ActionScript 2.0 :: Drawing Lines In Movie Clip And Coordinates?
Apr 20, 2004
I am drawing a set of connected lines in a MC that is created using createEmptyMovieClip. The lines start at (0,0) within the MC and move into the negative x values when the lines move left. The problem I am having is when repositioning the MC. When I tell the MC to move to _x=0 and _y=0, it doesn't move to the stage's (0,0), it still hangs off the left side of the stage. The following image shows the MC positioned to (0,0) (note: the green is the stage):shouldn't the MC containing the drawn lines use its left-most point when being repositioned so that it doesn't hang off the left side of the stage?
View 5 Replies
Similar Posts:
Oct 8, 2003
I am trying to have a line draw in my movie with actionScript...have made three lines....if I want line 1 to draw.... then..... line 2.... then line 3 do I put the script on three separate frames ?and.... right now... they are just there...how do I make it like an animation... where the line starts at the edge of my movie.... draws line 2... changes direction... draws line 2.... changes direction.... draws line 3.... then stops.
View 11 Replies
Oct 23, 2010
it seems simple enough but i have no idea on how i could get a movie clip to slowly move to the coordinates of another existing movie clip
View 5 Replies
Mar 26, 2006
Q1) The registration point of a created clip is top left - my question is how can I dynamically change it's registration point - say to center center?
(I am trying to attach a movie clip to a created clip and I wanted it to be centered inside the container - a related sub-question, how can I find the x-y coordinates of the attached movie clip within the created movie clip?)
Q2)When I tried to create two different movie clips, I found I had to create them at different depths, else the first would load and the second would not. Why would that be so? I'm on MX 2004 Pro.
View 4 Replies
Nov 15, 2009
My code is on the main timeline.I call a function loop to draw lines between them.The lines are drawing between the right x, y values BUT between those values on the main stage, not those values within the kite.For example, dot1_mc is at x100, y0 inside kite. the line that should go from its center, draws from stage x100, 0.How do I draw the lines inside kite so that they draw between the dots?Heres my code that draws the linesPHP Code:
function loop():void{ lineDrawing.graphics.clear(); var a:Point = new Point(kite_mc.dot1_mc.x, kite_mc.dot1_mc.y); var b:Point = new Point(kite_mc.dot2_mc.x, kite_mc.dot2_mc.y); var c:Point = new
[code].....
View 4 Replies
Apr 4, 2012
i've got 4 coodinates an need to fit a fit movie clip to them, so each corner of the movieclips is on one coordinate.The only thing i could find it tranforming it with a matrix and angles (see example), but these cant be the best solution for my problem to calculate all the angles etc.
var degX:Number = 0;
var degY:Number = 0.3;
//Get the transform matrix for the object to skew
var m:Matrix = bild.transform.matrix;
[code]....
View 1 Replies
Nov 28, 2009
what i am trying to do is create a game that works on the same bases as battle ships but the difference is that its just at a single grid size scale so basically you only have to hit 5 squares in the 8x8 square grid. The trouble i am having is that i have set it up as a movieclip and i cant seem to get it to same the positions on the side that i select on (named the players side) it works fine for the otherside and will hit the 'enemy squares' and you can win the game but never loose the game that the problem.
View 0 Replies
Jan 2, 2010
Basically its an onPress event handler on a movie clip that attaches another movie to it when pressed.The problem is, I only want the movie clip to be attached once in the designated x,y coordinates, no matter how many times the main object is pressed. I'm essentially trying to write my own FreeTransform script, that allows users to resize the object.
Below is the my source code:
ActionScript Code:
chair_mc.onPress = function() {
var bounds:Object = chair_mc.getBounds(this);
//
[code]...
View 5 Replies
Sep 16, 2010
I'm making a game where an airplane loads using attachMovie, with a randomly assigned y coordinate and a constant x. The airplane then moves across the screen. You hit another button, and a parachutist is loaded using attachMovie, with the coordinates being set equal to the current coordinates of the airplane. The parachutist loads but he doesn't load to the coordinates of the airplane. If I feed the parachutist numerical coordinates, he loads to those coordinates, but for some reason Flash seems to be completely ignoring my attempts to feed the plane's coordinates to the parachutist. Here's the relevant code, which is of course nested in an onEnterFrame function:
if (Key.isDown(Key.DELETEKEY)){
if (jumped == false){
attachMovie("jumperWhole", "jumper", 0);
[Code].....
As I've said, the jumper loads, he just loads in the upper corner of the game, as if the plane's coordinates are ignored and Flash attaches jumper to the default coordinates of the program. If I try to attach the jumper to the using the coordinates of something that's not in motion, it works, so I'm wondering if this has something to do with the motion of the plane.
View 1 Replies
Apr 1, 2011
Is there a method to determine the stage coordinates of a movie clip?
I don't mean something like this:
stageX = mc.x + mc.parent.x + mc.parent.parent.x + ....
I would like to be able to determine the movie clip stage coordinates without knowing what are its parents and grandparents etc. The goal is to be able to place the movie clip on exact place on a stage, no matter what is the nesting structure.
View 1 Replies
Sep 22, 2009
I was thinking that it will be an easy task but something is not right. Here is what I am trying to do. I want to be able to run a function if the mouse is moved over certain areas of the movie clip on stage. Based on which area of the movie clip the mouse is moved I'd like to be able to trigger different behaviour. Below is the code which I was thinking shoud do it:
Code:
var posY:Number;
var mouseListener:Object = new Object();
mouseListener.onMouseMove = function() {
[Code].....
For some reason, the trace statement is ran always when the mouse moves regardless if it is over the movie clip or not. It also only shows the first trace statement. It is never chaged even if the mouse is in the different areas of the movie clip.
View 5 Replies
Sep 23, 2009
I was thinking that it will be an easy task but something is not right. Here is what I am trying to do. I want to be able to run a function if the mouse is moved over certain areas of the movie clip on stage. Based on which area of the movie clip the mouse is moved I'd like to be able to trigger different behaviour. Below is the code which I was thinking shoud do it:
ActionScript Code:
var posY:Number;
var mouseListener:Object = new Object();
[code]......
View 0 Replies
Aug 15, 2009
I've tried hitTestPoint(x,y,true) but then I realized that it works fine only with vector graphics (for my .png image the resault was tha same as hitTestPoint(x,y,false) - so it was unacceptable). Then I tried hitTest function from a BitmapData class like this:[code]is it possible to get a graphic from a movie clip without drawing it (it is not necessary for me to check colission)?Then, having this bitmap (transparent png file) i tried to use hitTest function:[code]
View 1 Replies
Oct 2, 2009
If i have a set of xyz coordinates,
[Code]...
how do i draw them to screen seeing as they will not be straight lines?
View 2 Replies
Jan 14, 2009
The following works just fine:
[Code].....
But, What I want is for part of the logo's image to be cut off, while still drawing without squishing. Basically, (from what I've read) I want to crop it's pixel bounds. But, the following doesn't work:
[Code]....
View 0 Replies
Oct 20, 2004
I have a movie clip that has an image on it.
I want to dynically open this movie clip and move it to a specific location (x,y) on the main timeline on top of everything else.
Then I want to draw lines on that new movie clip that display on top of the image on that movie clip.
how to draw the lines, (well at least I think I do)
Code:
_root.audiogram.lineStyle(2, 0xFF0000, 100);
_root.audiogram.moveTo(0, 0);
_root.audiogram.lineTo(200, 150);
_root.audiogram.lineTo(100, 50);
I also need to be able to clear the lines that are drawn.
View 1 Replies
Nov 16, 2006
I have a movieclip that contains code for an API drawing shape. I can use it to mask a movieclip containing an image but not a moviclip that contains a dynamic gradient.
Code:
// CREATE MASK SHAPE WITH DRAWING API
// create empty movieclip
[code].....
View 3 Replies
Oct 20, 2004
I want to dynically open this movie clip and move it to a specific location (x,y) on the main timeline on top of everything else.Then I want to draw lines on that new movie clip that display on top of the image on that movie clip.I have an idea on how to draw the lines, (well at least I think I do)
Code:
_root.audiogram.lineStyle(2, 0xFF0000, 100);
_root.audiogram.moveTo(0, 0);
[code]......
View 1 Replies
Jan 24, 2011
I have one left panel in which there are different shapes like start,end connectors..... when i drag line image inside canvas i want to draw line/connector between two shapes how would i do it
View 1 Replies
Jan 23, 2004
I am making a movie clip and want to draw lines from one movie clip to another to make it look like connectors on a flowchart. How do I use the returned values using a getbounds() method to draw a line from movie clip A to movie clip B. how the xMin, xMax, yMin and yMax values translate to finding the 4 corners of a rectangular movieclip. Can I use these values to draw lines from the movieclip using lineto().
View 11 Replies
Apr 17, 2009
I'm trying to design an application where you can draw lines. This is my code.
Code:
onMouseDown = function (){
original_x = _root._xmouse
original_y = _root._ymouse
[Code].....
value_obtained is true when you click the mouse, and is made false when the mouse is released. original_x and original_y are the coordinates for the point of the first click.
How can I make it so that each created line stays on the screen and is not remade?
View 1 Replies
Jan 23, 2004
I am making a movie clip and want to draw lines from one movie clip to another to make it look like connectors on a flowchart. How do I use the returned values using a getbounds() method to draw a line from movie clip A to movie clip B. Can some one show an illustration explaining how the xMin, xMax, yMin and yMax values translate to finding the 4 corners of a rectangular movieclip. Can I use these values to draw lines from the movieclip using lineto(). If so how do I do that?
View 11 Replies
Oct 25, 2002
I wanna draw lines, without using the mousse at all. Straight lines or Sinusoids, it doesn't really matter. I've found a relevant tutorial here: [URL] but I didn't manage to make it work. Basically didn't fully understand it.
View 3 Replies
Jul 13, 2010
I've written a class that iterates through all the frames of a movie clip and draws each one to a different bitmap. When I'm done, I should be able to iterate through the bitmaps and play them like a flipbook animation.If I draw all the clips to the same size bitmapdata, then everything looks great. But this is wasteful because now a lot of the bitmapdata's are bigger than they need to be (takes up more memory), and also causes problems because the hit tests don't look right.
So next I try to crop all the bitmapdata to be the smallest possible sizes. However, when I do this, there are subtle differences in the way the images look - the edges might look slightly darker in one frame than in another. When I line up all the images and play them back to back, it no longer looks the same way it originally did.I have no idea why the images look different, and have no idea how to work around this problem, I have tried many different approaches. I have tried using BitmapData.draw(), BitmapData:copyPixels(), and manually using BitmapData:SetPixel(), and all end up with the same result
View 5 Replies
Jun 24, 2005
I have 2 balls, which i connect with a drawn line using the following code.
[Code]....
This code works great except the line I draw has the wrong x coordinates....The line is drawn to the correst y value but the X is at least 300px off? Does it have to do with my anchor point or reg point?
View 1 Replies
Jan 27, 2009
I've created a drawing program that exports the SVG coordinates to a .txt and php loads the coordinates back in to flash. But is there a way to use the coordinates and have the drawing on the board?
Is there another way to do this instead of using the SVG coordinates?
View 2 Replies
Feb 9, 2010
drawing a straight line, just like on the flash game Line rider. I need to be able to create a line by dragging it with the mouse.
View 3 Replies
Sep 16, 2011
I have 4 coordinates from which i created a rectangle(using lines). I also created buttons dynamically. It works great for straight line. But when the coordinates generate diagonal lines im having a problem in making it go below the lines or fitting it inside the figure.See my pic for better understanding. I have also figured out how to rotate the button. Here is my screenshot:Here is my code: To generate the lines:
Code:
var myLine:Shape = new Shape;
myLine.graphics.lineStyle(1, 0xFF0000, 1);
[code].....
View 1 Replies
Sep 23, 2011
I have a set of small circles(balls) on the stage, contained in an array. The array at different times in times in the program could have ballArray.length=1 or ballArray.length=125 or 48 or 0, etc.The balls float around the stage randomly too.I wish to have a function which will draw a line between all the points(balls or circles) in that array.So for example where there is 0 or 1 balls, there would be 0 lines drawn.Where there is 4 balls there would be 6 interconnections. as there would be six lines linking every object to each other object , exactly once per tick in the animation.[code]
View 3 Replies
Oct 21, 2004
I have an empty MC. I want to draw lines that show on top of an image, but everything I try draws the lines below my image.This code is ran from the main timeline.This is my code so far.
Code:
_root.attachMovie("Audiogram_Chart","Show_Audiogram",100000); //this is my MC that will hold the graphics
_root.Show_Audiogram.attachMovie("Audiogram_Chart_Pic","Audiogram_Chart_Pic1",0); //this is a graphic with linkage
_root.Show_Audiogram._x=200;
_root.Show_Audiogram._y=200;
[code].....
View 1 Replies
