how to add dynamic text as the tutorial didn't work for me(that worked). but how to preload the text as it appears later than the movie which had already preloaded(i made a simple preloader for now) the address [URL]
View 13 Replies
After thinking over this for sometime It's a tad more advanced than i think I'm at, at the moment.So this idea for the preloader, its a single lined textbox 44 characters long. The idea is that once you click on the object a .length determines the length of the text then subtracts it from 44, then while the preloader.onLoadprogess is doing its thing i'd like to add a "."+preloaderStatus to the textfield (the preloaderStatus is the 10% etc to 100%)
So it'd start as :
1) Yaiks
2 while loading) Yaiks.....................20
3 finished) Yaiks.......... .......................100
But at the end the 100 will stop at 44 with the right amount of "..." in the middle determined by the length of the original text in the field.
I've watched Lee's video on the Flash CS4 preloader a few times now but have not been able to figure out how to switch a movieclip for the dynamic text field.
Here's what I'm trying to do. My logo is a handwritten font. I've used the eraser tool over 100 frames to simulate the handwriting taking place, during the preloading process. Hopefully this will start at Frame 1 and go up to Frame 100 based on the percent of the external file loaded.
I just don't get how to change the AS from the video tutorial to have it work for my application. I don't have the 'percent_text' dynamic field obviously so the two lines which pertain are wrong, but that still doesn't get the movieclip [called logoLoader] to engage the script.
Here is Lee's script:
Code: Select allvar l:Loader = new Loader();
l.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loop);
l.contentLoaderInfo.addEventListener(Event.COMPLETE, done);
l.load(new URLRequest("content.swf"));
[Code].....
If anyone has a minute, can you look at this script and spot the flaw. I got it fron[URL].. It MOSTLY works, the bar travels across as it is loading, but the dynamic elements (percent loaded, # of bytes loaded vs. # bytes total) are blank areas. Haven't a clue. I can e-mail you the Flash file, I saw no provision to upload it to this Forum.
[Code]...
I admit I'm fairly new to flash, but I've almost finished an entire RPG battle system complete with music [etc. etc.] - but my problem is trying to add a preloader.. I have a basic page which says "Loading" and has a Dynamic text box below which should read the Variable "_root.loadText". In the first frame I have this code:
[Code]...
and in the second just "_root.gotoAndPlay(1);" for the updating process. I'm sure that's all okay. But when I export it, then upload the swf file to somewhere like SwfCabin to show people for testing purposes, they have to wait on just a blank white screen for 1~3 minutes.. -note: I use both Adobe flash CS3 [at home] and Macromedia Flash 8 [at school] - I can stick to just CS3 if needed.
how to make text acting as a preloader so that its color changes as preloader percentage. i dont mean how to apply the math, i mean how to mask it or whatever action to achieve that effect?
like for example imagine the red is constantly growing to the right letter by letter (actually pixel by pixel:
i have a problem with the line space flash creates when a dynamic text is loaded in a dynamic text field on the stage i put a dynamic textFild with istance name "profile_text". then im loadin in it a text. my text is written in the Notepad like this
[Code]...
i already set a Textformat to my dynamic text with i tryied to play with the "Leading".. but i think it something dealing with paragraph. how i can decrease spacing between paragraphs??
All I want to do is add text from my string to dynamic text field when I click dynamic buttons. What should the as code be for this? Here is my code. Right now I just have the click returning another shape.
[Code]....
I know it's possible i saw it on several websites does some one know how i can use a static text in preloader counting to 100%? For an example look at ILOVETECHNO.BE The preloader a heart use a static text i think it cannot be a dynamic text because the font is not a normal average one
View 1 RepliesI've created preloaders for sites and I understand the mechanics of a preloader fine. They are not complicated. But in my current site I am making use of a lot of dynamic loading such as JPEGs and SWFs etc. I want to create a preloader that I can apply to anything I'm loading, basically just a colored rectangle with a loading bar.
I thought I could figure out how to create a dynamic preloader but it seems that I keep running into unusual constraints in Flash. My thinking was to make a movie clip preloader that I export for actionscript, then attach it to the stage and call a function passing it the object I am loading. Then this preloader would run the usual preloading script but instead of referring to the main timeline it would be referring to the object I passed in. I'm updating the load status with an onEnterFrame function but my preloaders start at 0% and don't change until 100% so obviously the clip is not updating and at this point I'm just not sure where to go with this preloader.
i have a dynamic preloader i'm working at that seem to give me problem, here the coding
Code:
loadPage(section,1,10);
//
function loadPage(sectionID, startID, endID) {[code]....
i think on this following line is not working, because when i trace the value, it only give "4"
Code:
var loadedBB = _root["tn"+i].holder.getBytesLoaded();
the images is loading, the problem seem to lies on the preloader only,
I have a carousel that I am creating that recieves information from an XML file that points to a couple of .png's with corresponding "tooltip" messages that pop-up on rollover. I have searched all over the place, and I can't quite seem to figure it out. Can someone help with a guide on scripting a simple preloader for the actual content that the XML files points to? I will give you my .fla and source code.
Code:
import mx.utils.Delegate;
var numOfItems:Number;
[code].....
break down preloader into smaller sections so i can understand it better , load a preloader but without the preloader bar graphic and preloader code of the bar and graphic, just see how to transfer the percentage of the movie which has loaded, and by showing the result in the dynamic percent_txt box on stage this preloader i am realy am finding difficult but i so need to understand the concept var percent:Number = Math.floor(_root.getBytesLoaded()/ _root.getBytesTotal()*100);
View 9 Repliesi read the Preloader and Transition for Dynamic Files tutorial by claudio and i tried to use twise in the project. it works fine, the buttons work, in fact i did not change the code in the tutorial_complete.fla, i did the same for the photos.fla, and it works fine, but when i published the tutorial_completes.wf, i came with these two problems:
when i click the photos button in the tutorial_complete.swf, it load the photos.swf, but the code in the photos.swf does not work. it tried to change the name of the instance names and the labels, but nothing. the effect in the main buttons is great, but there is a broblem in the in the photos.swf buttons. files zipped here:[URL]
how to create a preloader when im about to load a dymamic jpg or a movie.
View 1 RepliesIn this tutorial (Preloader and Transitions for Dynamic Files) there is an internal preloader that I wish to animate so it would paly a sequence before the new file loads. The sequence would then repeat itself until the new file does load.
View 5 RepliesThis pertains to the Preloader and Transition for Dynamic Files tutorial here on kirupa.
I've used this tutorial many times before but now for the first time i am using navigation that is inside a movie clip. instead of directly on the stage. I'm having problems with the content loading it just always says loading. Is there something that i would have to change in the transition code or my button code? all the code for my buttons is inside of nav_mc movie clip. here is my fla. to take a look at
Im making a flash intro that is 37 kb in size, and on top of that i want to pull in images dynamically. I am having a crapload of trouble trying to make a preloader that loads the swfs embedded contents AND the external stuff at the same time, all in one, and then starts playing.
Its either really jerky and retarded, doesnt display till the last 90% or so, loads the image after it starts playing, or just doesnt work at all. Ive tried tuts on the site but I cant get it working, cause they seem to be aimed at preloading external stuff in the swf once the swf itself has loaded and then you clik a button "Image 1" etc.
As far as I know theres in no way to cahnge the alpha of a dynamic text box. I put one in a movie clip and when i try to change the alpha of it everything else in it changes its alpha but the not the DT box. Could someone plz verify for me that u can't change alpha and help me find a component that allows alpha control with a dynamic text box. thx in advance.
View 5 RepliesI'm relatively new to Actionscript, in fact, I just figured out today how to load text from an external source. I have another issue that I'm not sure how to handle. I have buttons for my main nav, a main text box, and a mini text box (both text boxes are loaded dynamically from external files). I want to have the mini text box load new external text files in the main text box. For instance, I have a button for music, which loads a list of songs in the mini text box. I want to be able to click on the name of one of the songs and have it load the lyrics in the main text box. I'm sure it's simple, I'm just new.
View 3 RepliesI have another issue that I'm not sure how to handle. I have buttons for my main nav, a main text box, and a mini text box (both text boxes are loaded dynamically from external files). I want to have the mini text box load new external text files in the main text box. For instance, I have a button for music, which loads a list of songs in the mini text box. I want to be able to click on the name of one of the songs and have it load the lyrics in the main text box.
View 3 RepliesI've found this tutorial on kirupa.com and i can't use it in flash as3 ( its as2 source code) . Dont know how to transform it into as3.
[URL]
I've change _root. with MovieClip(root).
I can't do anything with this:
Code:
onClipEvent (enterFrame) { if (!loaded && this._url != _root._url) {
if (this.getBytesLoaded() == this.getBytesTotal()) {
loaded = true;
[code]....
I used the 'Preloader and Transition for Dynamic Files' Tutorial from the tutorials section
here is a link [URL] and have to say, I learned soooo much from it, and incorporated it into my website [URL]. How to put a percentage preloader for each of the sections when they load. The heavier the .swf file you are loading, the longer it takes, and I've gotten comments about this saying they would like to know how long they have to wait until they see something.
Problem: I am trying to get a very simple text resize going, for my main content area in a flash website. My aim is to get a button, that on click, increases the text size of a dynamic text field.
[Code]....
This is what I tried, I am very new to Action Script, so excuse the futility of my code.
If you take a look at my flash movie you will see that I have draggable movie clips, which contain dynamic text fields. These text fields contain text drawn in from a simple xml document. The problem I have is that the text in the text fields is hedged right next to the border of the autosized text box. This makes them look untidy and in the worst case difficult to read. I wonder how I can add some margin to the left and right of the text to fill in some space.The code which formats the text boxes is:
with (main["dragAct"+i].dragActText) {
text = actText[i+1];
background = true;
[code]....
I have 4 dynamic text boxes which duplicates the text from a main input text box. How do I write a code to make visible only the dynamic text box I want when clicked it's check box.What is the CODE to make each "DYNAMIC TEXTBOX" visible when clicked on it's checkbox?
View 6 RepliesI have a dynamic text on the stage which gets updated (shows numbers) when some buttons are pressed.I just need to know if it is possible to show the first dynamic textfield in another dynamic textfield.Lets say the first dynamic textfield called "price" and the second one called "price2". when a button is pressed, the first dynamic textfield "price" will show a number. is it possible to show whatever is shown in the "price" in "price2" ?
View 1 RepliesI'm creating an XML-driven pie chart in AS3 with 2 text boxes in each pie slice. Both text fields are dynamic in the sense that they are populated by the XML doc and then told where to place themselves in the AS3. I've got them both using the same x and y position to place themselves at the moment (which of course puts them right one top of each other), but I'd like to make one of the fields (which acts like a label or a title to the larger number and % text field) place itself in a particular spot around the other text field. The result I'm looking for is to have the smaller "title" text field appear approximately 5 pixels above and left-justified to the larger "percentage" field.
Anyway, here are two sections of code that I've currently got. The first chunk, for the Tags portion, sets the position for the "percentage" text field using a good old x and y method. The second chunk, for Titles, is setting the position for the smaller "title" text.
//evaluate tags
private function evaluateTags():void{
for (s=0; s
[Code]....
i found out when i add a dynamic mask to my preloader progress bar (for transition out) its not scaling correct. I think its because my bar isn�t tweening to the correct "stageWidth" during progress until it completes. I setted it up like that:
// Preloder Progress Bar
Code:
bar.scaleX = 0;
bar.graphics.beginFill(0xff3333,1);
bar.graphics.drawRect(0,0,stage.stageWidth,4);
[code]....
Somehow it looks like 100% of the loading progress doesn�t represent the entire stageWidth so my bar animation finishes some pixels before reaching stageWidth end. NowJust noticed it now after adding a dynamic mask to my preloaders progress bar.
ANYONE KNOW HOW TO Preloader and Transition for Dynamic Files AND Transitions Between External SWFs MIX TOGHETER...
View 1 Replies
