i have a problem while username and password validation.i retrieved data (username and password)from an xml doc using http service but the problem is that i have to verify the username and password entered by he user with the username and password of the xml doc...
my xml doc is as follows:
<employees>
<employee>[code]....
I want the validator for password text input.
At least one Upper case letter
At least one numeric character
At least one special character such as @, #, $, etc.
should be there in password how can i give it in action script or mxml.
I am just learning AS. I am trying to make a username and password box that will return a welcome message if the two text fields are entered correctly and a "Sorry Charlie" message if they are not.
I am using an If-Else statement. If I have the Else part commented out, I am able to enter text into the two text fields and get a welcome message. With the else statement though, I am not able to finish entering text in the second text field before the "Sorry Charlie" message appears.
[Code]...
I'm using Flash CS4 Professional, and I'm using AS2 because I think it's a lot less complicated than AS3.I've found a few things on the internet that but I'm wondering if someone could just clear this up for me straight away.I have an input text field with instance name "username", and another named "pass". I then have a login button which has the action play();Once username and password have been filled out and the button is pressed, it plays until frame 3. Frame 3 only has the stop(); action in it for now. Here's what I need the rest of the actions to be:I want it to check the username and password against a text file. The text file reads:username=tylerngataki&pass=12345I then want an if/else operation like:
If (condition) {
statement
} else {
[code]....
iam tryin to create a login system .i want the username to b only "mayuresh"& password to b "mayuresh" blow is my code
stop();
go_btn.addEventListener(MouseEvent.CLICK,perform)
function perform (event:MouseEvent):void[code].......
I'm attempting to make a Username and Password input box, with a set username and password that will take you to the next frame, but whenever I test it it just stays in the same frame.
The code I'm using is
on(release, keyPress "<Enter>"){
if (password eq "###") {
if (username eq "###") {
gotoAndPlay(2) ;
[Code]...
but with the ### being what I actually have the username and password set to. As I said before, when I try this, nothing happens. I have the values for both the username and password boxes set to username and password respectively, but I still cannot get it to work. What am I doing wrong?
I installed FMS into a linux server with its own flash media encoder uthentication add-in. I restarted the fms service. The fms is working fine, i can stream and also visualize the stream on a client. When I connect to fms with fme i'm not asked for username and password. How do I set up users in fms so that the access to it should be restricted?
View 6 RepliesI've been trying to load some JSON from a URL with a username/password at the beginning.So the URL resembles: http:/[url]....I've been using the DataLoader class from greensock and it returns a Error #2032: Stream Error if the authentication is up but loads fine when it is disabled.I'm trying to add a 'Authorization' URLRequestHeader to get round this issue? Is this the best way forward?
Edit: I'm trying to use headers in a similar way to this post: Flex 3 - how to support HTTP Authentication URLRequest? but I'm not having much success. The base64 encoder I'm using is from here: http:[url]....
2nd Edit: latest code
_loader = new DataLoader(ENDPOINT, { onComplete:handleComplete, onError:handleError, onFail:handleFail } );
_loader.request.method = URLRequestMethod.POST;
_loader.request.data = new URLVariables("required=RandomData");[code].....
I know how to create a Username and password in flash. I want to know now is how to create a scene where users can register their own name and make their own password.
View 0 RepliesI'm making a simple login application. I want to send a username/password while connecting to FCS, and have the SSAS of main.asc connect to a PHP document that will lookup the username/pass and make the necessary checks for the information in a mySQL database.
I'm trying to use the LoadVars() object, maybe you can't do this with SSAS? Or maybe i need to include some other actionscript file (I know when you use components you have to specify load("components.asc"); at the top of the main.asc file --- i'm hoping it's something that easy )
This is my first FCS app, I've done a lot of research but this one's sort of stumping me. I keep getting an error that looks like this:
/opt/macromedia/fcs/applications/my_app/main.asc: line 9: ReferenceError: LoadVars is not defined
Here is my code for main.asc:
Code:
application.onAppStart = function(){
this.userCount = 0;
this.users = [];
[Code]......
i am try to create a button that contain username and password fields, i have used the following code for the password field:
String.prototype.isWhiteSpace = function() {
return ((this != undefined && this.length>0) ? (this.split(" ").join("").length == 0 ? b=true : b=false) : (b=false));
};
var UserName = "";
[Code]...
My problem is rather simple. I have a site built totally in flash that I need a couple other people to be able to log into, but I don't want them to know the password. Does anyone know if there a way that I can load the flash site in an iframe, and then use some javascript to fill the flash username and password with the correct text so that they can just click the login button without knowing the username and password?
View 1 RepliesI'm trying to post a username and password to a server side script.The client provided an HTML form that demonstrates that the sever side functionality is working, but I keep getting the following:
<response>Invalid UserName / Password Combination</response>
Here's the HTML code:
html> Here's what I have been doing in AS3:
var loader:URLLoader = new URLLoader();
configureListeners(loader);[code]..........
I kind of understand how to create a basic username and password 'menu' in flash.[code]But I would like to create a menu where a user can create a new username with then will be added to an exteral file ( data base I guess).From there on anything the user does is remembered on that name. And if that user exits the program and loads it again the user's stats are loaded.
View 4 RepliesI don't know if this is the right place to ask this or not, but I thought I remembered a way to pass a username and password to FMS via Flash Media Live Encoder? I simply need to pass two values, equivalent to this in AS3[url]...
View 1 Repliesi am have big problems, im designing a login screen and it will require more than one user to be able to access differnt parts of the flash file. at the moment i am using IF statements.
[Code]...
there is no problem with this method but if a user wants to change there username how to change the script. the other thing is the flash file is being converted to a standalone .exe file so it's basically like a program. to get to the point I need to know if there is any way for the Actionscript to be able to read a .txt document so that when the username and password is changed in the .txt document flash will read it so when they enter the new username and password it will still allow them to access the files.
I want to make a file that that has a register button where the user can put in their name, username and password. Then I want the user to be able to be logged in with the username and password they put in.
View 9 RepliesSo i have a register and a log in form with shared objects but iahve a problem. I have two input text fields named: textfield textfield2 The One is for username and the other one is for password. So when you tpye some text in it for saving it as SO i use this code: P.S The button is an MC
[Code]....
so untill this point it works fine but then when you go to log in i want when you press the log in button the text that you wrote for username and password to be checked trough the created shared objects this means mySO and mySO1 and if there is a match the movie to proceed to a designated frame if there is not to go again to a designated frame whare it will be the ACCESS DENIDE text.
Is there a way to automate authentication via adding the username/password in the profile XML of flash media encoder live (3.2)? I'm not referring to the command line parameters, but placing a tag in the xml file that contains the username/password for both the primary and backup server.
View 2 RepliesI'm trying to setup a RegexpValidator that only accepts a string of alphanumeric characters between 6-30 characters long and requires one number. I'm new to Regular Expressions and everything I've tried seems to keep returning an invalid ValidationRsultEvent.[code]
View 2 RepliesI've created a custom textInput componenet that handles it's own validation using a private validator. The validation is enabled depending on the state of the component i.e. validation is enable when the components state is "edit".However, when the state changes from edit the internal validator is set to not enabled but the validation errors on the textbox do not clear - the textInput still has the red border and on mouseover the validation errors come up. What I want to happen is that when a validator is disabled the error formatting and error messages clear from the text input control.
Does anyone have any idea how to do this I tried setting the internal validator instance to enabled = false and dispatching a new focusOutEvent as below but the validation error formatting is still applied to the textInput contrl.
_validatorInstance.enabled = false;
//clear the validation errors if any
dispatchEvent(new FocusEvent(FocusEvent.FOCUS_OUT));
[code].....
I am new in flex and recently read about Validation and Invalidation in components.
View 2 RepliesI'm getting the "Error #1009: Cannot access a property or method of a null object reference." error on my application. Is there a function I can use to detect this before it causes an error... maybe something like:
isValid(variableName);
I know there's one, because i've used it before, but i can't remember what it is right now.
I have a XLSX file which contain 2 columns 1 being a formatted date, time or datetime field and other being the relavant format string of type FLEX. So this file contains Flex date format string with formatted value. This files can be contain more than one thousand such combination records. [code]What i need to know is, is there anyway that i can validate this given date , time or date time values at right side are formmated according to given FLEX format in the left side.
View 2 RepliesIm new at actionscript, and I am making a very project. Basicly, I have some thing were there is a page you can get to by beating other parts of the 'game'. I want to add some sort of a password or save feature to people can type in the password of something at the opening screen and jump to that page.
View 1 RepliesI have a Flex 3 app with a view in a viewstack, and that view must only be created when requested. I have declared validators for each of the controls on the view and I have created a method called checkAllValid() which runs Validator.validateAll(). This works great when I'm actually using the controls (using the change or focusOut events), but how can I get checkAllValid() to run when the view is first displayed to the user, so that they are immediately shown what is invalid once the data is populated in the controls?
I have tried putting the call in various events on the view itself (e.g. creationComplete, updateComplete, show, activate, etc.) but it always shows the following error when I start the application:
'The source attribute must be specified when the property attribute is specified.'
I have also tried setting the creationPolicy on the view to "all" but this does not help.
Some of the validators are only enabled when the form is in a certain state, but I have eliminated that as being the potential problem by commenting out all of my validators except for this most simple one:
[Code]....
I have also tried calling the single validator directly rather than using validateAll and the result is the same.
There must be a way I can force the view to validate when it is shown....
(by the way it's in the Cairngorm MVC framework and I have data bound to the controls)
How to remove validation programmatically from flex componentThis is my method
public static function validateRequired(txt:TextInput, errorMessage:String="This field is required"):Boolean
{
[code]....
I might be taking crazy pills but has anyone actually gotten the errorSkin feature to work? I am not doing anything crazy, just extending TextInput (spark) and setting the errorSkin property.I have tried creating a skin using SparkSkin, did nothing.I have tried creating a skin using ProgrammaticSkin, did nothing.TextInput is always a red border. I know you can set errorColor and errorString but I am obviously looking to do more than just change the color of the border. I am compiling using Flex 4.1.
Implimentation:
<components:PromptedTextInput id="txt"
width="200"
[code].....
is it possible to check if there is any item in a list?
View 3 RepliesI'd like to use tooltips with the same design as the error/validation tooltips (rounded box with a tip pointing to the mouse's position).Given the name "error/validation tooltips", it bothers me to use them as normal tooltips.I haven't found people having the same "principles" issue as myself..So, is it that bad to use the error/validation tooltips as normal tooltips? And, if yes, what would be the easiest way to re-use its design without rewriting much code?
View 2 Replies