Actionscript 3 :: Create The Step ArrayCollection For The Datagrid?
Sep 24, 2009
I am working with google map api ... http:[url]..What i want to do is to take up all the steps of direction, and place them in a datagrid.but the problem that the google map api provide description on in HTML format. and then i put this steps data in my flex datagrid, it shows up all the html tags in it too, including with the data.Can there be some way i can do this, without the html tags.My code for the google maps look like this :
private function processTurnByTurn():void {
var stepText:String;
var stepMarker:Marker;[code]....
This is the function to create the step ArrayCollection for the datagrid and the datagrid code looks like this:
I'm using FlashBuilder 4 and trying to create a dropdownlist that populates a datagrid. The functionality is fine but my data is being chopped up too much. Currently every since "nepName" tag in my XML file is showing up in my dropdownlist (which makes for many duplicates of the same names) and only shows the data associated with that nepName tag. I want each nepName (by name ex. Barnegat Bay National Estuary Program) to display only once in my dropdownlist and populate my datadgrid with ALL the data in the XML file that is associated with that name
I have a flash template in Flash AS - 2 , with a initial sound that triggers at the very beginning in full sound. Now what I want to slowly mute the sound gradually step by step up to the loading of the home page. How can I do that? Worthless. I attached a very simple fla with sound. There is a stop action and at this point the home page is loaded.Now how can I mute the sound slowly upto this point.
how to code is a small 12-step volume bar. For each increasing step a white dot should show, so when the volume reaches maximum 12 dots would be shown. Same goes for when the volume is decreased, each step will remove a dot (from right towards left) until the mimimum of 1 step is reached. To turn the volume up/down two buttons should be used, a "-" and "+". I'm not asking for a design or complete code, "just" a hint or walkthrough. Been trying for several hours now.
i am new to flex and need to learn how to use the flex builder 4 IDE is there a step by step tutorial to learn 2ndly i need to know about the following:
event model validation cycle display list List-based controls, item renderers, AdvancedDataGrid, list interfaces
i apologize if this post is redundant. i'm searching unsuccessfully for recent, step-by-step instructions on how to set up ActionScript 3, Flex 4.5 and AIR 2.6 with TextMate on Mac OS X. i've found several posts concerning required bundles, but most of the threads are a few years old in addition to having convoluted, sparse instructions for setting up. it seems that auto-complete and .swc files are supported, which is great. in addition to instructions i'm also very interested in learning about what isn't supported and other common pitfalls.
i've been familiarizing myself with TextMate's UI and it's amazing. i would much rather use it than Flash Builder / Eclipse, or even Flash Professional. one last question - i understand that it's possible to set up our own keyboard shortcuts to compile with MXMLC and write the .swf to disk. is it possible to have the .swf auto open in Flash Player Debugger after it is compiled. essentially, i'd like to continue using Command+Enter shortcut for testing movies in Flash Professional to build and launch since i would certain have a difficult time adjusting to new muscle memory.
I�m mostly a beginner with flash actionscript. A site we advertise on asks me to embed a clicktag script to help them track the stats for each banner. I�ve read the directions on macromedia/adobe, I�m still a little confused. I have to make the whole banner clickable, so can I just create a movie clip on the top layer, make the alpha 0% and add this script to it to do so?:
on (release) { getURL (clickTAG, "_blank"); }
I�m looking for more thoruough step by step instructions to ensure that whatever I hand over to them will work.
I would like to know if it is possible to control the property of movie clip with the enterframe event until it meets a particular condition then if it does another one.
1) My MC (this) of size 50% increases by 10% on enter frame until it reaches 150% of it's size
2) When it does reach 150% it then starts to shrink by -=10 until it gets to 100%
3) When it does get to 100% it goes and plays a particular label inside this MC's time line.
I need this funtion to be reusable, so that several MC's can call it on the timeline.
I tried with the following similar code:
limitX=this._xscale; limitY=this._yscale; //define my variables
[Code].....
Don't worry about the synthax of gotoandplay is just to illustrate, basically this does nothing and I have been told that is is because I redefine limitX everytime I call the function, but how do you get around this?
I need to be able to create a flash movie that allows me to step through it with a button.
For instance, a little opening shows, then a button comes up and when you press that button, you go to the next frame, to press another button to take you to the next frame, and so on and so on...
I put the button(s) on their own layer, and I had it working, but the first two buttons you had to press twice to get to the next frame, after that it worked fine.
I what to do a website in flash with CMS but I don't know where to start. Is there an open source CMS that I can use or a tutorial that could guide me step by step building a CMS?
linedataColl is an AC that contains 200+ of rows extract from CSV and in my design, I wish to additem into SuperDataCollection object by object but the only problem was I'm unable to see any data display in "S" which is a datagrid. What wrong with my code?
var superDataCollection:ArrayCollection = new ArrayCollection(); var dc:ArrayCollection = new ArrayCollection(); var di:Object = new Object();
I have a Datagrid with an ArrayCollection as DataProvider, the arrayCollection is partially generated by a remoteObject call, the dataprovider seems to works at least until I try to edit the field...By the RemoteObject I only receive an ArrayCollection with the field ip, but the datagrid looks for the fields ip, check and save...If I add/edit this new field it works, but only under particular condition
This code always work in the 3 points, so at the end of the call the ArrayCollection is always filled with the new values, but the datagrid refresh the items only in point #1 and #2.
I am trying to bind an ArrayCollection result coming in from the server to my DataGrid created dynamically in AS. The result data is not getting Displayed in the Grid. var dg:DataGrid = new DataGrid(); dg.width=650; dg.dataProvider=someArrayCollfromServer;
I am adding the dgColumn as runtime based on some data from a XML and it is the same as defined in below static format. But if I use the same code and create the DataGrid as a Flex Component as below, it works fine. <mx:DataGrid id="dg" width="100%" height="100%" dataProvider="{someArrayCollfromServer}"> <mx:columns> <mx:DataGridColumn dataField="Value" headerText="Value"/> <mx:DataGridColumn dataField="Code" headerText="Code" /> </mx:columns> </mx:DataGrid>
This works fine. Is there some functionality or implementation different as far as DataGrid is concerned in Flex and AS.
I use this arrayCollection to populate a Flex 3 Datagrid. I'd also like to use this arrayCollection to populate a comboBox with the Name node.
In the arrayCollection, I've got the Name listed twice. I've got two rows in the Datagrid.
If I set the ComboBox's labelfield to Name, then the Name will be listed twice in the ComboBox menu. Is there a way to use this arrayCollection and have each Name listed only once in the comboBox?
I can always make another loop and array collection for the Name, but I was wondering if there were a better way.
var i:uint; for (i=0; i<myArray.length; i++){ myDGArray = [
I create a DataGrid to display a XML file and I have used XMLListCollection before. But when I modified the XML file, the DataGrid does NOT refresh itself automatically. I googled for this problem and found these links: refresh flex dataGrid
I've got a Flex 3 application with an HTTPService returning an Atom feed. I catch the result from it and store it in an arrayCollection which is then the provider of my Datagrid. I have no problem accessing the data from the "first-level" of my Array, but cannot go under it. Not very clear, so here is some code:
The "title" column shows the data correctly, but the status column is empty ! When I launch my app in debug mode, I can see that my notesArray has the correct format and I can access todo -> status with the value..
Is there a way to make a Flex 3 Datagrid show only the first node of an arrayCollection, instead of showing all of the arrayCollection's data?[code]...
I would like to create a new AC instance with a dynamic variable which is nca1, nca2, etc. Without define using hardcode variable name, it is possible to do that in a loop?
I have an ArrayCollection [{category: "fiction", title: "The Time Machine", author: "H.G. Wells"},...] of objects from which I want to create checkboxes that:Are divided into sections with section headersAre displayed horizontally, i.e. the checkboxes appear left to right and continue onto the following lineAnyone know how to achieve the following displayFICTION[] The Sleeper Awakes -- H.G. Wells [] The Time Machine -- H.G. Wells [] The Invisible Man -- H.G. Wells [] War of the Worlds -- H.G. WellsI tried using an itemRenderer, but it didn't quite achieve what I want:
linedataColl is an AC that contains 100+ of rows extract from CSV, I wish to add item into SuperDataCollection object by object but the only problem was I'm unable to see any data display in "S" which is a datagrid. What wrong with my code?
var superDataCollection:ArrayCollection = new ArrayCollection(); var dc:ArrayCollection = new ArrayCollection(); var di:Object = new Object();[code]......
i have a problem using the itemRenderer functionality. When using an ArrayCollection the visible Data in the DataGrid using the itemRenderer will be rendered just fine. But if i start scrolling the entries are repeating in the cells using the renderer. The cells are not filled with date according to the id. What mistake i'm doing here.
I read a lot of the explainations like:
[URL]
here is the code for the set data function (itemRenderer is extending HBox):
override public function set data(value:Object):void { _data = value; if(data!=null)
I am developing one small demo application. In that i have created one action script class named City which has two fields. cityId, cityName and i have also mapped this class with my backend java class City using tag RemoteClass. at Java side City class contains same fields as in actionscript city class.
I'm new to Flex and am using TileList bound to an ArrayCollection. The array collection is empty at load time, and then updates with the results from am HTTPService call. The problem is that the item renderers aren't being rendered as expected, I'm guessing because there was no data when they were first rendered at load time. Here's simplified example:
I have a advanced datagrid and populating some data by using arraycollection. And i am filtering the arraycollection, the arraycollection index got changed.
