ActionScript 2.0 :: No Scale On A Movie Clip Within 100% Scaled .swf?
Dec 27, 2005
I have a quicktime video at 620x480 that I would like to keep sharp and clean with no pixelation or video grain. Unfortunately, the client would like the rest of the movie to scale to 100% (the movie is a flash projector file and is not browser based). I'm aware of full browser flash option when the stage is set to "noScale", but is it possible to have a clip that loads into a scaled projector at fixed resolution? So far my approach is this:small flash projector file to "embed" flash player. This would be at 100% scale mode. Then I would have the video clip load into the main projector clip (as a .swf). The external clip (video) would be set to "noScale" mode. Would this adhere or would the noScale be overruled by the projector scale mode?
Is there an easy way to prevent particular elements in a percentage-scaled SWF from scaling? I want to make a liquid Flash interface in which only the content scales with the browser window, and the navigation elements remain a constant size.
I have a video inside of another movieclip. When I go full screen, I scale up the outer movieclip to fit the screen. So that OuterMovieClip.width is equal to screenWidth etc. How do I maintain the aspect ratio on my video so it does not get distorted? Whats the proper math for that?
What is the AS needed to scale a movie clip? I want it to be at 0% and then increase to 100%. I've searched through the forums and haven't found what I'm looking for yet - I'm a complete newbie when it comes to AS but here's what I have:
I've jumped in head first into Actionscript and I'm working my way through Adobe's Classroom in a Book for AS3. I've just completed chapter 4 and am currently trying to solve the "try on your own" problems at the end of the chapter.
Here's a problem that is stumping me:
Create a button to let the user set the size of the shapes that they paint.
And here is my code (the commented bits of code are solutions I tried but didnt work):
I'm trying to make a zoom in and out effect, on images in a movieclip, using the mouse wheel. But, there is another mouse event that scrolls through the frames of the movie clip. I need it to stay zoomed in, and out respectively, when you scroll to the next frame.
wanted to load an swf into an empty movieclipthen modify the empty movieclips xy scale, and xy positionrecall doing something like that b4, and it seemed like a simple enough taskbut for some reason this doesnt seem to wanna obey me at the moment
I'm trying to make a zoom in and out effect, on images in a movieclip, using the mouse wheel. But, there is another mouse event that scrolls through the frames of the movie clip. I need it to stay zoomed in, and out respectively, when you scroll to the next frame.
I'm creating a simple liquid flash site layout with one MC that does not scale and remains at a constant position, and one mc that should stretch to fit either the height or width (whichever's larger) of the stage, but scale proportionally. I thought I had a pretty good grasp on the code for that, but when I put it in, the mc doesn't scale at all, in fact it just disappears! Could anyone take a look and let me know if you see what's wrong?
Is there a easy way to scale the part of a masked movieclip that the user sees to a specific height? I want to ignore the masked part but scaleX scales using the dimensions of the mask.I'm assuming you can do this using bounds and getting the difference but am having trouble figuring this out.
i am trying to scale a movie clip to certain pixel dimensions with easing. I have four buttons on the stage and one mc( a square). when a button is pressed i want to scale the mc to a certain size. i.e button 1 scales the mc to 200 pixels by 500 pixels.
Essentially I have an animation with two main movie clips - a foreground and background movie clip.I want the foreground movie clip not to scale but the background movieclip to take the full screen of the browser.I'm only using vector images
Scenario: main moveiclip with 4 other clips in it. I want the rolledover clip to scale up and all the others to scale down and blur.
Question: What is the most effiecent way to code this. Would it be a "for in loop"? I am trying to minimize the code and would rather not use a whole bunch of if then statements.
I've been developing a web based pure ActionScript-3 (no MXML involved) videogame using FlashDevelop, and have had no real surprises so far. I've recently tried moving my project over to the trial (but fully functional) of Intellij-Idea and have found that while the .swf produced by Intellij still functions, it has somehow been scaled up so that all elements are twice the size. This is without me having made any code changes at all.
I am aware of stage.scaleMode, but am not using it in my code.I want to stress that I am not talking about any attributes of the HTML wrapper which normally presents the .swf, as this behaviour is evident even when I load the bare .swf into my browser.The only variables I can think of here are the parameters passed to the Adobe flex compiler - but I've looked through the available parameters and haven't seen anything likely.
is the way to test for the mouse being over a DisplayObject. This works if my movie is displayed at 100% scale. But if maximise my browser window so the Flash movie changes scale, it all goes to pieces.
I need to scale and clip images into square sized tiles to put into a tile list. Here's how
For each image, I want to scale the shorter side (either width or height) to fit in the tile using the "letterbox" scaleMode (so that it maintains aspect ratio).Then I want to position the image in the center and clip away anything left over from either both sides or the top and bottom.
I have an image with width=600px and height=1200px. First I want to scale the image to width=300px and height=600px (notice that aspect ratio is maintained), then center the image vertically and clip the image to 300 x 300.
Is this possible? This is actually a pretty standard way of displaying square thumbnails in many photo-based web sites, but I can't find a way to make it work in flex.
Im able to link to a movieclip inside a movieclipUnfortunately one of the movieclips now are a scrollbar and scroll. Now the actionscript isnt working?cal.onPress = function() {gotoAndPlay(2);message1.contentMain.message.total = unit1;
I am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
I'm creating a small drag & drop activity, and I want to be able to check and see if the dragged movie clip is completely within the bounds of another movie clip (or at least in the bounds of a certain x/y zone on the main stage. I can't use dropTest because it returns true if any tiny bit of the movie clip overlaps with the dropTest movie clip.
I also thought of something that just checks the x/y coordinates of the dragged movie clip, but I'd need this to reflect a range of values rather than one coordinate. For instance, I'd want to return true if the movie clip's x is between 50-60 AND the y is between 50-60. I'm attaching a small graphic to illustrate in case my explanation isn't clear enough [URL]
I have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) { _root.mouse_over_profile_btn = true; } on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
There is a bad gap in my knowledge with Event Dispatch and Event architecture, and this problem proves it. I've been getting nowhere on this problem for two days, I've posted everything to my Flash site. Go here, please: [URL] Click on "Flash Banners" The two thumbnails represent two different classes. Each class is identical. Both are "extends Movie Clip" classes. Tweeners of various types control the hover and click methods. URL Loaders load the thumnails which I then wrap in MC's and make them buttonMode = true, etc. Hover and click to load the Banners on the thumbnails.
I can't send an event from the Eagle movie clip or the T2D movie clip to tell the other to fade out. Both Banner classes are instantiated through a separate Base class. I'm sure this has to be an Event Dispatch from one MC to another and that it can't be done by the Base class. how I can send an Event or Event Dispatch and what the code structure is so one movie clip can in one class can tell the other movie clip in the other class to disappear while it's neighbour is playing. I'm happy to post code or explain / clarify anything that's not clear.
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
I'm loading png files on movieClips attached on the scene dynamically (reading an xml file). then i'm making a tween (with actionscript) to scale the container clip on RollOver.
the png file pixelate when the clip is scaled(to 110%).
