When trying to send a POST request to an ASP.NET asmx web service I am seeing (in Charles and Firebug) it go through as a GET. Here is my AS3
[Code]...
This seems to be an issue with flash as it is happening before it even goes to the server. I have uploaded this to a testing server and I still see it come through as a GET.
I'm trying to reproduce a POST request that was captured from WireShark using PHP. This POST request was sent by a Flash (.swf) object, so it's a little bit complicated in configuring the header.It does not print out anything in the end, so there must be something wrong with PHP code that I could not see.Here is what WireShark captured:
POST /engine/ HTTP/1.1
Host: abcdef.com
User-Agent: Mozilla/5.0 (X11; Linux i686; rv:2.0) Gecko/20100101 Firefox/4.0
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8[code]....
The result is a blank page instead of response from server.
send xml data to the server using HttpService request thr POST in Flex?
View 1 Repliesis it possible for flash widge on site a.com to send POST request to b.com ?If so, couldn't this be quite dangerous ? A user would be performing POST to an unknown host
View 1 RepliesI'm new to Flex and couldn't figure out yet how to send binary data to the server as the body of a POST request. The HTTPService component doesn't seem to support this. The FileReference doesn't seem to support setting the data via the Flex API.
View 4 RepliesI have an issue with an asmx service I am trying to access. No crossdomain file. I read there is a way around this using HTTPService instead of a webservice. Still cannot load the wsdl. See code below.
var dataService:HTTPService = new HTTPService();
dataService.url =
"http://flexmappers.com/proxy.php?url=http://www.server.net/carbon.asmx";[code]....
Im building a reservation form, using actionscript and php. I use sendAndLoad to send variables to php via POST, which returns a different HTTP POST response in case of sucess or not.
Is there anyway to "read" HTTP POST responses with actionscript?
What i want to do is open a new browser window, (preferably a pop-up window) and have it display results based on POST data sent from flash. Like a form that targets _blank or something.
View 1 RepliesI need to pass along an incoming xml post request using as3? Is there a simple way to just pass that request through an as3 application? I don't want to do anything with the request other than send it along to its destination.
View 1 RepliesI'm trying to load a XML via POST-request in Flex:
var request:URLRequest = new URLRequest('res/unhasher.xml');
request.method = URLRequestMethod.POST;
loader = new URLLoader();
loader.load(request);
But in Firebug I see that my file is loaded through GET.
Request header:
GET res/unhasher.xml HTTP/1.1
Host: bla-bla-bla.com
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:10.0.1) Gecko/20100101 Firefox/10.0.1
[code]....
How to make POST requests from Flash/Flex?
I would like to make a simple call to a script passing the data via http POST.In particular I would like to pass two parameters:
1) a file
2) a string containing the name of the file
How can I do that ?
When i crate flash mail list I past the variables via an object
Code:
variables.name = formName;
variables.mail = formMail;
etc.
So I'm trying to code an AIR widget for Tumblr. Before I actually start working on the widget, I wanted to play around with AS3 and the Tumblr API to do simple things, like reading and writing posts, editing posts etc. I got reading posts working, but when it comes to creating posts I run into an unknown brickwall. Here's the instructions from Tumblr's API doc on making a POST request:
The Write API is a very simple HTTP interface. To create a post, send a POST request to [URL] with the following parameters:
Email - Your account's email address.
password - Your account's password.
type - The post type.
These are the valid values for the type parameter, with the associated content parameters that each type supports:
Regular - Requires at least one:
Title
Body (HTML allowed)
[URL]
And here's my AS3 code:
import flash.net.*
gogo.buttonMode = true; // gogo is the instance name of a MC on the stage
gogo.addEventListener(MouseEvent.MOUSE_DOWN, go);
function go(e:MouseEvent):void{
var variables:URLVariables = new URLVariables();
[Code] .....
And for the life of me, no matter how simple I make this code, I cannot get it to work.
I'm basically interacting with a third party API flash file to send HTTP POST requests to my server. know I'm on somewhat the right path because it requires a crossdomain.xml file, and before I added that part nothing in the POST variables was showing up, however since I added that file there are 4 variables that are set, these POST variables are sent by the application to give me basic information about the file.. but I actually need to read the RAW POST data to actually save the image being sent by the Flash.I'm aware there are 3 ways...$GLOBALS['HTTP_RAW_POST_DATA'] $HTTP_RAW_POST_DATA which is probably the same as the firstfile_get_contents('php://input')For whatever reason, neither of these "work". By "work" I mean they're not being set, when I var dump them I get nothing.
Could it be that there's a setting in php.ini that I need to set, or perhaps the Flash application is truly not sending the actual image? I think it's doing the right thing, because it's a semi popular API and it's used by a couple other sites so I'm pretty sure it's right on their end.
I'm trying to optimize a site I'm building with Django/Flash and am having a problem using Django's iterate over chunks() feature. I'm sending an image from Flash to Django using request.POST data rather than through a form (using request.FILES). The problem I foresee is that if there is large user volume, I could potentially kill memory. But it seems that Django only allows iterating over chunks with request.FILES. Is there a way to:
1) wrap my request.POST data into a request.FILES (thus spoofing Django)
or
2) use chunks() with request.POST data
Make a POST request with parameters and an attached file
View 1 RepliesI am sending the parameters from flex application through HTTP POST request to Python/PSP script. I am able to call PSP script from flex app using HTTP POST request, but i am not able to use/retrieve these parameters in Python/PSP
View 1 RepliesI have a problem with the following code:[code]The problem is that the code is working when I test the scene (ctr+alt+enter in flash), but after I publish it it doesn't work... not sending any request nor redirect.What I want to do is to log in a file on the server what the users typed (related with Related with: Flash actionscript - save a text file on server).
View 1 RepliesI see this example here: [URL]
Which looks pretty good. But the loader seems overly complicated. What if I don't need to listen for a response? Can this be simplified?
How can I pass a variable to javascript in actionscript 2?
View 1 Repliesi am sending a flash reqesut to a url when i make request from local computer its working but when i upload on my server its not working i think flash is not sending request from my server to another server
[Code]...
I have a PHP process that does a bunch of stuff and I want to send feedback to the Flash client that calls it, as the request is being processed. However, since I'm listening for the COMPLETED event, I don't get the feedback until the PHP completes execution (at which time all the buffered messages arrive at once).
View 3 RepliesActionScript 3 can send UDP packets via flash.net.DatagramSocket. Is their any way to send an ICMP packet? I'd also like to set the TTL flag so I can implement traceroute in an SWF.
View 1 RepliesIs there any client-side technology to send get request with unencoded query string?I want to send some reserved symbols to server in URL without url encoding (eg. '>' or ']'). (I want to test server's behavior).
An XMLHttpRequest encodes these symbols automatically.
I've got troubles with the sendAndLoad function for a couple of days now. It just doesn't want to send any request. My actionscript looks like this:
ActionScript Code:
test.onPress = function() {
_root.test.testText.text = 'I needed that one!';
var resultObj = false;
[Code].....
These files are all created for testing purpose. There isn't any productive idea behind and the php file is not collecting any post or get data. Just to keep it as simple as possible, trying to understand why it's not working.
I'm already happy if sendAndLoad would finally send one request to this php file as a start
I have a working code that connects to my server using URLRequest. Now I m trying to make the server work with SSL. When I try to change the address in AS3 to https, i get: Error #2032: Stream Error. URL
I've googled it and found out this is a sendbox issue. I have two questions: 1. I m trying this from Flash CS3 studio. Should that ignore the sendbox restrictions? 2. When I will try this from a swf running in a browser, I can I fix this? using crossdomain.xml?
I've searched the web but i'm not getting itThis is my flex code:
private function callWS():void{
var ws:WebService = new WebService();
//changed this
[code].....
I need to send a Multipart XML POST request to a web service using FLEX/Actionscript. I would prefer to send it using FLEX, but Actionscript would work as well.
View 2 RepliesI am creating a google scraper in Adobe AIR using the Flex 4 framework. I have run into a brick wall: Google forces a captcha after around 10 pages are read. Can anyone tell me how to get the page through a proxy server
[Code]...
Example of code which would be used to send a bunch of variables to a PHP script via flashThis would require the PHP script to load when the data is sent.I want to use this for a Flash event calender which triggers more information about the event to appear in a HTML area of the page when an event is clicked on. The PHP file would be the same file that the SWF is embeded in so the FLASH file would reload the page with the variable sent to the PHP. The PHP would use this variable to select the right content from a MySQL database.
View 13 Replies