ActionScript 3.0 :: When Add A Dynamic Mask To Preloader Progress Bar (for Transition Out) Its Not Scaling Correct
Aug 11, 2010
i found out when i add a dynamic mask to my preloader progress bar (for transition out) its not scaling correct. I think its because my bar isn�t tweening to the correct "stageWidth" during progress until it completes. I setted it up like that:
// Preloder Progress Bar
Code:
bar.scaleX = 0;
bar.graphics.beginFill(0xff3333,1);
bar.graphics.drawRect(0,0,stage.stageWidth,4);
[code]....
Somehow it looks like 100% of the loading progress doesn�t represent the entire stageWidth so my bar animation finishes some pixels before reaching stageWidth end. NowJust noticed it now after adding a dynamic mask to my preloaders progress bar.
View 9 Replies
Similar Posts:
Feb 8, 2006
i read the Preloader and Transition for Dynamic Files tutorial by claudio and i tried to use twise in the project. it works fine, the buttons work, in fact i did not change the code in the tutorial_complete.fla, i did the same for the photos.fla, and it works fine, but when i published the tutorial_completes.wf, i came with these two problems:
when i click the photos button in the tutorial_complete.swf, it load the photos.swf, but the code in the photos.swf does not work. it tried to change the name of the instance names and the labels, but nothing. the effect in the main buttons is great, but there is a broblem in the in the photos.swf buttons. files zipped here:[URL]
View 1 Replies
Sep 30, 2007
This pertains to the Preloader and Transition for Dynamic Files tutorial here on kirupa.
I've used this tutorial many times before but now for the first time i am using navigation that is inside a movie clip. instead of directly on the stage. I'm having problems with the content loading it just always says loading. Is there something that i would have to change in the transition code or my button code? all the code for my buttons is inside of nav_mc movie clip. here is my fla. to take a look at
View 1 Replies
Apr 22, 2012
I've found this tutorial on kirupa.com and i can't use it in flash as3 ( its as2 source code) . Dont know how to transform it into as3.
[URL]
I've change _root. with MovieClip(root).
I can't do anything with this:
Code:
onClipEvent (enterFrame) { if (!loaded && this._url != _root._url) {
if (this.getBytesLoaded() == this.getBytesTotal()) {
loaded = true;
[code]....
View 2 Replies
Mar 6, 2004
I used the 'Preloader and Transition for Dynamic Files' Tutorial from the tutorials section
here is a link [URL] and have to say, I learned soooo much from it, and incorporated it into my website [URL]. How to put a percentage preloader for each of the sections when they load. The heavier the .swf file you are loading, the longer it takes, and I've gotten comments about this saying they would like to know how long they have to wait until they see something.
View 3 Replies
May 15, 2008
ANYONE KNOW HOW TO Preloader and Transition for Dynamic Files AND Transitions Between External SWFs MIX TOGHETER...
View 1 Replies
Jun 8, 2008
I have a background with a bitmap fill in it. The background is just a rectangle [drawRect(0,0,stage.stageWidth,stage.stageHeight)]. It get's a repeated bitmap fill and everything works fine.My problem is whe the stage is resized. If I simply set the height and width of the rectangle the fill gets stretched (even when I re-apply the fill). If I redraw the rectangle and re-apply the fill everything works fine.it.
View 2 Replies
Mar 25, 2009
I'm created a grid of squares and when the users mouse is within 100 pixels of a square it scales up. This is pretty easy and is code that is widely out online.When a square scales up I need the others to move position accordingly to the new scaled square. This is where I am running into trouble. Here is what I have so far.
Code:
public function updateGridPositions() : void
{
for (var i:int = 0; i < gridItemsArr.length; i++) {[code]......
I use TweenLite for the tweening engine. Can anyone help in trying to figure out how I can keep the spacing of the grid correct according to the scaling of each item in the grid.
View 9 Replies
Jan 27, 2012
I have the following code from FW to scale my background image while keeping proportion, however how do I change/fade into other pictures using Pic as my MC?
Code:
//set stage for FBF
//set stage for FBF
stage.align = "TL";
[code].....
View 9 Replies
Sep 15, 2009
I just started working on a preloader screen that includes a preloader mask over a logo and a percentage dynamic text. I can get either or to work but not both at the same time. I notice that if I remove stop(); I can get the percentage to work but not the preloader image. With the stop(); embedded the image preloader works but the percentage doesn't.
[Code]....
View 2 Replies
Nov 1, 2009
This is weird because I cannot see how a browser can have any affect on a SWF file animation. This SWF contains masking of images. The SWF appears perfectly in Safari, and for some strange reason, one of the three masks is not applied when viewing the SWF in IE (as if the image is 'released').
View 1 Replies
Jan 31, 2012
how to create a fullscreen mask transition like the example of - www(dot)hellohikimori(dot)com/#/home - If you hover over the "works" menu link then choose a project, you can see the transition effect
View 0 Replies
Oct 26, 2005
here is the script that i am using.
Code:
myMCL.loadClip("load.swf", 50);
var myMCL:MovieClipLoader = new MovieClipLoader();
[code].....
View 1 Replies
Jan 8, 2010
the image I load using the tutorial loads really fast (it's only 240kb) which basically means that the progress bar just blinks and completes so fast that people who don't know what's going on won't know what just blinked.
My question therefore is this:Is it possible to tell the preloader, that even if the image is already loaded, the progress bar will take for example 2 seconds to complete?
That way people with fast connections will see the preloader for 2 seconds and people with slower connections will see the preloader for whatever time it takes to load the image.
Here's the code from the tutorial:
Code:
var imageLoader:Loader;
function loadImage(url:String):void {
// Show Preloader
preloader_projekt1.visible = true;
[code]....
View 2 Replies
Mar 27, 2010
I have made my first flash website. I want to add a progressbar (preloader) for my welcomepage. I tried the progressbar component, but I couldn't find any way to match the time which is needed for swf to be loaded whith the time that longs the progressbar to ritch 100%.
View 1 Replies
Apr 8, 2011
I've been testing a file from my server and I'm getting varying results using different browsers. IE8 is displaying the file as intended however Firefox and Chrome give me an annoying little glitch. The problem lies with the way my preloader reacts using the MovieClipLoader class.
I have a main file with subsections where swfs are loaded in to blank clips. I'm using a preloader to display their progress and the preloader displays an animation by percentage increment up to 100%. If the target clip is not yet loaded then the preloader functions as intended across all browsers. However, if I revisit an already visited section where the preloader should not display due to the file having been already loaded, I'm getting a brief flicker (around 1 frame) of the preloader in a random state of load progress. Again, this does not apply to IE8 - everything there seems to be in order.It's as though it's firing onLoadProgress for a brief instant instead of just going to onLoadComplete.
View 1 Replies
Sep 1, 2009
I've got two preloaders that I've made from the same template, but I can't get the progress to show. It simply shows a quick glimpse of the finished image and then goes to frame two.
View 2 Replies
Jun 26, 2011
I studied the above mentioned tutorial. I used this code.
function SetProgress(value:Number)
{
progress.width = value*base.width;
}
preloader.SetProgress(.5);
When I experimented it, got an error like this.
Access of undefined property base.
I gave all the movieclip names correctly.
View 1 Replies
Sep 19, 2011
I've made a simple preloader to my animation and its works great except transition between last frame and second frame (1 frame is preloader). In animation it looks for a disappear for a moment. For many flashes it doesnt make problem but in my case I must have continuously play after loading my flash. I'm attaching a ".fla" file to my post. [URL]. I think I must use loop in timeline from 2 frame to last after the preloader appear... but how I can do that...
View 5 Replies
Apr 23, 2007
Everything was going great with the advanced buttons and external page transitions.. But when I add a preloader the external pages no longer load.[code]I'm assuming its something here.. Like I need to tell it something like its off the _root. now because of the preloader being on a sense before.[code]
View 1 Replies
Aug 1, 2003
my question is why the transition animation sosen't work on this code i already read the tutorial at kirupa, but im using diffrent code
View 5 Replies
Jun 21, 2006
How to show the Progress bar at 0%, as it currently shows around 50%+ rather than starting at 0%.
View 3 Replies
Aug 24, 2009
I'm writing a simple image preloader and attempting to use ProgressEvent.PROGRESS on my Loader to update a simple graphic bar. All pretty standard fare so far, so I'll show you the code:
Code:
package {
import flash.display.Loader;
import flash.display.MovieClip;
import flash.display.Sprite;
import flash.events.Event;
The problem is that the "loadingProgress" function gets called twice by the aforementioned listener and so adds the ENTER_FRAME listener twice. Then, only one is removed so if I trace the value of "percentLoaded" it never stops. Is it standard that the PROGRESS event calls it's given function twice? If so, I obviously need to rethink the updating of the loader graphic.
View 7 Replies
Dec 30, 2004
1.) The problem with me is that I like sharp design.. so if I see that my preloader with a progress (width=100 pixels) bar is a little blurry.. I'm going crazy.. I already tried to set everything up on position (0,0) didn't help me much.. I think it have something to do with the frames of my movie.. pls help me out on this one.. any resorces on how to make a sharp progress preloader???
2.) My second problem is that I want to make a preloader on preloader like kigot.com have..
View 5 Replies
Jun 21, 2009
My preloader_mc has a layer with a movie clip called preloaderFill_mc. The I don't know why my preloader isn't scaling. The function is at the bottom.
Code:
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
stop();
var imgLoader:Loader = new Loader;
[Code] .....
View 0 Replies
Feb 3, 2010
I'm trying to make it so that the first 99 frames of a 198 frame preloader run even when the swf is loaded into the cache. I have the script looping the second 99 frames of the preloader while the movie is loading, but when it's already loaded, I only want the first 99. Right now, when the movie is already loaded, I'm only able to skip over the preloader altogether and go right to the movie OR I can see a loop that starts at the beginning of the preloader and then cycles through the second 99 frames indefinitely and never goes on to the movie that's loaded.
At first I was using two separate movie clips, one for the first 99 frames and another for the second 99, but since that didn't work, I combined the files to see if that would work, but it didn't. Is it even possible to use a conditional with the onComplete function that's supposed to run when the loading is done, so that onComplete only happens if the current frame of the preloader is greater than 99? Here's my script for frame 1 of my movie. The movie proper starts on frame 2, and preloader is the 198 frame movie clip in the library. The result of this script is an endless cycling of the preloader even when the movie's loaded.
stop();
preloader.play();
function everyFrame(event:Event):void {
if (preloader.currentFrame == 198) {
preloader.gotoAndPlay(100);
[Code] .....
View 3 Replies
Nov 3, 2009
I'm trying to set up a preloader to show the load progress of the main swf, which has all of it's assets embedded. I found the factory class method as described on bit-101, but no load progress ever seems to show. The swf loads fine, but the bytesLoaded is always equal to bytesTotal and therefore the preloader is never called.
[Code]...
This correctly calls the Factory class first, and then instansiates Main and calls init(). But as I mentioned above the preloading is never shown as it seems to be loading everything straight away.Is this a problem with the way I'm embedding the images or because I'm testing locally?
View 3 Replies
Jun 1, 2010
I know how to setup a preloader and I have that working. But when I debug the flash application and simulate a download, it has a blank background until a few seconds have passed. I know it is "downloading" the swf file and I'm wondering if I can show a progress bar for that, or do I need to have the swf file as small as possible and pre load everything needed and have all assets as a separate file I fetch? I found something with ProgressEvent.PROGRESS but this only loads after the flash file is finished downloading.
View 1 Replies
Dec 30, 2004
1.) The problem with me is that I like sharp design.. so if I see that my preloader with a progress (width=100 pixels) bar is a little blurry.. I'm going crazy.. I already tried to set everything up on position (0,0).. I think it have something to do with the frames of my movie.. pls help me out on this one.. any resorces on how to make a sharp progress preloader?
2.) My second problem is that I want to make a preloader on preloader like [URL] have.. I did a "little" research but couldn't find anything..
View 5 Replies
Feb 17, 2006
Discovered yesterday that the preloader I've been working with (loads external SWFs into levels based on this tutorial) which works fine on a local preview and IE, is having some major issues in Firefox. I thought this was a little bizarre at first but have since discovered that it could be something to do with 4 bytes that IE ignores but Firefox has a problem with. I've been searching for a solution that I can use pretty much constantly since then, and I'm stumped. Here's a link if you want to see it in (in)action: link
In IE, everything is good. Page loads, preloader starts at the bottom of the progress bar and progress is acurate. In Firefox, page loads, external swfs DO preload but progress bar doesn't display. When swfs are 100% loaded, the full progress bar appears with my "click to enter" link. But people will definitely have left the page thinking nothing is happening by then.
[Code]...
View 2 Replies
