the exemple was with a textfield. try to adapt it to a MC.here is my code.
Code:
var container:MovieClip = this.createEmptyMovieClip("container", this.getNextHighestDepth());
[code].....
I've created an empty movieclip in _root and loaded an image into it but whenever I do trace(_root.newMC._width) I get a 0! I've had this problem in the past but never really looked into it!
I have the following code:
Code:
with _root {
createEmptyMovieClip("file", 0).loadMovie("someimg.jpg");
["file"]._x = (Stage.width - ["file"]._width) / 2;
["file"]._y = (Stage.height - ["file"]._height) / 2;
lineStyle(3, 000000, 100);
[Code] .....
The problem I'm having with this is that when it looks for Stage.width it's actually trying to find _root.Stage.width. How do I get around that without breaking out of the 'with'?
I am creating a emptyMC that my splash page will open up on. So when I create a new symbol (my empty movie clip) how do I set the center point/orientation of it to the top left hand corner???
View 2 RepliesI'm loading a background into a background container with the following code:
loadMovie("backgrounds/bkg_wht.swf",bgContainer);
I'd like it to load in a 4 second alpha fading load instead of just a hard load. Any ideas what code I need to write?
I am working with a project that has many scenes. Each scene has a movie clip attached to it. The first scene is simple...just a couple of buttons and that is it. My worry is that when I add all of the videos that correspond with each button and publish the SWF will be a huge file. THE QUESTION: Does flash load ALL scenes of a movie or does it load the first scene and then load the other scenes when the user needs to view them?
My ultimate goal is to just have the first scene load and then when the user clicks on the buttons contained within that scene that only upon release does the corresponding scene load. Maybe I am doing this completely wrong and should look at doing it another way.
I have a rotaing menu that loads in images from an xml file, I would also like it to load in text info from the same xml file to the left side of the images that load in. In my main .fla have created a movieclip and called it 'textInfo' and inside that I have two dynamic text fields called 'headerText' and 'bodyText' where I want to load the text in. this is what I am using to loading in the text in my actionscript, is this correct?
[Code]...
I'm using loadMovie() to load external swf's and then send the swf to a specific frame, depending on the button that is pressed.
Code:
on(release){
_root.mc_mainloader.loadMovie("Main.swf")
_root.mc_mainloader.gotoAndPlay("fadeup");
}
Unfortunately it ignores the second line, which appears to be because the movie hasn't loaded by time it gets to the next line. As a work-around I made an interval to check for the movieclip width to be more than 0 and then run a function that chooses the desired frame, but this is very unreliable. Is there a simple way to load the clip and wait until it is finished, then immediately choose a frame on load?
I have a Flex application that just load an external SWF, but the application load and unload infinitely my swf.
[Code]...
Is there a way of making a normal loadVars.load load a url depending on a variable you set in the swf?
var reciever = new LoadVars();
loadurl = "test_onload_3.cfm?propertyID="+MY_VARIABLE_GOES_HERE;
reciever.load(loadurl);
so that I can set my variable and then load the variables with the propertyID that I choose in the swf??
The function below belongs to an XML based photoGallery.swf... Its menu is automatically populated from the same XML file as well (thumbnail picture, title, description). The pictures load into an empty mc called imageContainer.In another empty mc called textContainer, I would like to load some text.swf from the xml list as well.How would you include that in the code?
Code:
function loadTmbs () {
var tmbs:XML = new XML ();[code]......
So I have this flash app I'm making that uses a URL load to load a bunch of plot points from an address. When the loader finishes, it send the data to a plotter function. the plotter function clears the graphics in a shape called graphLine. It then draws a line from one plot point to another using the lineTo function. Basically every 3 seconds it makes this request and redraws the screen and updates the value of a textfield to the current y value. In flex builder 3, it works great in debug mode. The screen updates just fine. However, when I make the release build and test it out in a browser, it loads the data fine, but will not draw it until I stop the graphing process. Any thoughts on this one? Here's the code for the graphing function
[Code]...
I am pulling double duty with this question as it serves two purposes. I am developing a total flash controlled ad system for myself, but also need to use the same theory for a project for work.
Concept: I have a main movie (ad rotator system) that I then want to randomly load other swf's (individual ads) into this main swf after a set period of time. The random load I got set no problem. The problem I am having is to get it to move to the new Frame label of the main movie which then loads the smaller swfs. I am using the LoadMovie with nInterval time delay command in flash to load the movies.
[Code]....
I'm pretty new/bad at actionscript (3) for web. I have a site up for a client/friend [URL], but it takes FOREVER to load. I'm under the impression that a good way to make the site load faster is to load in swf's externally. Right now, the site, in its entirety, is one big movieclip. I have large images (movieclips) for background images. If you look at the site and are kind enough to wait for it to load (aprox. 45 seconds or so) you will notice how the background image changes when you click to go to each section.
I am trying to find a way to load in the background as external .swf's to cut down on the initial load time. I'm also open to any other ideas. Below is the as3 code for my buttons/how they direct the site. I'm hoping to use a similar/generic style to load the background images. I'm hoping to load the movieclips underneath the rest of the site, and use the same naming scheme (e.g. homeBTN.swf) to keep it organized.
[Code]...
An IE issue has me completely stumped. I have a coldfusion page that uses JQuery's AJAX .load function to load in a new flash file that is generated by coldFusion's cfchart tag. This works completely fine in firefox: the new flash file and new html elements load. However in IE: all of the html elements that are geneated with the flash object are loaded, except the flash object and embed tags do not show up at all after running an ajax call in IE. After looking in Fiddler, the flash application type response data doesnt even show up for IE. It does however for Firefox.I thought maybe it has to do with any kind of media, so i changed the chart type to output as a jpg file instead of flash. And it loads completely fine in IE. So something is preventing IE from receiving the flash response data.Here's what i've done so far - and no luck so far:
Added to the HTML header: <META
HTTP-EQUIV="CACHE-CONTROL"
CONTENT="NO-CACHE"><META
[code]....
I have a page that loads loads of swfs*. I'm loading in them all at the same time, Sequentially which is slowing down the intro animation. Is there a way to load swfs sequentially? Or if not load them on a timer (half a sec would do the trick I think)
*there lots of different dynamically generated Flex graphs so it's not possible to have them all in one.
[Code]...
I'm currently working on a project that contains a lot of data, about 14.000 records. This means an xml file of about 3mb. Now my question is: Should I use the xml file to load all the data at once, or should I use a webservice, that provides the data when I need it? Keep in mind that I'm new to webservices. And if I'm going to use a webservice: How do I store the data, in a mySQL database?How fast is a webservice?
View 1 RepliesI have a little app that can read and write content that is stored in XML files. As those files get updated and re-loaded quite often I have made the experience that the browser tends to use the old/cached XML-data. Can I somehow flag the URLLoader that I use to load the XML to always load the actual file instead of looking for cached versions?
View 4 RepliesI am stumped. I have tried to load a comboBox with a for-loop to load k school names and can not get it to load dynamically. Here is what works:schools_cb.addItem({label:varLoad.data.school1});It manages to paste the name of school1 into the comboBox k times.Then, when I try:schools_cb.addItem({label:this["varLoad.data.school" + k]});orschools_cb.addItem({label:this.getChildByName("var Load.data.school" + k)});it brings up k blank entries in the comboBox.I am a poor teacher trying to make a signup page for our school's math contest
View 5 RepliesI need some help? Anyone experience this problem before with IE8 FLASH bug? Can not get this to work on all subsequent refresh to the flash. I have a flash piece which simply renders only on the first initial load. After that, if i refresh or visit the page, it does not load correctly. It seems I am having this problem with the swf only on subsequent loading of the page or whenever a refresh happens.
View 1 RepliesI am trying to load, unload and load again the same movie clip from library.
View 7 RepliesWhen i try to load an external swf file using Loader.Load(); The swf starts playing even before the init event is fired. Is there any way to stop the swf from playing atleast until the init event or complete event is fired?
View 1 RepliesI am requesting an image via an ASP script: http:[url].....Shows up in browser but doesnt show up in flash when I use the moviecliploader to load it.I had a security error when I tried to load it earlier, but that warning doesnt show up anymore in the output window.
View 4 RepliesI'm loading (and unloading) external swfs into a holder in my main document. However, they seem to load perfectly the first time, but after that, they load at a different x and y. I've seen this happen before in someone else's file, but I'm not sure what the solution is.
This is the bare bones of it:
Code:
sceneHolder.x=0;
sceneHolder.y=0;
addChild(sceneHolder);
[Code].....
Okay so I am trying to load external swfs which load videos dynamically.
I can load the swfs into the parent fla fine (if I remove all the code and just place a circle or something on the stage of the swf), and the swfs are also loading their respective videos correctly. But when I try to load the external swfs, if they contain any casting related code in them, I'm getting an error
[AS]TypeError: Error #1009: Cannot access a property or method of a null object reference.
at swf1_fla::MainTimeline/frame1()[/AS]
Is there some specific method to casting within external swfs?
My code for loading the videos is this:
[AS]var vc:NetConnection = new NetConnection();
vc.connect(null);
var vs:NetStream = new NetStream(vc);
[Code].....
How I can make this script lo load mp3 files via an external xml file like music.xml and if is possible to load random
Code:
music = new Sound();
music.onSoundComplete = function() {
[code]....
the following code traces the loading status of '1.swf', and once it has loaded, starts loading '2.swf':
preload1.loadMovie("portfolio/100_design/1.swf");
onEnterFrame = preLoadMeter;
var tl:MovieClip = this;
[code]....
I have problems in running a projector under win 7. My projector load several SWF and each of them load different external MP3 that plays during the show.Under Win 7 sometimes the sound (Mp3) stops.
View 5 RepliesI cannot get animated gif to display before flash movie loads. I am using this script but does not seem to work. I do not want to use a flash loader.
<script type="text/javascript">
var image = new Image();
image.src = 'http://www.hmaimages.com/MN/flash_loader/loading.gif';
</script>
I make simple site but I have a little trouble with loading images. As you can see with new category there is new image. There is a problem, beacause only then img is loading, and I want to load all images when my site is loading. sample code how I operate with those img.
imgUrls.push("img/01.jpg");
imgUrls.push("img/02.jpg");
var k3:Boolean=false;
[Code]....
How can I load all img with site.?
What is the best way to load a big load of variables into Flash? There must be a way to do this withLoadVars and a for-loop.my txt file:
Code:
&prijsvraag_titel=Title of the prijsvraag&
&aantal_vragen=3&[code].....