Actionscript 3 :: Multiline Text Handler In Flex?
Jul 10, 2010i've been working on texthandler in flex.
the refernce site i m using is [URL]
does n e body have worked on multiline text handlers
i've been working on texthandler in flex.
the refernce site i m using is [URL]
does n e body have worked on multiline text handlers
is there a way to span the text of a link button to 2 lines? so instead of "Save Page" to be in one line only, I want it to be in 2 lines.
View 1 RepliesIn Flex I want to create a Text file and it is working, but the problem is all inputs are written in one line;
here the cods
addText.text="[
"
[code].....
How do I center text in within the border of a multiline Dynamic text field?
View 3 RepliesIs there a way I can stop a single word splitting over two lines when putting dynamic text into a fixed width, multiline text field?I have a simple method of checking if there are more lines than words and then running a while loop to reduce the font size until there are the same amount or less lines than words. But this doesnt always work, if say the final word of three is quite short and the second word splits over two lines then I still have 3 words and 3 lines.
View 3 RepliesI created a comboBox(Using the one in Component/Flash). I am unable to make the texts in DropDown menu to be shown in MULTILINE. I have tried larger Row Heights and smaller texts so the issue is related to something else.
I found this piece of code searching in archive discussions "TextInput(aCb.getChildAt(1)).textField.multiline=true;"
[Code]....
When you want to have linebreaks in a multiline text in AS you should write this, right?
Code:
var mytext:String="This is
what
I want";
so you have a 3-line text. ok, so i have a textfield, and its content will be loaded from a xml file. in my xml i have something like this:
[Code]...
I have some text pulled in from a db via cfm and remoted into flash - I'm trying to figure out a way to determine if whether or not a given string requires the vertical space of a multiline text box.Visually, two lines take up more space than a single line and when the string only takes up a single line, the second (empty) line creates to much whitespace and has everything below it too far away from that initial single line. When the string can fill both lines, it doesn't look bad at all - so, ultimately, I'm trying to get that whitespace gone.
View 1 Repliesi did a flash form for the first time.I have a multi line input text, it works fine when u type in the content.But when i hit sent, and I checked my email, the whole message is in one single line. All my other fields work fine cos they are single line input text.All my Variables are sent to my asp and then to my email.I guess my asp file did not capture the vbCrlf and convert it to <br>, am i right?
View 1 RepliesI have a multi line input text, it works fine when u type in the content.But when i hit sent, and I checked my email, the whole message is in one single line. All my other fields work fine cos they are single line input text.All my Variables are sent to my asp and then to my email.I guess my asp file did not capture the vbCrlf and convert it to <br>, am i right?
View 3 RepliesActionscript Code:
form_comments.onSetFocus = function() {if (form_comments.text == "Your comments") {form_comments.text = "";}};
my input field instance is form_comments and the default text I have in the field is "Your comments" the same code (with obvious changes) is working fine on my single line fields... just not this last one?
how to do the SUBJECT? Is it even possible? As soon as I put the textfield multiline, I cannot align it to right at all. The help only writes about left alignment in multiline textfield.Does somebody know some workaround?
View 2 RepliesI have problem with the multiline. The problem is that I have put multiline to true, but the text is still on one line?
[Code]...
I have a problem with the text on them.I want the text to wrap, autosize and be multiline - ie I want the button to be a certain width and if the text is longer for a particular button the button will be higher with the text going onto the next line.The wierd thing is that it worked, I went and made a cup of tea, came back and it was not working! Maybe the cat changed my code but I cannot see where.
[code]...
i have a text area, set to multiline. For some reason, when my text imported from xml shows up in the box, it starts several lines down into the box. So for example, my Text box is positioned with the top at the midpoint of my stage, but the text starts about 3/4 down the page, about half way down the text box. Can someone please tell me why this is happening and what I can do to fix it?
I noticed that when I put my cursor in the box and move it up and down, the rest of the text 'scrolls' into the frame, but otherwise it's cut off.
How do I set the text wrap (multiline) for inputText box components?
View 3 RepliesAnyone know of a good reg exp that can do this, optimally in one go? It needs to remove whitespace at begin/end of each line, remove LFs and CRs and replace with a single space but if there's a <br> (or <br/>) at the end of the line it should not add a space. I'd need this in a JavaScript conform regexp.
View 1 RepliesI have been asked to add support to a xml based website. I have been looking into it and have realised that it is not going to be very straight forward. The text does have english phrases in when describing products being used.
After doing some research I have found that CS3 does not 'support' rtl text. I also read that CS4 has added support, is this worth looking into? I read that it was buggy.
I found FlarabySWF which does what I think I am after, but not for all the languages I need, and only at design time rather than runtime.
I also found Gchats TextBox 3.0.0 but this didn't seem to work.
I also found some solutions using CSS, but these didn't seem to work with multiline text. See this example. It also didn't work as the text I am trying to display is bi-directional ..
Actualy, importing Arabic text is not a problem, but dealing with bidirectional text of Arabic and English within the same line is a big one.
I have a TextField with multiline and word wrap enabled, and a fixed width. I want to calculate the total height of the text inside it. I tried using TextField.textHeight, but that gives me the height of one line. Because of the wrapping, I can't easily calculate the number of lines to multiply it with the line height. TextField.height just gives me the fixed, default height of the field, 100 pixels.
View 2 RepliesDoes the TextField class support automatic vertical centering of multiline text? Any way to control vertical alignment other than "flush top"?
It seems like it ought to, but if there is a method or property in the class that turns it on, I can't find it. (Maybe a case of not being able to see the trees for the forest, there's so much junk in there, plus the TextFormat...)
I'm running into an issue where, if the dynamic text field I create wraps and autoSizes to 2 lines or more, the last disappears (sometimes partially). However, this only happens when I apply a DropShadowFilter to it. If I don't apply the drop shadow filter, it renders correctly. Note that whether or not the text renders correctly, flash seems to know that the text has wrapped and autosized, as this is how i assign the Y position of the second text field below it. See code below:
[Code,,,]
I am using Flash CS3 and AS2. I have a dynamically generated text string that is displaying in a multiline dynamic text box. This dynamic text box is inside a container movie clip which contains everything that I want my user to be able to print (other dynamic text fields, graphics etc.) When I view my swf on screen it displays exactly as I intended - if the text exceeds the text-box length, then it word-wraps. But when I print the container movieclip, the overflow is hidden and does not wrap to the next line.
View 1 Repliesim completely lost on how to do a simple multiline label. The docs say that labels are best used as single lined elements, but that alludes to it being able to do multiline if necessary. Anyone have any clarification on the subject?
View 3 RepliesMultiline htmlText scrolls on drag selection of text
It also scroll on mouse wheel event..
var css:StyleSheet = new StyleSheet();
css.parseCSS('.red-text{font-family:"Lucida Grande";color:#ED1C24;font-size:10;font weight:bold;leading:-8;}');
[Code]....
I have a dynamic textfield on the stage which is rendered for HTML. Then I load the xml text in it, but the CDATA html tags are not working(it works on singleline, but not on multiline)
I tried setting wordWrap/html etc to true but nothing seem to work.
i was wondering how i can print multiline text to a dynamic textbox using a varible..
eg
textbox="line1";
the get it to print line two ON TEH SECOND LINE...
When I create an empty input text-field and compile, the curser starts at the 2'nd line when I click the text field! Is there a work-around to get the initial curser position at the top?
View 2 RepliesIs it possible to display a multiline string in a Flex DataGridColumn?i.e. Display:
Text line one.
Text line two.
I've tried putting "
","
"," " when storing the string but nothing seems to work.Currently only "Text line one." is displayed and the rest is hidden in the cell. I would prefer not to use "wordWrap=true" to emulate this behaviour in the cell, but instead be able to manually put in newline breaks (although I could turn on wordWrap to avoid long text from hiding due to cell dimensions).
If you are using Flex 3.5 (not my choice) and you scroll the mousewheel over a Text component with multiple lines of htmlText, it will scroll down 1 (sometimes 2) lines, even [URL] I made sure there is not a blank line below the body of text (it ended after the closing). Notice how the top line is now cut off, and an extra line was added at the bottom.
View 2 RepliesI am trying to determine the height of a Spark label that becomes multiline at runtime (due to width property being set), to account for text overflow.
(For a spark label named Title) I have tried:
Title.measureText(Title.text).height - this seems to return only the height of one line. (Due to differing screen-sizes and font rendering, I don't know in advance how many lines the text would overflow to...)
Title.height - this seems to return the height of the label size (before being re-adjusted at runtime for multiline text flow)
Both properties above return an unchanging value even when different text lengths/multiple lines long are filled in .text
Is there really no way to determine the exact height of an overflow Spark label?
I am admittedly not that familiar with the Flex API but after scouring the manual for quite some time, I am still unable to place this title label with the proper spacing.