I'm making a skateboarding game(flash 7.2 actionscript 2.0) and im having A LOT of trouble going to frame 2 when my skateboarder touches the circle. Look at the problem here[url]...
View 1 RepliesOn most of my option MC's I have something like:
this.onRollOver = function(){
this.gotoAndPlay("onanim")
}
this.onRollOut = function(){
this.gotoAndPlay("offanim")
}
Obviousy if you quickly roll on and then off the MC the animation is staggergy and not a fluid animation.I would like to set it so that everytime you touch/roll on the option MC it will always play its full on animation right, then it will go to the off animation.
I'm developing a game atm, and I need some help on the mathematics/coding of colliding circles (and their change in x/y speed). What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision
If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled. Does anyone here have any insight, links or tips on how I can du this?
i want to make one circle follow the mouse cursor, inside another circle. Similar to an eye looking at the cursor. Ive attached an example.
View 4 RepliesI have text in a dynamic field showing up as circle. I want to say if circle shows up change it to cercle (french).
[Code]...
What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision.If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled.
View 6 RepliesI`m working on a app that you can draw lines.....like circles, rectangles... my problem is when a user draw a circle for example....i wanna be able to paint (change color) inside of this circle. I`ve tried working on Shapes with cacheAsBitmap = true and Bitmaps with BitmapData but it doesn`t seens to work.
View 4 RepliesI want to create circle, and put 8 points on it. So, user can drag each point in order to change it's shape.
Is there any way to do this in flash?
I have some following code:
Ref. - How to draw a continuous curved line from 3 given points at a time
package{import flash.display.Sprite;
import flash.events.MouseEvent;
import flash.geom.Point;
[Code].....
So, can anyone convert these three point curve line to 8 points circle?
I have to draw a circle using action script. The Circle Diameter has to be controlled by a button.
View 0 RepliesTrying to do circle circle collisions via math which I'm really having trouble with. One circle (player) just moves from keyboard. The ball reacts to the player. All the code shown is in my players class and I passed in a reference to the ball.
On my enterframe I have:
Code:
var xmov1 = xSpeed;
var ymov1 = ySpeed;
var xmov2 = ballRef.xSpeed;
var ymov2 = ballRef.ySpeed;
[code]....
Perhaps I'll go with a box2d equivalent instead of trying out my own physics shenanigans.
Here I what i need is : Start drawing first circle and when first circle is on half way, Start second circle.same way second and third circles. and after completing 3 circles, just gotoAndPlay 2nd Frame .
View 3 RepliesI have a simple three ring animation where the three rings fade in and out.On the stage the rings are a perfect circle, in the publish preview they look fine, but once I publish the SWF, all of the sudden the rings are not perfectly round anymore.
They are almost perfect but right at the top and bottom there is just a small portion which has sort of "flattened out"...
I bought a Flash video tutorial online for Animating and the FIRST step is to create a circle with the circle tool, and the guy does it online, and it fills itself in. I repeat his actions exactly and I cannot get the same result at all. I just get a circle.
View 5 RepliesI have two MC's, circular in shape. One of the circles is stationary and you can drag the other. I'm trying to get the moveable circle to be able to move around the circumference of the stationary circle, but not overlap. I'm able to detect when they overlap, not using hittest. I just can't figure out how to code it so that the draggable circle can't be moved over the stationary circle.
View 4 RepliesDoes anyone know of any tutorial or code example that deals with resolving circle-circle collisions including rotation?
View 2 RepliesI have been trying to get this right for hours now it cant be as hard as I am finding it! but basically I have a circle and in that circle is a circle and all I want is for the inner circle to not be able to leave its parent. that's it but I just cant get it to work.
View 1 RepliesIs there a way to return the name of a movieclip which is being touched by the currently selected movieclip?I've got a variable called currentBall which is tracking a ball when placed inside a target zone (e.g. zone0_mc).How do I return the name of the target zone?
View 3 RepliesI'd like to make a circle slide ( Slider that on the shape of circle instead of vertical and horizontal Slider) like this one:
[URL]
Is there a ready Component on the web.
i am loading an external .txt file and am displaying. its working fine. but when am trying to split the specified values, the value was disappearing. i mean except that splitted value everything is displaying... how to get that.
var loadXML:XML = new XML();
var myarr:String;
loadXML.ignoreWhite = true;[cocde].....
its an xml string based. now i want to store the picture thumb value in one array value, and description value in another..... like tat..
What I need is to build a page with a list of 5 links each stating a time. These links will be used to determine bands timeslots which is the fairest way I can possibly think of...kinda like drawing times out of a hat except over the web. I want to send this list of 5 different timeslots to a band, have them click a link and see their timeslot...(ex; 9:00pm - 9:45pm) and in the meantime...all the other links become inactive and disappear. This can be done 1 at a time so I can rebuild the list without the previously chosen time slot being an option...or it can be the first person who reads and choses gets the slot and the next person to view the page would see the page without the previous selection even shown. I would also like the selection to be emailed to my email address.
_____Here's how I would like it to look..._____
In order to be fair about timeslots, choose from one of the links below. The link you choose will contain your timeslot in which cannot be changed and you will not be able to choose another link after you have chosen. These links are random...no particular order and nobody knows what timeslot is in what link. Your selection will be emailed to me.
Choose your timeslot A
Choose your timeslot B
Choose your timeslot C
Choose your timeslot D
Choose your timeslot E
I created our website using Actionscript 2.0 and on several of our pages there is a drop-down text box that has a "close" button on it, which is just a movieclip located inside the text box movieclip. For some reason, if you stay on a page for a few minutes the close button disappears. The hand still shows up when you hover over where it was at and you can still click on it, but it just turns invisible. I'm not sure what's causing this.
[URL]
All symbols have stopped rendering while in the IDE. They publish fine, but I can't see them on stage.
Details: Flash Pro CS4 10.0.2 Mac OS X 10.5.8 on MacBook Pro w/ 4GB RAM.Objects that are not symbols render fine (shapes, groups, text, components).Symbols are selectable and show the blue selection boundary.Symbol selection is constrained to the shape of the symbol, not the bounds.The 'empty clip' handle is shown for each symbol(and effects / filters are rendered on it).The layers are not hidden, and switching to outine doesn't change the appearance.All files opened on this Mac show this behavior(IDE pref setting for don't display symbols?) .Files openfine on other machines (PC & Mac).I trashed the 'Flash CS4 Preferences' file, but it didn't fix it.Here's the IDE view of the stage:
I'm having trouble loading a SWF that contains a FLV movie into another SWF.
Here on its own is the SWF that I want to load:
[URL]
You'll see that the movie and the controls appear and work properly.
Here is the SWF in to which I want to load it:
[URL]
If you click the white rectangle at the bottom, it will load comback.swf into Level 1 but the FLV and the controls are missing. (Somtimes the FLV appears w/o the controls.)
figure out why the SeekBarHandle disappears when my videos start to play?
View 2 RepliesI'm making a game, the cursor is replaced. However, when you fail and click try again, the cursor dissappears.
View 0 RepliesI found a script to make the animation follow the mouse movement and it needed to stay in fixed boundaries. I have 3 different mc 1 behind the other and moving at a different pace to give a illusion of perspective. But here are my issues;1-It works but when I open a new window in the browser the mc(s) are disappearing. 2-And I would really need to ease or smooth the animation a little. I would like the mc(s) to continue to move and stop slowly after I already stopped moving the mouse. how to script both or even 1 of these ? Here's the code I am using now;
function loopX(e:Event):void
{
var xDist:Number = mouseX - 24000
[code].....
I usually work with after effects, and i made this animation using it.Now I'm trying to import this short clip into a website by Wix websites..I exported the movie in FLV from after effects.I Need to put the movie on the homepage of the website, make it play once and then disappear entirely so that you can see the website hiding behind it. Now it cant be anything but SWF. No HTML or anything .any way to do it?
View 3 RepliesI'm customising a tutorial from "Flash 3d" book. Basically its a horizontal/panorama scroller but I don't want to have a custom cursor like they suggest so I have deleted all the bits of actionscript relevant to the cursor.But for some reason when I test the movie the cursor keeps disappearing at randomly on and off when scrolling.Please, can anyone see anything in the code that could make the cursor disappear ? I've checked there isn't any more actionscript in the hidden elsewhere in the file.
// initialize variables
var moveAmount:Number = 15; // how fast the pano will move
var centerX:Number = Stage.width/2; // horiz. center of Stage
[code]........
I made a 3d box using flash cs4 (ive made one using imported images as the sides and another one using vector siding made in flash) Both times, when ive finished the box and rotate it, sides will dissapear then reappear, depending on where the box was in its rotation. For instance, when you look at it dead on, the front side seems opaque, but when i start rotating it, the fron side, at certain angles, becomes transparent and you can actually see INSIDE the box thru the wall, then as it moves it becomes solid again. I am trying to make a presentation for work of a package, rotating 360 degrees on its y axis, but keep getting these odd disapearing sides.
View 1 RepliesI am having a problem with a swf completly disappearing when using wmode at all. When wmode parameter is removed, the swf appears fine. The bug only occurs in FF on a PC (and only some of the time at that ). When theres only a limited amount of html code in the surrounding page (even with wmode ), the swf is visible, however at a certain point, ANY extra line of code causes it to break.
View 11 Replies