 Replies
Mar 30, 2011
I'm trying to figure out how can I mix two NetStream objects into one FLV file using Flash Media Server 4. Saving one stream isn't problem but I have two concurrent streams (one is pure audio from Microphone object and second is Camera+Microphone) and I want to save them as single FLV using NetStream.publish(streamName, 'record').It will be kind of live chat but only with one video.
View 2 Replies
Feb 20, 2012
I can create (AC3 and FMS4) remote sharedObject (but it's not listed on FMS admin panel, either on local server running on winXP Pro). When I trace results I see firstame value "myfirstname":
<...>
public var _so:SharedObject;
<...>[code]...
but when I want to get these values from another swf and browser with the same connection details, I don't receive anything. No ideas about returned errors, but i think it should be o.k., as I use like this to receive _so values:
<...>
_so = SharedObject.getRemote("myRemoteData", nc.uri, false);
_so.connect( nc );
View 1 Replies
