I have a movie where a variable named daysleft will be loaded from an external text file into a dynamic text box, this bit works fine. But I then need the movieclip "numbers" to gotoAndStop to the frame number imported via the variable daysleft. Although daysleft displays on the screen a trace(daysleft); says the variable is undefined.
View 4 RepliesI want to use a dynamic text field to display the numbers, but have a few buttons that go with them.I want to be able to press the button, and a set time is generated in the dynamic txt field, i.e. 10 minutes, 15 minutes & 30 minutes. the user will press 30 minutes, then start, then the countdown will commence, and same for the other time increments.
View 1 RepliesI've been asked to make a flash countdown timer. I want to use a dynamic text field to display the numbers, but have a few buttons that go with them. I want to be able to press the button, and a set time is generated in the dynamic txt field, i.e. 10 minutes, 15 minutes & 30 minutes. The idea is that the user will press 30 minutes, then start, then the countdown will commence, and same for the other time increments.
View 3 Replieshow to do this and not found much, so here goes:
I want to generate a variable number of random numbers less than 16 with no duplicate numbers
Ive posted the fla, and what i'm doing is generating a random number and putting it into an array then using a for loop to cycle through the array for each new random number to check if its already there. if it is, then i want to regenerate that number.
if you test the fla you'll see that all i get in my array is some lovely zero's and i sort of know why this is, but don't know how to stop it.
I'm trying to pass text from an input text in frame 1 to a dynamic text field in frame 10. Thus when the user enters text and clicks the submit button it takes them to frame 10 and shows them what they typed. It's not working but I'm not getting any errors. Here's the link:
[Code]...
How would I code this so that when entering a number 1-10 in the text field the MC on the stage will go to that frame? Ie if I enter a 9 the MC playhead will gotoandstop on frame 9. I have attached a .zip file to illustrate
View 0 RepliesI am creating a dynamic text field and "next" button. When the movie is played, the number "1" will be displayed on dynamic text field. When the "next" button is pressed, the dynamic text field will display 2 and so on...
It is like 1...2...3...4...5...
I'm writing a scrolling shooter game and have a dynamic text field that holds the game score. Running inside an ENTER_FRAME event listener, it updates every frame. By tracing the variable "score" I get the correct numbers showing up in the output tab, but on screen, I only see the number 2. It doesn't matter what position in the number it is (ie: 20, or 10372, or 521), only that digit will show up. If there is no number 2 in the score, the field only shows the word "Score: "
The variable is declared as such:
var score:int = 0;
The text field is called scoreCard and is set to "Classic Text" and Dynamic Text" and it is 638 pixles wide (almost the entire width of the stage).
Here is the code for updating the scoreCard:
scoreCard.text = 'Score: ' + score;
trace(score);
The trace was simply put in to see if the score was being tallied up correctly, which it is.
I have also tried eliminating 'Score: ' and simply used:
scoreCard.text = score.toString();
and gotten the same results.
On my stage I have a dynamic text field (instance name = lives).
In my actionscript I have created a number variable called livesnum. And then beneath that I'm setting the textfields value to be the livesnum variable but I get the following error:
1067: Implicit coercion of a value of type Number to an unrelated type String.
My actionscript is as follows :
var livesnum:Number = 4; //Amount of lives
lives.text = livesnum;
How would I achieve setting the textfield as the numeric value of the variable?
I've tried the following code to check if a dynamic text field has a number or string in it. My problem is that after adding the new if statement (first one) it's the only one that will execute so I don't even know if it's checking whether it's a number or not.
ActionScript Code:
doneBut.onRelease = function() {[code].....
I'm trying to get a slider to display a number in a Dynamic text field as it is dragged. I think this is the only time I can say it would be easier in AS3!
Sooo, I made the slider and the code to move it, but I cant get the number to pass into it. My trace command fires but I get some static numbers in the text box. I'm just so confused, is it my var, or the math operator, or just syntax?
code as I screwed it up ....
on (press) {
startDrag("", false, 0, 0, 200, 0);
var xmin : Number = min(0);
[Code].....
I am struggling trying to get this variable set. I want to set a variable number to be the frame number of a movieclip. this is what i am trying with no luck:
var fn:Number = movie_name._currentframe();
trace(fn);
I have looked at different online examples but cant find an example like this one.
Go into the 3D Studio Max link and in there you'll see my problem.....How can I get the text to format to the width of the dynamic text field? What I have are variables set up to load text from an uploaded .txt file, into the dynamic text field... it seems to run each line way over to the right...
View 3 RepliesThis should be basic enough but I'm having trouble troubleshooting it
var instrument:MovieClip=banjo;
instrument_txt.text="The " + String(instrument)+ " has been selected!";
I wanted this to result in dynamic text field displaying
"The banjo has been selected!" but it results in "The [Object MovieClip] has been selected!".
Is String(var) wrong command to use? The only reason I could think why it's not working is, that the variable has been stated as 'MovieClip' instead of Number or Text. What can be done in the case of MovieClip if this is correct?
P.S I'm wondering if there're rules on asking questions on this board... I've asked two for today already and they would be considered pretty 'basic' ones to professionals / experienced users on this board >_<
I have tested with frame number it works, it doesn't with label name. Is it possible ? In main.as:
public function gotoTab1(target:MouseEvent) {
gotoAndStop(1);
}[code]....
of course I give tab2 as label name to the frame at position 5.no error shows up.
I am trying to grab a string that is loaded into my dynamic text field and use it as a variable.
The text field is populated when another button is pressed first which says input_txt.text = "myInput"
...I gave my dynamic text field the instance name input_txt
So I wrote out (on a separate button):
on (release) {
var input:String = input_txt;
trace(input);
}
I get "undefined" as my output
Is there a way to adjust the height of a variable text fieldto match the dynamic content populated at run-time?I have a dynamic text field on the stage. I replace the copyin that field at run-time and it may be 1, 2, 3, or 4 lines long ifthe width of the text field stays the same. Is there a way tocontrol the height of the control to adjust to support only thenumber of lines needed? I'd like to set another control on thestage right below this field but I need the correct height of the
View 1 RepliesHow do you display a variable in a dynamic text field? (OOP)
View 0 Replieshow do you display a variable in a dynamic text field?
View 2 RepliesI have a timer that counts up to 60.
Within the timer function I have a variable that increments every second,
i.e second = second +1; I'm tracing that out and it counts up nicely on the trace output.
I want to add what I'm tracing to a text field on my stage so a text box will display the counting from 1 to 60.[code]...
I want to assign a variable "speed" to a dynamic text field with the instance "spdDisplay" and round it to two decimal places.I'm pretty new to flash but, this seems like it should be easy.Here is the code I have - it does not work
Code: Select allvar speed:Number = angle/2.1;
trace(speed.toFixed(2));
spdDisplay.text = (speed);
[code].....
I have a preloader. On one frame of the preloader is the code:
i++
loadtext = i;
emptyMC = "holder"+i
allimages._visible = false;
allimages.createEmptyMovieClip("holder"+i, i);
allimages[emptyMC].loadMovie("weddingsintro"+i+".jpg");
Everything works fine, but the dynamic textfield with the var name loadtext is blank. If i set loadtext = i+"loaded" then it just displays "loaded". I know the variable "i" has a value since the rest of the preloader works.
I have a variable that changes according to the position of a slider. I would like to display the numerical value of this variable inside a dynamic text field (created on the stage during authoring).I tried many approaches, but the one I was sure would work didn't. I referenced the "text" value of the dynamic text field from the frame in which the variable was instantiated and used. This did not work, so I am not sure what to do.[code]
View 4 RepliesI know you can read the contents of a text file into a dynamic text field at runtime. Can you also insert the string contents of a variable into a dynamic text field at runtime? I simply want a dynamic text field that says "Welcome back, <username>" I am doing it right now with a static text field and a dynamic one, but if the username is really short, the whole thing is not centered and looks weird. Optimally, it should all be part of one element on the stage.
View 9 RepliesI'm trying to create a temperature control box for a flash movie and i have it so that two arrows would control the temp, i can't seem to get them to increase the dynamic text field titled target_temp it sets it fine on the first load but then once I try to click the increase arrow the text field doesn't increase, do i need to reload the movie? here is the code I have so far.
Code:
on(release){
target=target-1;
target_temp.text=target;
}
I have a preloader. On one frame of the preloader is the code:[code]Everything works fine, but the dynamic textfield with the var name loadtext is blank. If i set loadtext = i+"loaded" then it just displays "loaded". I know the variable "i" has a value since the rest of the preloader works. Anyone know whats wrong?
View 4 RepliesThe following code, when attached to the MC panTracker_mc works as desired, passing the value of the dynamic text field with a VARIABLE name of s1Pan to s1 sound object, thus controlling the pan.
Code:
onClipEvent (enterFrame) {
s1Pan = Math.round(_root._xmouse/2.5)-100;
_root.s1.setPan(s1Pan);
[Code].....
im importing a few variables with this [code]but now how do i make a variable say root.cash into a a number which can be used in equations or used for logical compariosons such as < > ==
View 2 Repliesim importing a few variables with this
Code:
myVars = new LoadVars();
myVars.load("getinfo.php?user1="+userN+"&pass45="+passN+"&random="+refresh1,"0");
[code]......
What I got.
[Code]...
I apparently can't pass the score to the textBox.
1. How do I convert the variable to a string?
2. How do I update the textBox? I thought I saw some special method somewhere but I'm not sure where.
3. What is the best way of updating the 'score' variable.