ActionScript 3.0 :: Frame Preloader - Conditional Within Loading Progress
Feb 3, 2010
I'm trying to make it so that the first 99 frames of a 198 frame preloader run even when the swf is loaded into the cache. I have the script looping the second 99 frames of the preloader while the movie is loading, but when it's already loaded, I only want the first 99. Right now, when the movie is already loaded, I'm only able to skip over the preloader altogether and go right to the movie OR I can see a loop that starts at the beginning of the preloader and then cycles through the second 99 frames indefinitely and never goes on to the movie that's loaded.
At first I was using two separate movie clips, one for the first 99 frames and another for the second 99, but since that didn't work, I combined the files to see if that would work, but it didn't. Is it even possible to use a conditional with the onComplete function that's supposed to run when the loading is done, so that onComplete only happens if the current frame of the preloader is greater than 99? Here's my script for frame 1 of my movie. The movie proper starts on frame 2, and preloader is the 198 frame movie clip in the library. The result of this script is an endless cycling of the preloader even when the movie's loaded.
stop();
preloader.play();
function everyFrame(event:Event):void {
if (preloader.currentFrame == 198) {
preloader.gotoAndPlay(100);
[Code] .....
View 3 Replies
Similar Posts:
May 31, 2006
I'm trying to make it so that the first 99 frames of a 198 frame preloader run even when the swf is loaded into the cache. I have the script looping the second 99 frames of the preloader while the movie is loading, but when it's already loaded, I only want the first 99. Right now, when the movie is already loaded, I'm only able to skip over the preloader altogether and go right to the movie OR I can see a loop that starts at the beginning of the preloader and then cycles through the second 99 frames indefinitely and never goes on to the movie that's loaded. At first I was using two separate movie clips, one for the first 99 frames and another for the second 99, but since that didn't work, I combined the files to see if that would work, but it didn't. I've tried so many adjustments, I've run out of ideas. Is it even possible to use a conditional with the onComplete function that's supposed to run when the loading is done, so that onComplete only happens if the current frame of the preloader is greater than 99?
Here's my script for frame 1 of my movie. The movie proper starts on frame 2, and preloader is the 198 frame movie clip in the library. The result of this script is an endless cycling of the preloader even when the movie's loaded.
stop();
preloader.play();
function everyFrame(event:Event):void
{
[code]....
View 9 Replies
Sep 2, 2009
I am trying to figure out how to add a preloader to my source, but i have an issue everything i have written is loaded externally through actionscript on frame 2, but it still shows everything loading on frame 1.
Here is what the bandwidth meter shows... it is showing everything on frame 1.
I need the preloader to load on frame1, and its not working. Instead the preloader loads with the rest of the site, and dissapears right away.
View 2 Replies
Feb 26, 2010
I am building a web site and I have the main movie, which loads a picture gallery (another .swf file) using "loadMovie();" and then the problem comes in - my gallery movie has a preloader which after finishing is supposed to move on frame 2 of the gallery movie, but instead of that it moves to frame 2 of the main site...
This is the main movies button code loading the gallery:
on(release) {
gotoAndStop(5);
Gallery_Sub.loadMovie("../Flash/murals.swf");
Here is my preloaders code on the frame 100:
_level0.gotoAndPlay(2);
And at last my gallery movie's code on the preloader frame:
stop();
percent = Math.floor(getBytesLoaded()/getBytesTotal()*100);
if (percent == 100){
_level5.gotoAndPlay (2);
}else{
_preloader.gotoAndPlay(percent);
}
I tried using loadMovieNum(); but somehow it didn't work as well.
View 3 Replies
Oct 26, 2005
here is the script that i am using.
Code:
myMCL.loadClip("load.swf", 50);
var myMCL:MovieClipLoader = new MovieClipLoader();
[code].....
View 1 Replies
Jan 8, 2010
the image I load using the tutorial loads really fast (it's only 240kb) which basically means that the progress bar just blinks and completes so fast that people who don't know what's going on won't know what just blinked.
My question therefore is this:Is it possible to tell the preloader, that even if the image is already loaded, the progress bar will take for example 2 seconds to complete?
That way people with fast connections will see the preloader for 2 seconds and people with slower connections will see the preloader for whatever time it takes to load the image.
Here's the code from the tutorial:
Code:
var imageLoader:Loader;
function loadImage(url:String):void {
// Show Preloader
preloader_projekt1.visible = true;
[code]....
View 2 Replies
Mar 27, 2010
I have made my first flash website. I want to add a progressbar (preloader) for my welcomepage. I tried the progressbar component, but I couldn't find any way to match the time which is needed for swf to be loaded whith the time that longs the progressbar to ritch 100%.
View 1 Replies
Apr 8, 2011
I've been testing a file from my server and I'm getting varying results using different browsers. IE8 is displaying the file as intended however Firefox and Chrome give me an annoying little glitch. The problem lies with the way my preloader reacts using the MovieClipLoader class.
I have a main file with subsections where swfs are loaded in to blank clips. I'm using a preloader to display their progress and the preloader displays an animation by percentage increment up to 100%. If the target clip is not yet loaded then the preloader functions as intended across all browsers. However, if I revisit an already visited section where the preloader should not display due to the file having been already loaded, I'm getting a brief flicker (around 1 frame) of the preloader in a random state of load progress. Again, this does not apply to IE8 - everything there seems to be in order.It's as though it's firing onLoadProgress for a brief instant instead of just going to onLoadComplete.
View 1 Replies
Sep 1, 2009
I've got two preloaders that I've made from the same template, but I can't get the progress to show. It simply shows a quick glimpse of the finished image and then goes to frame two.
View 2 Replies
Jun 26, 2011
I studied the above mentioned tutorial. I used this code.
function SetProgress(value:Number)
{
progress.width = value*base.width;
}
preloader.SetProgress(.5);
When I experimented it, got an error like this.
Access of undefined property base.
I gave all the movieclip names correctly.
View 1 Replies
Jun 21, 2006
How to show the Progress bar at 0%, as it currently shows around 50%+ rather than starting at 0%.
View 3 Replies
Aug 24, 2009
I'm writing a simple image preloader and attempting to use ProgressEvent.PROGRESS on my Loader to update a simple graphic bar. All pretty standard fare so far, so I'll show you the code:
Code:
package {
import flash.display.Loader;
import flash.display.MovieClip;
import flash.display.Sprite;
import flash.events.Event;
The problem is that the "loadingProgress" function gets called twice by the aforementioned listener and so adds the ENTER_FRAME listener twice. Then, only one is removed so if I trace the value of "percentLoaded" it never stops. Is it standard that the PROGRESS event calls it's given function twice? If so, I obviously need to rethink the updating of the loader graphic.
View 7 Replies
Dec 30, 2004
1.) The problem with me is that I like sharp design.. so if I see that my preloader with a progress (width=100 pixels) bar is a little blurry.. I'm going crazy.. I already tried to set everything up on position (0,0) didn't help me much.. I think it have something to do with the frames of my movie.. pls help me out on this one.. any resorces on how to make a sharp progress preloader???
2.) My second problem is that I want to make a preloader on preloader like kigot.com have..
View 5 Replies
Nov 3, 2009
I'm trying to set up a preloader to show the load progress of the main swf, which has all of it's assets embedded. I found the factory class method as described on bit-101, but no load progress ever seems to show. The swf loads fine, but the bytesLoaded is always equal to bytesTotal and therefore the preloader is never called.
[Code]...
This correctly calls the Factory class first, and then instansiates Main and calls init(). But as I mentioned above the preloading is never shown as it seems to be loading everything straight away.Is this a problem with the way I'm embedding the images or because I'm testing locally?
View 3 Replies
Jun 1, 2010
I know how to setup a preloader and I have that working. But when I debug the flash application and simulate a download, it has a blank background until a few seconds have passed. I know it is "downloading" the swf file and I'm wondering if I can show a progress bar for that, or do I need to have the swf file as small as possible and pre load everything needed and have all assets as a separate file I fetch? I found something with ProgressEvent.PROGRESS but this only loads after the flash file is finished downloading.
View 1 Replies
Dec 30, 2004
1.) The problem with me is that I like sharp design.. so if I see that my preloader with a progress (width=100 pixels) bar is a little blurry.. I'm going crazy.. I already tried to set everything up on position (0,0).. I think it have something to do with the frames of my movie.. pls help me out on this one.. any resorces on how to make a sharp progress preloader?
2.) My second problem is that I want to make a preloader on preloader like [URL] have.. I did a "little" research but couldn't find anything..
View 5 Replies
Feb 17, 2006
Discovered yesterday that the preloader I've been working with (loads external SWFs into levels based on this tutorial) which works fine on a local preview and IE, is having some major issues in Firefox. I thought this was a little bizarre at first but have since discovered that it could be something to do with 4 bytes that IE ignores but Firefox has a problem with. I've been searching for a solution that I can use pretty much constantly since then, and I'm stumped. Here's a link if you want to see it in (in)action: link
In IE, everything is good. Page loads, preloader starts at the bottom of the progress bar and progress is acurate. In Firefox, page loads, external swfs DO preload but progress bar doesn't display. When swfs are 100% loaded, the full progress bar appears with my "click to enter" link. But people will definitely have left the page thinking nothing is happening by then.
[Code]...
View 2 Replies
Feb 22, 2006
why the preloader script below might not be working correctly in all browsers? It definitely loads the files properly, but the progress bar does not show in firefox. It just shows a blank screen until the files are 100% loaded, then the enter site logo appears.
I have tried the following things:
1. Using relative vs absolute file paths for the external swfs makes no difference to the behaviour.
2. Changed publish settings to export AS classes in other than the first frame - didn't have any anyway. No change.
3. Unchecked "export in first frame" for absolutely everything. Tried both checking and unchecking this for the actual loader_mc. No change.
I'd post my fla instead of code, but I'm using Flash 8 and can't save any earlier than MX2004 and people don't really seem to look at them that much when I post them. If anyone would like to see, I will upload.
Preload code (on main timeline)
Code:
stop();
onEnterFrame = function()
{
[Code].....
View 1 Replies
Jul 15, 2011
My project Home Page contains several 'heavy' instances on stage. So as to entertain a visitor while all they are loading I start preloading transition. However despite all my efforts my custom preloader delays displaying preloading progress for a while: althoug preloader wheel rotates, progress value displays as 0% for several seconds - from 1-3 seconds in normal browsers up to 5-6 seconds in Safari (which I consider to be worst one for Flash). if someone could clarify me whether I should listen for ALL the children loading progress so as to fix this issue or just never mind (e.g. every button on stage consists of two VideoPlayers, one TLFTextField, one Timer, two Sprites and one attached sound; now I'm listening for two VideoPlayers loading progress only...)
[CODE]...
View 12 Replies
Jan 14, 2011
How can I command the pre-loader to track the progress of the download?
public function loadImage(filename:String):void
{
// show the preloader
reloader.visible = true;
[Code].....
View 1 Replies
May 27, 2011
I have created the following preloader saved as "preloader.swf" that loads an external SWF file as follows:[code]I was reading to try avoid the PROGRESS and COMPLETE events since these events don't work 100% of the time.Now my question is this: is there a way of how I can go about to have the same functionality of loading an external SWF file (as above) but WITHOUT using the PROGRESS and COMPLETE events?
View 1 Replies
Jul 9, 2009
I have the following:
[Code]...
Everything runs fine except the progress bar doesn't seem to be monitoring the FOB movieclip.
View 9 Replies
Jun 13, 2011
I used the preloader AS3 found here and it work fine localy but in firefox 4.0.1 it doesnt show the percent and the scale of the progress bar.
is there an issue ?
View 1 Replies
Jul 30, 2008
I'm currently working on a puzzle. The objective of the puzzle is to place the numbers in order from 1 - 10. Once the puzzle is complete you're taken to a specific frame.However, I want to be able to go to 1 of 2 frames depending on how long it takes to complete the puzzle.Each number has the following code:
on (press) {
startDrag(this, true);
}
on (release) {[code]....
View 2 Replies
Aug 11, 2010
i found out when i add a dynamic mask to my preloader progress bar (for transition out) its not scaling correct. I think its because my bar isn�t tweening to the correct "stageWidth" during progress until it completes. I setted it up like that:
// Preloder Progress Bar
Code:
bar.scaleX = 0;
bar.graphics.beginFill(0xff3333,1);
bar.graphics.drawRect(0,0,stage.stageWidth,4);
[code]....
Somehow it looks like 100% of the loading progress doesn�t represent the entire stageWidth so my bar animation finishes some pixels before reaching stageWidth end. NowJust noticed it now after adding a dynamic mask to my preloaders progress bar.
View 9 Replies
Apr 21, 2003
When calling a swf with a two-scene preloader from within a Flash interface, the load status bar pops up showing 100% loaded, and the loader bar just sits there like that until the movie loads. The preload progress bars work as expected when the swf's are called from an HTML page.
View 4 Replies
Nov 9, 2011
i have some linkedlist or tree-structure contents(images,sounds etc.) I want to pre-load next items(content) to cache while user interacting with current content. Thus, when user want to see next content, it'll show immideately and start loading next content in the background.For an example, Assume in image gallery in the tree structure. While user looking at the picture, i want to load next nodes of tree silently to improve speed.
View 7 Replies
Dec 21, 2009
I've created a progress bar animation to load an external SWF file as described in this document: [URL] The problem is, the SWF file i want to load is a magazine exported from Indesign, so I want it to display one page (frame) at a time (you can go to the next page using the navigation buttons provided). When I use the method mentioned above the clip loads, but then it plays... so how can i make it stop at the first frame?
View 4 Replies
Jul 29, 2009
How can we localize the Flash Loading Progress bar ?
Attachments:
Progress+bar_Not+Localized.JPG
(14.2 K)
View 1 Replies
Aug 16, 2011
My application has a couple of modules which am loading as thus in my application.
<local:moduleloader url="Module1.swf" id="modulel" />
<local:moduleloader url="Module2.swf" id="module2" />
Then while loading each module I am showing the progress bar. The progress bar shows but does not go away. It remains above the whole frame of the application. The module loader is as follows:(Also note that in Flex 3 the same works, but am using Flex 4 and in Fx 4 it does not)
<mx:ModuleLoader xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx"
[code].....
View 2 Replies
