Everything was going great with the advanced buttons and external page transitions.. But when I add a preloader the external pages no longer load.[code]I'm assuming its something here.. Like I need to tell it something like its off the _root. now because of the preloader being on a sense before.[code]
View 1 Replies
I am trying to create a page transition that will play a movieCLip transition into a page. and then it stops then when another button is pressed, it will play that transition out while loading the appropriate one. In the attached FLA, if you click on the red button first, the blue transition plays,
--red button code--
mybutton1.onRelease=function(){
_root.transitionClip.play();
}
and then stops on the stage. When you click the green button second,
--green button code --
mybutton2.onRelease=function(){
_root.transitionClip.play("out");
_root.transitionClip2.play();
}
it works correctly/ Playing out of the blue Transition and into the Red transition. However if I click it again it does the opposite, and just keep alternating.
If I add the
_root.transitionClip2.play("out");
to the first button then, nothing works right. I will eventually have more buttons, and may need to use a variable to control which "out" transitions is played, but how do I get the buttons to do this?I just want it to exit the current movie clip and play the "in" section of the desired clip.
I've made a simple preloader to my animation and its works great except transition between last frame and second frame (1 frame is preloader). In animation it looks for a disappear for a moment. For many flashes it doesnt make problem but in my case I must have continuously play after loading my flash. I'm attaching a ".fla" file to my post. [URL]. I think I must use loop in timeline from 2 frame to last after the preloader appear... but how I can do that...
View 5 Repliesmy question is why the transition animation sosen't work on this code i already read the tutorial at kirupa, but im using diffrent code
View 5 Repliesi read the Preloader and Transition for Dynamic Files tutorial by claudio and i tried to use twise in the project. it works fine, the buttons work, in fact i did not change the code in the tutorial_complete.fla, i did the same for the photos.fla, and it works fine, but when i published the tutorial_completes.wf, i came with these two problems:
when i click the photos button in the tutorial_complete.swf, it load the photos.swf, but the code in the photos.swf does not work. it tried to change the name of the instance names and the labels, but nothing. the effect in the main buttons is great, but there is a broblem in the in the photos.swf buttons. files zipped here:[URL]
This pertains to the Preloader and Transition for Dynamic Files tutorial here on kirupa.
I've used this tutorial many times before but now for the first time i am using navigation that is inside a movie clip. instead of directly on the stage. I'm having problems with the content loading it just always says loading. Is there something that i would have to change in the transition code or my button code? all the code for my buttons is inside of nav_mc movie clip. here is my fla. to take a look at
I have a swf which has a UI loader component. I have to fade it in & have a pre loader while it takes time for the image to load.
View 1 Repliesim making my portfolio website and i was wondering if its possible to make 2 things:
1) crossfade transition effect between photos like: [url].... (i know site isn't flash) (when loaded click on f.ex. editorial location, left side click is previous and right side next)
2) first photo on category as a preloader (filling up from top to bottom). i got my photos in category too (on different swf files) and for now im using simple strip preloader.
I've found this tutorial on kirupa.com and i can't use it in flash as3 ( its as2 source code) . Dont know how to transform it into as3.
[URL]
I've change _root. with MovieClip(root).
I can't do anything with this:
Code:
onClipEvent (enterFrame) { if (!loaded && this._url != _root._url) {
if (this.getBytesLoaded() == this.getBytesTotal()) {
loaded = true;
[code]....
I used the 'Preloader and Transition for Dynamic Files' Tutorial from the tutorials section
here is a link [URL] and have to say, I learned soooo much from it, and incorporated it into my website [URL]. How to put a percentage preloader for each of the sections when they load. The heavier the .swf file you are loading, the longer it takes, and I've gotten comments about this saying they would like to know how long they have to wait until they see something.
Anyone know how to do this 3D page flip transition?When you click the menu it will flip the background before transitioning the new text
View 4 RepliesI would like to make the site below. [URL] I want to do a transition in and out First, In the site (btn1) 1st page( mc?) is slided in, and then, when click the buttons in the navigation bar is clicked (btn2) to go to 2nd page 1st page will be slide out, then
View 1 RepliesI would like to make the site below. [URL] I want to do a transition in and out First, In the site (btn1) 1st page( mc?) is slided in, and then, when click the buttons in the navigation bar is clicked (btn2) to go to 2nd page 1st page will be slide out, then
View 2 RepliesLooking for way to create page transition for flash website as in Mac OS when you minimize window its like getting sucked in pipe in lower left of the screen. where i find plugin or how i create that from scratch?
View 1 RepliesAlright, I wanna know how toave a transition animation play when the user moves to another section in a Flash site.Would it be possible to make the entire timeline of a loaded movieclips play backwards to the 1st frame before it is unloaded and the next section is loaded in? or is there some more advanced AS involved in having an outro transition?
View 2 Repliesi found out when i add a dynamic mask to my preloader progress bar (for transition out) its not scaling correct. I think its because my bar isn�t tweening to the correct "stageWidth" during progress until it completes. I setted it up like that:
// Preloder Progress Bar
Code:
bar.scaleX = 0;
bar.graphics.beginFill(0xff3333,1);
bar.graphics.drawRect(0,0,stage.stageWidth,4);
[code]....
Somehow it looks like 100% of the loading progress doesn�t represent the entire stageWidth so my bar animation finishes some pixels before reaching stageWidth end. NowJust noticed it now after adding a dynamic mask to my preloaders progress bar.
[URL] The website button function and External swf transition scripting is base on that tutorial. it would be great if i could let peoples to see the preloading process while my web loading the external swf file.. can any one here tell me how to add a preloader to show loading progress every time the external swf files loading?
View 2 RepliesANYONE KNOW HOW TO Preloader and Transition for Dynamic Files AND Transitions Between External SWFs MIX TOGHETER...
View 1 RepliesI have my site set up so each page is its own movieclip, and when my buttons get clicked, they tween alpha out from the current page and then tween alpha in to the desired page.This works most of the time, but I do get those odd occurrences where the tween (whether it be from fade in or fade out) just stops - leaving the page with a half alpha.I've tried everything from renaming my variables in my functions to making them the same names, and to no avail.
CODE
var currentPage:MovieClip = index;
var nextPage:MovieClip;
[code]....
I've been working on a site that would look like an interface of an Ipad..and I just want to know what code should i put when I click on 1 icon appliction..it would switch to another page..but the transition movement is like the new page will zoom in to full screen.
View 1 RepliesWhat are possible ways to implement page transition effects in flash?
View 2 RepliesI have my site set up so each page is its own movieclip, and when my buttons get clicked, they tween alpha out from the current page and then tween alpha in to the desired page.
This works most of the time, but I do get those odd occurrences where the tween (whether it be from fade in or fade out) just stops - leaving the page with a half alpha.
I've tried everything from renaming my variables in my functions to making them the same names, and to no avail.[code]...
Any one know of any tutorials or sources that showcase this effect? [URL] It's the effect when you click on the photo and the stage twists
View 4 RepliesI'm currently working on a site that has several buttons for several sections. Each section has its own transition. My question is, if I click on button 1, section 1 content appears, now when I click on button 2, section 1 content fades away and section 2 content fades in and so on with the rest of the buttons and sections.
View 3 RepliesIs it possible to make page transition effect using flash MX. The entire home page is made using flash. When the user clicks on the links the page transition (that is like when we turn the pages in a book ) comes and next page comes.
View 1 RepliesIs it possible to make page transition effect using flash MX. The entire home page is made using flash. When the user clicks on the links the page transition (that is like when we turn the pages in a book ) comes and next page comes.
View 1 RepliesI am trying to build a page transition in Flash. The way I have it set up right now is as follows:
1) I have a movieClip with the transition animation.
2) I have two buttons, both MovieClips. And the actions layer of my timeline is scripted as follows:
Code:
stop();
mybutton1.onRelease=function(){
navVar="firstpage"
_root.transitionClip.play();
} mybutton2.onRelease=function(){
navVar="secondpage"
_root.transitionClip.play();
}
3) The last from of my Transiition movieClip I have this code:
Code:
stop()
if(navVar=="firstpage"){
_root.gotoAndPlay(navVar);
}else if(navVar=="secondpage"){
_root.gotoAndPlay(navVar);
}
When I click on the buttons, they are loading the transitionClip movieClip. But they are not moving to the correct framelabel after they hit the last frame of that movieClip.
i was just curious on how i would go about recreating the transition effect you see when navigating through the menu on this page.
View 4 RepliesHow can I add a Squeeze transition effect between frames using the transition manager class on a simple slideshow using the goBack and goForward functions in ActionScript3? Below is the code I have so far:
stop();
function goBack(event:MouseEvent):void
{[code].....
I have a .swf with my animation. Then I have another .swf that contains my preloader. I haven't used preloaders before. I usually just publish my .fla to an html page and upload to my website. But if I have a preloader (another .swf), how would I go about setting that up on an html page?
View 2 Replies
