I have a loader that loads main application. Everything works fine, except one issue:
When main application is loaded, animation in loader freezes for few seconds (5-8). I think during these 5-8 seconds main application creates it's objects.
I tried to minimize number of objects in main application and it did help a bit, but freezing problem is still there.
How to load content without freezing?
I am working on a simple navigation right now, and I'm getting a strange behavior from it. The first time the page loads, everything works fine, the rollovers work and everything. But then, if I click one of the nav buttons to go to an inside page, and then go back either by using the Back button on the browser or clicking "Home" in the inside nav, the Flash nav on the home page freezes after a couple of seconds.
The link to the project is: [URL]
Here are my two classes.
Main.as
Code:
package {
import flash.display.MovieClip;
import flash.display.Graphics;
import flash.events.*;
[Code].....
I'm have made some buttons (movie clip) and when I click on it, I want a file (home.swf) to load in a loader (mx.contents.loader) and I want the other buttons to do the same, all load into the same loader. I have no Idea how to do that. The way I have it set up now, the home.swf will load over the entire screen and that is not what I want. I just want the content to load into the loader and have its content change once I click on the other buttons. Here is a copy and past of that I have at the moment, I'm using Flash 8 to do it all.
[Code]...
I have created 2 Flash movies in the form of a slideshow. The flash clips are embedded in the webpage that I was modifying and it works perfectly fine. What I would like to do is to allow users to be able to click on the flash image in the web pages. Once clicked, a new pop-up window will appear and it will show the freeze image of the flash that was being clicked at the moment. Currently I am only able to make the new pop-up window and the flash still played through itself in it while I need it to freeze and be static.
View 4 RepliesMy web page, which contains a SWF using AS3 opens great in Chrome, Firefox, & Safari. When I open the page in Internet Explorer it freezes on the preloader for some reason I can not figure out.
View 3 RepliesI have created 2 Flash movies in the form of a slideshow. The flash clips are embedded in the webpage that I was modifying and it works perfectly fine.
What I would like to do is to allow users to be able to click on the flash image in the web pages. Once clicked, a new pop-up window will appear and it will show the freeze image of the flash that was being clicked at the moment.
Currently I am only able to make the new pop-up window and the flash still played through itself in it while I need it to freeze and be static.
Flash seems to crash/freeze when clicking through to other applications.
i cant get any work done because its crashign all the time.
I have a project I am working on, it has zero coding most all symbols are graphic because it seems the movie symbols don't export correctly. I export it to swf and it hands 100% of the time when it is at about 80% complete. I have gone back in and optimized tons of it, and it did not change a thing.
View 3 RepliesI produced a site a year ago [url]... and recently - since my last update, its been freezing at the preloader on older browsers... (on one computer it didn't work on IE, I downloaded firefox to it and worked fine)
In that same browser that it doesn't work I can go to the SWF directly and it will load, although if I load it through the HTML page it will freeze as described.
I'm having an issue with a file uploader i'm working on. Certain files, it seems files over 7mb will not upload, nor give an error, it just silently freezes when it starts.
This is on a MediaTemple [dv] with the php.ini modified so that max_file_upload = 100M, same issue.
Here some ActionScript for yashortned a lil)
Code:
var listener:Object = new Object();
listener.onSelect = function(selectedFile:FileReference):Void {
browse_mc.filename_txt.text = selectedFile.name;
[Code]....
i have a simple preloader in frame 1 (scene 1), and the rest of my movie in scene 2.
the preloader is:
//Import the required assets
import flash.display.*;
//Create a listener to call the loading function as the movie loads
this.loaderInfo.addEventListener (ProgressEvent.PROGRESS, PL_LOADING);
[Code].....
I have a piece of code like a the end of a timeline, most usually looping back to frame one or a stop() if I let the playhead play through to this frame then flash will freeze!
View 1 RepliesI have been using the new unloadAndStop() function to unload some loaded SWFs after they are no longer needed. This has been working fine whilst testing in flash, and when I have tested it using firefox. However, to my utter horror and despair unloadAndStop() seems to be crashing safari and IE8. I haven't tried IE7.
After replacing unloadAndStop() with the old unload() the crashing stopped. So I am certain this is the problem. unloadAndStop(false) also caused flash to crash. No error was displayed.
This project has been 7 months in the making and involved a lot of hard work in the evening and weekends. I noticed that it was starting to lag after being in use for a while because SWFs weren't being released from memory. When I say lag as well, It's not like normal frame rate slowing down lag, the whole application will simply freeze up for a couple seconds, and the freezing lasts longer the longer the app has been running. I have gone through and made sure to null almost every variable myself, and null any variable in the loading swf that points to anything in the loaded SWF. It appears to be working now using the old unload() function, but will need more testing to be sure because the lagging only turns up after the application has been running for about 45 minutes and has loaded and unloaded several SWFs.
Anyway, is there anything that I can do about this or am I missing something obvious? I haven't found any other posts about this, has anyone else had this problem? Why does god hate me so much?
Sort it out please Adobe, I really don't think it should be this hard to get rid of a loaded SWF. If you were in front of me right I would be screaming at you.
So I recently got a new laptop. It came installed with Windows 7 64-bit and Internet Explorer 8. However, after installing the current Flash Player update, IE started freezing. I would open certain pages, and the browser would become unresponsive, leading me to end the program. I would try it again, and still the same result. The culprits were always the same, hotmail and tvshowsondvd, among others. Internet Explorer 9 was released a few days later, so I uninstalled IE8 and installed IE9.
The browser worked fine for a few days, but then it started to do it all over again, with the same web pages! Then I noticed something, all these pages were heavy in flash objects. So I tried uninstalling Flash Player 10 and guess what, it started working! No more problems loading pages. I can no longer view flash objects, especially on YouTube. I haven't had the problem since, but I need Flash Player installed.
I'm trying to run the example application from the FlarManager download. It worked first time using the FlarToolkit engine, but the webcam freezes if I change to the FlareNFT tracker. The only change I've made is to the onAdded function:
From this:
this.flarManager = new FLARManager("../resources/flar/flarConfig.xml", new FlarToolkitManager(), this.stage);
To this:
this.flarManager = new FLARManager("../resources/flar/flarConfig.xml", new FlareNFTManager(), this.stage);
When using the FlareNFTManager it compiles but freezes the camera feed. No errors are thrown, but the FlarManager event handlers are not triggered (e.g. onFlarManagerInited, onMarkerAdded, etc.).
I've developed a flash-based site for a client who has an account with GoDaddy and have uploaded all files successfully to the hosting server. The site consists of an initial preloader named "preloader.swf", which loads an external SWF file named "main.swf" that contains different sections including an image-gallery section.However, I notice that at times (as not always this happens) the initial flash preloader for the main flash-based site loads faster than usual with "hiccups". This results in when having to view an image in the gallery section of the site (where each image is loaded externally from the server having a preloader of its own), the selected image loads in a jagged manner with "hiccups" (for instance from 22% it pauses then jumps immediately to 31%, then pauses again and jumps immediately to 47%, and so on).
Then, at a point in time, the preloader suddenly freezes/hangs the entire site, having no other choice but to refresh the site.Only then, once the preloader of the image has froze and the site is refreshed, or the cache is cleared, will the entire site work perfectly as supposed to - i.e. the initial preloader loads more slower and smoother, and the preloaders of when the images are loading are more smoother as well (no sudden jumps in the percentages as before; the preloader loads in normal increments).how I can make the site load smoothly always without having to encounter any hiccups, freezing and hanging, as I've been checking my code over and over again but I can't find anything wrong with it?I was doing some research and read that the cause might be because of the following line "ProgressEvent.PROGRESS" as it might not fire at times in IE or Firefox. Is that so? If so, what alternative must I take?[code]
I have a link from a HTML page which opens another HTML page with my .SWF embedded, AND opens the .SWF on frame 2 using an anchor point on the timeline.
My problem is because all my actionscript is on the 1st frame, once its opened on the 2nd it runs thru the movie back to the 1st frame. When I put a stop(); on frame 2, this freezes all my buttons on frame 2.
I have a mask transitioned 2 pic banner I'm using for a site. Everything appears perfect and am happy with the result.
After a while in ie7 or Chrome (indeed possible any browser!) the transition will freeze - most often mid transition! I have racked my brain trying to figure it out and can only conclude it is an issue with the loop killing the cache of browser or something.
It's an ol' favorite AS2 fla of mine and was taken from a FLASHMO template. how the original that mine was built from and see any problems with cache or runtime etc.? Would a conversion to AS3 fix?
flashmo website > flash templates > page 13 > bottom > flashmo_039_mask_effect
The difference with mine is it does not run after click, it loops.
I'm having trouble with some TIMER EVENTS here and I really don't know how to proceed.I've got a lot of instances of TimerEvents in my code, all triggered by TIMER (myTimer.start() method). They work nice however, somehow, some of them simply freezes and it doesn't continue to execute the timer event function.I'm using about 80 papervison3D cube instances and all within by jiglib rigidbody.
View 2 RepliesUrl...He wants something similar but his site will be 100% flash and so this will have to be done form a flash form.I'm having problems even getting this running from an HTML form. I've done my best here:URL...but since I don't know the original output settings of these flv files I'm trying to load over the submitted page, the versions are messed up and when I run the form, I keep getting prompted to download flash player.Do I need to embed these flv fiels of presenters I have and plonk them into a swf file and then load that swf file from the form, rather than link directly to the flv?I'm tearing my hair out over this - I thought I'd be able to work it out easily from the numerous pages out there that offer the same service but there don't seem to be any resources online that point me at creating a form to load flash content over a submitted URL.
View 2 RepliesI would like to create a Flash menu but want to load HTML inside a targeted div on the same page dynamically without refreshing. I've seen several people say iframes can be used but I would prefer to stay away from iframes and use divs if possible. I'm guessing some fancy javascript would be required?
View 1 RepliesI'm loading several pictures into my movie. How can I set the order of which one should appear first? Do I add an listener or how should I do it?
View 12 RepliesIn one of my project, I will load a swf after a button click. I use Loader and try to access the document class by Loader.content as Movieclip. But I find if the target swf contains TLF and if you set the publish property to RSL instead of "merge into code", the content of Loader will be set to some "__Preloader__".
View 2 RepliesMy company standard is IE7I'm charged with developing flv that will auto play on PC from a removable thumb drive.in addition it should be able to launch a url.I'm using CS4 Flash and Dreamweaverdeveloping on a Mac.I've used action script 3 to program buttons that start, stop and launch urlI've worked everything out on a Mac.it works fine in Mac environment. when I try load the html web page on the PC with IE7 the flash content (either a swf or flv embedded using Dreamweaver) does not load.IF I leave the IE specific html in the code IE7 returns a message that flash player needs to update. - IT has installed the latest version of flash player.If the swf file auto loads and plays then Why is that a problem?I've not been able to test the code on any other version of IE
View 5 RepliesI have a preloader that I downloaded... What I want to do is have this load only a certain percentage of the move before it continues to play the file.I assume that I have to edit the line of code that gets the total amount of bytes for the file itself... expressed below:
Code: Select alltotal = this.getBytesTotal(); // Movie Length
Since the variable is 'total' how do I make it load only 25% then start? I
Code: Select alltotal = this.getBytesTotal(25); // Movie Length ?
Code: Select alltotal = this.getBytesTotal() * .25; // Movie Length ?
i have some MCs with embedded buttons for "home" "about" "contact" etc. they seem to work just fine. i also have a MC clip (main_stage) in the center of my stage into which i'm trying to load jpgs (from an external file called home_back.swf) as backgrounds by clicking on the buttons. this does not work at all and i'm about to drink a gallon of hemlock to end my frustration.[code]i have since gone to MC/buttons to get some nice animations going as it seemed simpler this way, for the buttons at least. but now the above code doesn't work...apparently because that's button scripting and not MC scripting. so my question is how do i get these MC/buttons to link the external .swf jpg's to MC content box? if there is a simpler way to do this i'm all ears.
View 5 RepliesDoes anyone know how to load dynamic content (movies, text, or whatever...) in flash that automatically changes daily, depending on the day of week (mon.-sun.)
View 2 RepliesIm making a main page that will load different content into one loader. I have the loading URLRequest calling a variable for the link and then on a certain button click it will change the swf to be loading.The problem is this: This code is being called in a movieclip inside the main timeline called "loaderHolder"
[Code]...
I have a loading bar in the first frame of my flashfile, but when I test it on the server, it shows always loading only 45% and then goes to the content page. I wonder how to make it so that it can load 100% and then goes to the content page?[code]...
View 6 RepliesI have some MCs with embedded buttons for "home" "about" "contact" etc. they seem to work just fine. i also have a MC clip (main_stage) in the center of my stage into which i'm trying to load jpgs (from an external file called home_back.swf) as backgrounds by clicking on the buttons. this does not work at all and i'm about to drink a gallon of hemlock to end my frustration.[code]...
View 5 Replies