ActionScript 1/2 :: Looping A Streaming Mp3
Nov 5, 2009
I'm streaming an mp3 that plays while my movie plays. I did this through an empty movie clip with an instance name soundLoader. Then on an actions layer I put the following:holidayTune = new Sound(soundLoader);holidayTune.loadSound("Jacks_Stomp.mp3",true);This works great, but I need it to loop. It's ending before my movie does and since the length of the movie really depends on the user's participation and how long they take to make selections (it's an interactive piece), I need it to keep playing.
View 2 Replies
Similar Posts:
Jul 13, 2009
I am streaming an FLV as an intro video for a website. This intro video contains two HTML buttons (login + enter) overlayed using a transparent DIV. The client has specifically asked for the video to loop if the user clicks on "login" as they will need additional time to enter their details. However, if the user doesn't click on anything then they want the site to automatically carry on to the homepage. My question is: How do I get the HTML to communicate these conditions to my FLV player that is streaming the intro video? This is AS3.0.
View 19 Replies
Dec 14, 2010
As of Flash 10.1, they have added the ability to add bytes into the NetStream object via the appendBytes method URL...The main reason for this addition is that Adobe is finally supporting HTTP streaming of video. This is great, but it seems that you need to use the Adobe Media Streaming Server (URL...) to create the correct video chunks from your existing video to allow for smooth streaming.I have tried to do a hacked version of HTTP streaming in the past where I swap out the NetStream objects (URL...), but there is always a momentary pause between the chunks. With the new appendBytes, I tried to do a quick mock up with the two sections of video from the preceding site, but even then, the skip still remains.Does anyone know how the two consecutive .FLV files needs to be formated in order for the appendBytes method on the NetStream object to create a nice smooth video without a noticeable skip between the segments?
View 6 Replies
Jul 2, 2009
We are streaming a one hour F4V from streaming media server 3.5.2 and for some reason it is seeing our one hour video as being 10 hours long. We have tons of other videos and never ran into this problem in any of the other files. This is the only file that exceeds one hour. This occurs in the default player from the streaming server.
View 1 Replies
Feb 2, 2010
The issue I am running across is this: I encoded and embedded a movie clip to act as the background. There are other animations that can and will loop, as the movie resets itself. But there are some elements that I only want to run once and not repeat once the embedded movie loops (link introductions, where objects fly in and transition into the button). How can I set the one time animations to fire just once, while keeping the embedded animation on a loop?
View 1 Replies
Feb 2, 2010
I am fairly new to Flash and I am constructing a website. The issue I am running across is this: I encoded and embedded a movie clip to act as the background. There are other animations that can and will loop, as the movie resets itself. But there are some elements that I only want to run once and not repeat once the embedded movie loops (link introductions, where objects fly in and transition into the button). How can I set the one time animations to fire just once, while keeping the embedded animation on a loop?
View 1 Replies
Jan 8, 2009
Is it possible to stream mp3 files from mms url's like this? [URL]
It throws an error when i try the way i use to load mp3 files (it works with other mp3s):
var sndObject:Sound= new Sound();
var reqObject:URLRequest=new URLRequest("mms://example.streamsvr.com/example.mp3");
sndObject.load(reqObject);
[Code]....
View 1 Replies
Feb 24, 2010
I have a virtual directory (Storage Area Network) in 'C' drive as well as in "webroot" folder in Flash Streaming Server. What do I need to do to make RTMP videos work from SAN directory on Flash Streaming Server. It works fine for http. RTMP from vod -> application folder works fine. I have done a lot of research and found out that we can use virtual directories for streaming videos. I am unable to find steps on how to use it..
View 4 Replies
Sep 29, 2009
We (the university I work for) want to add an IP camera to the top of a building (so it has to be IP, we can't put a machine up there, so USB is out of the question) to stream a live view of the quad. The problem is, I can't find a way to stream any IP Cameras through the flash live encoder. I tried a camera by Axis, but their capture driver only supported MJPEG which the live encoder does not.
View 3 Replies
Jan 4, 2007
I have imported an FLV into my SWF. Now how do I get the video to loop?
View 5 Replies
Apr 15, 2009
I'm a newbie at Flash...and have a main movie that I would like to load external movies into..for ease of modification of the different areas vice having one large swf.I'm using the loadMovieNum command to load the external swf's just fine. When I play the external swf's by themselves...they play once and stop. When they are loaded into the main movie...they loop.I've placed a "stop();" command at both the frame in the main movie...and also on the line directly after the loadMovideNum line.
View 3 Replies
Oct 19, 2009
I have many movieclips on stage, let's say 100.Rather than setting onRelease or OnPress function for each one, is there any way of looping through all the movie clips (maybe if they were called MC1 MC2 MC3 MC4 etc etc), using an array, to see which one was pressed and then say what should happen if so and so MC was pressed.
Depending on which MC is pressed a variable will be a different number... e.g. MC1 pressed means variableA = 1, MC1 pressed means variableA = 2, MC1 pressed means variableA = 3 etc
I just thought there would be a more intelligent solution than writing out this 100's of times: MC[numberOfMC].onPress = function() { do something };
View 5 Replies
Oct 26, 2009
I made a basic slideshow it's not interactive it just loops, each time it loops the preloader loops with it so you see it each time. How would I get rid of that preloader looping?
View 1 Replies
Dec 4, 2009
I am adding an 6 minute audio to a flash website and want it to loop. It is a 6,000 kb size file .mp3 audio stream and audio event are set the same at, bit rate of 16kbps mono and a 60 second play time, however it loops after abt 17 seconds. I have set the sync to stream and loop. Code is simply Play(); The timeline is set to 405 frames at 24 fps. I have tested the original and it is fine and plays well when not in flash.
View 11 Replies
Oct 30, 2009
I have four flv videos (video1.flv, video2.flv,video3.flv and video4.flv) and I want to play them one after the other.When video4.flv is finished I need the movie to start playing video1.flv again and the rest after it, an endless loop.I'm using CS3 ,AS2 and Flash Player 9
View 0 Replies
May 27, 2005
I've mc contain some animation which is all workin via actionscript. What I want to do is once the animation is complete.......i want a delay of about 10 secs & then I want it to start all over again, so its just a looping animation.
View 9 Replies
May 20, 2009
I have a sliding menu with buttons - each button calls an external swf - which plays in an empty movie clip.Now, I want the current loaded swf to loop till the time the user clicks on another button. The problem is, I do not have the fla files for any of the external swfs (these are screencam recordings using a software that does not publish .fla) - so I can't put a code at the end of each external swf asking it to not stop.
View 5 Replies
Feb 10, 2010
I am fairly new to AC and have some questions about a project. I am creating a gallery with images tweening from one to the other. I have the animation working but it will not loop as expected.
1) The images are loaded dynamically via the below code.
2) The main stage uses stop(); and all mc's except the gallery mc will loop as expected.[code]...
View 1 Replies
Mar 5, 2008
I have (what should be) a really simple little piece of code inside a moviclip, trying to get it to fade in and out in a loop. Here's the code (within the movieclip):
Code:
import gs.TweenMax;
this._alpha = 100;
[code]....
View 3 Replies
Feb 19, 2009
How do I tell my extrnal .flv, which I am calling with the FLVplayback component, to go back to the beginning and play again when it gets to the end?
View 2 Replies
Apr 24, 2009
I am used to working in Flash MX but now have CS4. You use to be able to just drop an mp3 file onto a layer and it would loop continously now it's not doing that.I need help in a big way to loop this mp3 file in CS4.
View 3 Replies
Jun 9, 2009
I have created a looping movie clip which I want playing in the background of my main movie which has multiple scenes. Obviously I cant drop it on the timeline in each scene as then when it skips scenes the movie reloads and there is a jerk on the screen. Is there a piece of actionscript that I can point to my SWF and just have it looping throughout the whole movie?
View 2 Replies
Jul 22, 2009
Im having trouble getting my head around writing script for looping certain layers of a fla file.I have a project that I urgently need to finish and can't figure out how to achieve what I need.I have an fla file that has several animated layers.I want layer 1 to play once and stop while continuing to be visible (which I have achieved).I then need to play layer 2, layer 3 and layer 4, and loop these layers continuosly without relooping layer 1.
View 2 Replies
Jul 1, 2010
I'm trying to loop a Flash Banner ad. I added the code to the first and last frames on a separate action layer on the main timeline, but it's not working.
I'm using actionscript 2.0/CS4.
I have a stop action on the last frame of the last text movieclip that plays. And it seems to get hung up here. When I remove the stop action it just loops that movieclip and not the whole animation.
This is the code I'm using in the first frame of the main timeline.
> var counter:Number = 0
And this is the code I'm using in the last frame of the main timeline:
> // if its being used on the last frame use a stop(); action on the top line
> if (counter < 3) {
>counter++
> gotoAndPlay(1)
> }
View 1 Replies
Oct 20, 2010
loading swf from xml and button click is done, only looping the swf animation is missing, if someone can help in loop the code check below code.[code]
View 3 Replies
May 20, 2009
What I have is a sliding menu with buttons - each button calls an external swf - which plays in an empty movie clip. Now, I want the current loaded swf to loop till the time the user clicks on another button. The problem is, I do not have the fla files for any of the external swfs (these are screencam recordings using a software that does not publish .fla) - so I can't put a code at the end of each external swf asking it to not stop.
View 5 Replies
Jun 5, 2009
I'm brand new to flash so cut me a little slack. I'm in the middle of building a website in Flash CS4 in Action Script 3.0 and (according my the tutorial I'm using) I need to access the "parameters" panel. The problem is I don't see it anywhere. I see "properties" and "filters" but to parameters. I've cycled through all the workspace presets but with no luck. How can I bring it up?? Also, even though I used the "stop();" code in the beginning of my actions frame my movie just keeps looping when I test it.
View 1 Replies
Jun 17, 2009
this a sample code that im currently using...but i need to find a way to do this long script, as short as possible..
btn1.addEventListener(MouseEvent.CLICK, goto1)
btn2.addEventListener(MouseEvent.CLICK, goto2)
btn3.addEventListener(MouseEvent.CLICK, goto3)
[code].....
View 6 Replies
Jun 20, 2009
I have created a submit button and the text goes up when the mouse is over the button, but when I go to test the movie it seems to be on a loop and I can't see away to stop the text from looping. I found loop on the control panel but when I remove the tick there is no change and the movie continues to loop. There is no action scripts applied to the button yet.I am at the moment trying to get my head around action scripts so I am a complete beginner at this.
View 1 Replies
Jul 2, 2009
I created a small Flash movie that I want to end at the last frame. Instead it keeps looping and starting from the beginning. This is the link: [URL] At the end of each timeline I inserted a keyframe and added the action: stop(); But this doesn't seem to have any effect.
View 1 Replies
